Scramjets are a promising technology that could enable cruise at hypersonic speeds, enabling travel from Miami to Tokyo in a few hours. However, key uncertainties remain in scramjet aerodynamics that must be reconciled before adoption of the technology to flight vehicles. Key areas of scramjet research include inlet design, off-design operation, and supersonic combustion.
Scramjet unstart occurs when a series of shock waves (termed the pre-combustion shock train) are disgorged from the isolator, forming an unstart shock in front of the inlet. The unstarted flow field is highly unsteady, with significant temporal variation in the thrust produced by the engine, overall engine flow structure, and vehicle controllability. The DASH lab has done a significant amount of work characterizing unstarting flow fields using global measurement techniques such as pressure-sensitive paint, temperature-sensitive paint, and background-oriented schlieren. Emphasis was placed on the impact of overall engine design, with experiments run on axisymmetric and streamtraced configurations.
The DASH lab remains interested in streamtraced inlet design, fundamental unstart physics, and implementation of active and passive flow control to push the operational envelope of scramjets and ramjets to their limits.
Below Figure: The Indiana Inlet (INlet). A streamtraced Busemann inlet designed as a collaboration between Purdue University, the University of Notre Dame, and the Air Force Research Lab.
Above Video: Simutaneous background-oriented schlieren and pressure-sensitive paint measurements of the INlet cowl region and isolator surface, respectively. Unstart is induced by transverse injection of air at the downstream end of the isolator. The upstream extent of the back pressure influence is given by the shock-train leading edge, identified as the black line in the pressure contour. Substantial buzz behavior is observed after unstart, with large oscillations in the isolator pressure and unstart shock position.