Kibrete, F., Woldemichael, D. E., Gebremedhen, H. S., & Batu, T. (2025). Free and Open‐Source Python‐Based Software Packages for Digital Image Correlation in Full‐Field Displacement and Strain Measurements. Strain, 61(4), e70012. https://doi.org/10.1111/str.70012
Kibrete, F., Woldemichael, D. E., & Gebremedhen, H. S. (2025). Transfer Learning‐Based Domain‐Adaptive One‐Dimensional Convolutional Neural Network for Fault Diagnosis of Rotating Machines. Engineering Reports, 7(7), e70258. https://doi.org/10.1002/eng2.70258
Kibrete, F., Woldemichael, D. E., & Gebremedhen, H. S. (2025). Hierarchical Adaptive Wavelet-Guided Adversarial Network with Physics-Informed Regularization for Generating Multiscale Vibration Signals for Deep Learning-Based Fault Diagnosis of Rotating Machines. Automation, 6(2), 14. https://doi.org/10.3390/automation6020014
Kibrete, F., Woldemichael, D. E., & Gebremedhen, H. S. (2025). Rotating Machinery Fault Diagnosis Using One-Dimensional Convolutional Neural Network. In Sustainable Development Research in Manufacturing, Process Engineering, Green Infrastructure, and Water Resources: Advancement of Science and Technology (pp. 83-94). Cham: Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-77339-6_5
Feisa, T. T., Gebremedhen, H. S., Kibrete, F., & Woldemichael, D. E. (2025). One‐Dimensional Deep Convolutional Neural Network‐Based Intelligent Fault Diagnosis Method for Bearings Under Unbalanced Health and High‐Class Health States. Structural Control and Health Monitoring, 2025(1), 6498371. https://doi.org/10.1155/stc/6498371
F Kibrete, DE Woldemichael, HS Gebremedhen , Optimization of Sample Size, Data Points, and Data Augmentation Stride in Vibration Signal Analysis for Deep Learning-Based Fault Diagnosis of Rotating Machines, Shock and Vibration 2025 (1), 5590157 , https://doi.org/10.1155/vib/5590157
Ibrahim, A.U., Woldemichael, D.E. "New Hybrid Critical Plane Approach for Fatigue Life Estimation and Damage Assessment of Multiaxial Cyclic Loading," International Journal of Engineering Trends and Technology, vol. 72, no. 4, pp. 226-237, 2024, https://doi.org/10.14445/22315381/IJETT-V72I4P124
F Kibrete, DE Woldemichael, HS Gebremedhen, Multi-Sensor data fusion in intelligent fault diagnosis of rotating machines: A comprehensive review, Measurement, 2024, 114658,ISSN 0263-2241, https://doi.org/10.1016/j.measurement.2024.114658.
Ibrahim, A.U., Woldemichael, D.E. "Review of the Techniques for Life Prediction and Cumulative Damage of Multiaxial Fatigue Loading," International Journal of Engineering Trends and Technology, vol. 72, no. 2, pp. 203-221, 2024. https://doi.org/10.14445/22315381/IJETT-V72I2P122
Tolcha, D.A. and Woldemichael, D.E. (2023). Development and characterization of short glass fiber reinforced-waste plastic composite filaments for 3D printing applications. DOI https://doi.org/10.1016/j.heliyon.2023.e22333
G. A. Dress, E. G. Koricho, Y. Regassa, D. E. Woldemichael, and A. D. Woldeyohannes, "Multi objective optimization methods for damage assessment of composite laminates: A review," Composite Structures, vol. 327, p. 117655, 2024. https://doi.org/10.1016/j.compstruct.2023.117655
Ibrahim, A.U., Woldemichael, D.E. , Development of a Novel Tool used to Support Design and Failure Analysis of Multiaxial Fatigue Loading: A case of Steering Knuckle, ARPN Journal of Engineering and Applied Sciences , 2023, 18(12), pp. 1433–1443
Gebremedhen, H.S., Woldemichael, D.E., Hashim, F.M., Altaf, K., Chong, H.C. (2023). Effect of Filtering Techniques in Manufacturing of Optimal Topologies Using Additive Manufacturing. In: Woldegiorgis, B.H., Mequanint, K., Getie, M.Z., Mulat, E.G., Alemayehu Assegie, A. (eds) Advancement of Science and Technology . Green Energy and Technology. Springer, Cham. https://doi.org/10.1007/978-3-031-33610-2_9
Kibrete F, Trzepieciński T, Gebremedhen HS, Woldemichael DE.(2023). Artificial Intelligence in Predicting Mechanical Properties of Composite Materials. Journal of Composites Science. 2023; 7(9):364. https://doi.org/10.3390/jcs7090364
Kibrete, F., Woldemichael, D.E. (2023). Applications of Artificial Intelligence for Fault Diagnosis of Rotating Machines: A Review. In: Woldegiorgis, B.H., Mequanint, K., Bitew, M.A., Beza, T.B., Yibre, A.M. (eds) Artificial Intelligence and Digitalization for Sustainable Development. ICAST 2022. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, vol 455. Springer, Cham. https://doi.org/10.1007/978-3-031-28725-1_4
Bezzie, Y. M., & Woldemichael, D. E. (2022). Investigating the graded-index influence on elastic responses of axisymmetric pressurized and heated thick-walled functionally graded material of cylindrical vessel. Forces in Mechanics, 7, 100099 . https://doi.org/10.1016/j.finmec.2022.100099
Bezzie, Y. M., & Woldemichael, D. E. (2021). Effects of graded-index and Poisson's ratio on elastic-solutions of a pressurized functionally graded material thick-walled cylinder. Forces in Mechanics, 4, 100032. https://doi.org/10.1016/j.finmec.2021.100032
Woo, S., O’Neal, D. L., Woldemichael, D. E., Atnaw, S. M., & Tulu, M. M. (2021). Improving the Fatigue of Newly Designed Mechanical System Subjected to Repeated Impact Loading. Metals, 11(1), 139. https://doi.org/10.3390/met11010139
Woo, S.-w., Woldemichael, D. E., Atnaw, S. M., Tulu, M. M., & ONeal, D. L. (2020). Reliability Design of Mechanical Systems Subjected to Repetitive Stresses. Material Science, 2(1), 1-11. DOI: https://doi.org/10.35702/msci.10007
Gebremedhen, H. S., Woldemichael, D. E., & Hashim, F. M. (2020). A firefly algorithm-based hybrid method for structural topology optimization. Advanced Modeling and Simulation in Engineering Sciences, 7(1), 44. https://doi.org/10.1186/s40323-020-00183-0.
Gebremedhen, H.S., Woldemichael, D.E., and F.M. Hashim (2019), Three-dimensional stress-based topology optimization using SIMP method. International Journal of Simulation and Multidisciplinary Design Optimization 10, A1:1-10 (2019). https://doi.org/10.1051/smdo/2019005
Dereje Engida Woldemichael, Enhancing Active Learning in Large Classes Using Web Clicker. Pertanika J. Soc. Sci. & Hum. 26 (S): 111 - 120 (2018). Q3
Gebremedhen, H.S., Woldemichael, D.E., and F.M. Hashim (2017), Effect of Modeling Parameters in SIMP Based Stress Constrained Structural Topology Optimization. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol:17 No:06, pp 32-39. Q3
Gilani, S.E, Al-Kayiem, H.H., Woldemichael, D.E., and Gilani, S.I, (2017) Performance enhancement of free convective solar air heater by pin protrusions on the absorber, Solar Energy, 151, pp173-185. IF3.71 Q1. https://doi.org/10.1016/j.solener.2017.05.038
Woldemichael, D.E. & Woldeyohannes, A. D. (2016). Optimization of Pressure Vessel Design using PyOpt. ARPN Journal of Engineering and Applied Sciences 11(24), pp 14264 -14268. Q3.
Gilani, S.E, Al-Kayiem, H.H., Woldemichael, D.E., and Gilani, S.I, (2017). Enhancement of The Heat Transfer Rate in Free Convection Solar Air Heater Using Pin Shaped Artificial Roughness on Absorber Plate, ARPN Journal of Engineering and Applied Sciences 11(22), pp 12953 -12958. Q3.
Woldeyohannes, A. D., Woldemichael, D.E., & Baheta, A. T. (2016). Sustainable renewable energy resources utilization in rural areas. Renewable and Sustainable Energy Reviews, 66, pp1-9. IF 9.184. https://doi.org/10.1016/j.rser.2016.07.013
Gebremedhen, H. S., Woldemichael, D.E., and F. M. Hashim (2016). "A literature survey on challenges in stress-based topology optimization." ARPN Journal of Engineering and Applied Sciences 11(24), pp14188-14194. Q3.
Gebremedhen, H. S., Woldemichael, D.E., and F. M. Hashim (2016). "Structural topology optimization subjected to relaxed stress and design variables." ARPN Journal of Engineering and Applied Sciences 11(10), 6490-6495. Q3.
Altaf, K., A. M. A. Rani, Woldemichael, D.E., T. A. Lemma and C. Zhi (2016). "Application of additive manufacturing/3D printing technologies and investment casting for prototype development of polycrystalline diamond compact (pdc) drill bit body." ARPN Journal of Engineering and Applied Sciences 11(10), pp 6511-6516. Q3.
Gilani, S.E., Al-Kayiem, H.H. and Woldemichael, D.E., (2016), Effect of conical pin arrangement on heat transfer efficiency of a free convective solar air heater, Journal of Mechanical Engineering and Sciences (JMES), 10(2), pp 2053-2064. Q2.
AD Woldeyohannes, Woldemichael, D.E., L Chye, EZ Ru. (2015) Transportation Algorithm for Optimizing Renewable Energy Resources Utilization at Rural Areas. Applied Mechanics and Materials 699, 853-857. https://doi.org/10.4028/www.scientific.net/AMM.699.853
Woldemichael, D.E., J.J Lai, D Sujan, Topology Optimization of Beam Structures with Various End and Loading Conditions. Applied Mechanics and Materials (2014) 465, 22-26. https://doi.org/10.4028/www.scientific.net/AMM.465-466.22
D Sujan, TK Piaw, Woldemichael, D.E., Thermo-Mechanical Stress Analysis in Electronic Packaging with Continuous and Partial Bond Layer. Applied Mechanics and Materials (2014) 465, 50-54. https://doi.org/10.4028/www.scientific.net/amm.465-466.50
Woldemichael, D.E., Abraham D.W.,Hoe K. C.and Lim C. I., Design Support System for Parabolic Trough Solar Collector. Journal of Applied Sciences (2012) 12, 2474-2478.
Woldemichael, D.E. and F. M. Hashim. A Framework for Function-Based Conceptual Design Support System. Journal of Engineering, Design and Technology, Vol 9, No. 3, (2011) pp. 250-272. https://doi.org/10.1108/17260531111179898
Woldemichael, D.E., F.M. Hashim, and D. Sujan, A knowledge-based conceptual design support system. Advanced Materials Research Vols. 308-310 (2011) pp 1540-1545.
Sujan D., Muhammad E.R., Woldemichael, D.E., M. V. V. Murthy, and K. N. Seetharamu, Bi-layered model of interfacial thermal stresses with the effect of different temperatures in the layers. Applied Mechanics and Materials Vol. 87(2011) pp 63-70.
Sujan D., Woldemichael, D.E., Murthy, M.V.V., and Seetharamu K.N., Effect of bond layer on bi-material assembly subjected to uniform temperature change, Journal of Electronic Packaging, Transactions of the ASME, (2011) 133(4), art. No. 041014. IF 2.21 Q2
Woldemichael, D.E. and F. M. Hashim. Development of Conceptual Design Support Tool for Subsea Process Equipment Design. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol:09 No:10(2009) pp. 1-6.
Kibrete, F., Woldemichael, D.E. (2023). Applications of Artificial Intelligence for Fault Diagnosis of Rotating Machines: A Review. Artificial Intelligence and Digitalization for Sustainable Development. ICAST 2022.
Umer, Aliyi, Dereje Engida, GM Sayeed Ahmed, and U. Pranavi. "Evaluation of T-72 tank driver seat based on anthropometric dimensions of Ethiopian military tank drivers." In AIP Conference Proceedings, vol. 2648, no. 1, p. 030002. AIP Publishing LLC, 2022. DOI: https://doi.org/10.1063/5.0128524
Bezzie, Y. M., Woldemichael, D. E., Chekol, E. T., Admass, S. A., Selvaraj, S. K., & Paramasivam, V. (2021). Effect of volumetric fraction index on temperature distribution in thick-walled functionally graded material-made cylinder. Materials Today: Proceedings, 46, 7442-7447. DOI: https://doi.org/10.1016/j.matpr.2021.01.042
Woldeyohannes, A. D.& Woldemichael, D.E., Developing Renewable Energy Alternative Sources Evaluating Model under Multiple Decision Criteria, AIP Conference Proceedings 2035, 050006 (2018). DOI: https://doi.org/10.1063/1.5075577
Gebremedhen, H.S., Woldemichael, D.E., and F.M. Hashim (2017). "A comparative study on stress and compliance based structural topology optimization", IOP Conf. Series: Materials Science and Engineering 241 (2017) 012003. DOI: https://doi.org/10.1088/1757-899X/241/1/012003
Woldemichael, D.E. (2017), A Hybrid Student-centred Learning Instructional Approaches for a Lecture Based Engineering Class, 7th World Engineering Education Forum (WEEF), Kuala Lumpur, Malaysia, from 13-16 November 2017. DOI: https://doi.org/10.1109/WEEF.2017.8467115
Woldemichael, et al, (2016). Modelling and Simulation of Free Floating Pig for Different Pipeline Inclination Angles. MATEC Web of Conferences 77, 02010. DOI: https://doi.org/10.1051/matecconf/20167702010
Woldemichael, D.E. and Zainuddin, A., “Adopting and implementing Active Learning and Cooperative Learning Approaches in Lecture Based Engineering Classes” 6th Regional conference in Engineering Education (RCEE2016), UTM, Kuala Lumpur, 9-10 August 2016.
Woldemichael, D.E.., A. A. Rani, T. Lemma, and K. Altaf, "Numerical simulation of rock cutting using 2D AUTODYN," IOP Conference Series: Materials Science and Engineering, vol. 100, p. 012052, (2015).DOI: https://doi.org/10.1088/1757-899X/100/1/012052
Woldemichael, D.E., and F.M. Hashim. Web-based conceptual design support system, in 2015 5th International Workshop on Computer Science and Engineering: Information Processing and Control Engineering, WCSE 2015-IPCE. 2015. Science and Engineering Institute. DOI: https://doi.org/10.18178/wcse.2015.04.082
Woldemichael, D.E., FM Hashim, Progressive Concept Evaluation Method for Automatically Generated Concept Variants. MATEC Web of Conferences (2014) 13, 04007. DOI: https://doi.org/10.1051/matecconf/20141304007
Woldemichael D.E, Abraham D.W., Hoe K. C. and Lim C. I., Design Support System for Parabolic Trough Solar Collector, International Conference on Production, Energy and Reliability (ICPER2012), 12-14 June 2012, Kuala Lumpur, Malaysia.
Abraham D.W., Dereje E.W. and Lim Chye Ing, Fishbone Diagram Approach for Improving the Passing rate for Basic Engineering Subjects, In Enhancing Learning: Teaching & Learning Conference 2011 An international conference on Teaching and Learning in Higher Education, 25-26 November 2011, Miri Sarawak Malaysia.
Wong Jiun Ming and Woldemichael D.E., Design and Construction of Parabolic Trough Collector, 3rd CUTSE International Conference, CUTSE 2011 8-9 November 2011, Miri Sarawak, Malaysia.
Hoe Kam Cheng and Woldemichael D.E., Parabolic Trough Collector Simulation Software, 3rd CUTSE International Conference, CUTSE 2011, 8-9 November 2011, Miri Sarawak, Malaysia.
Bernard Huang Chee Soon, and Woldemichael D.E., Design of collecting and separating systems for mechanical pepper harvester, 3rd CUTSE International Conference, CUTSE 2011 8-9 November 2011, Miri Sarawak, Malaysia.
Keong N.K. and Woldemichael D.E. Development of gear designing software, CUTSE 2010 Conference, Curtin University Sarawak Malaysia, November 26-28 2010.
Woldemichael, D. E. and F. M. Hashim. A Conceptual Design Support Tool for Subsea Process Equipment Design. NPC 2009, Universiti Teknologi petronas, Malaysia, 25-26 March 2009.
Woldemichael, D. E. and F. M. Hashim. Concept Modeler: A Computer Aided Conceptual Design Support Tool. International Graduate Conference on Engineering and Sciences (IGCES 2008), UTM, Johor Bahru, Malaysia,23-24 December 2008.
Woldemichael, D. E. and F. M. Hashim. Development of Computer Aided Conceptual Design Tool for Oil and gas Separator Design. NPC 2008, Universiti Teknologi Petronas, 2008.
Woldemichael, D. E. and F. M. Hashim. Development of Computer Aided Conceptual Design Tool for Subsea Process Equipment Design. Proceedings of Conference on Design, Simulation, Product Development and Optimization, pp 1-6, 10-11 December 2007, Batu Feringghi, Penang, Malaysia.
Dereje Engida Woldemichael (2018) “Engaging students in large classes using free web-based classroom response system”, Teaching and Learning in Higher Education: Innovation for Engineering & Technology Education, UTP Press.
Woldemichael, D.E., (2016) “Web Clicker Intervention to Enhance Active Learning in Large Classes without Purchasing Clickers” in CEE Book Series, International Innovative Practices in Higher Education Expo I-PHEX2016, ISBN 978-967-0194-64-6.
Woldemichael, D.E. and Azman Zainuddin, (2015) “Using Active Learning and Cooperative Learning Approaches in Traditional Lecture-Based Engineering Class: A Case of Dynamics Course”, In CEE Book Series, International Innovative Practices in Higher Education Expo I-PHEX2015, ISBN: 978-967-0194-50-9.
Dereje Engida Woldemichael, Conceptual Design Support Tool (CDST): A Function-based Computer-Aided Conceptual Design Support System, LAP Lambert Academic Publishing. December 2011 [ISBN: 978-3-8473-2168-2].
Dereje Engida and Tamiru Alemu. “Technical Drawing: a student textbook for grade 12”, Aster Publishing Company, Addis Ababa, Ethiopia, 2005.