Free-Piston Reflected Shock Tunnel
A new free-piston reflected shock tunnel (RST) is currently being designed at Embry-Riddle Aeronautical University (ERAU) and is expected to be operational in 2028. This will be the third free-piston shock tunnel in the United States and the second such facility in academia. Compared to conventional gas driven shock tunnels, a free-piston driver can generate much higher shock speeds and total enthalpy conditions. This RST will be generate a broad range of conditions representative of Mach 6 to 20 flight, enabling research in areas such as scramjet propulsion, high-enthalpy shock-wave/boundary-layer interactions, and nonequilibrium aerothermodynamics.
This facility accelerates a piston down a compression tube to velocities up to hundreds of meters per second. The piston compresses the driver gas to a fraction of its initial volume, dramatically raising its temperature and pressure. Typical driver gases include helium, argon, and nitrogen. A primary diaphragm bursts, generating a shock wave which travels through a driven section filled with test gas. The reflection of this shock at the end wall creates a stagnant slug of high enthalpy and high-pressure gas. This gas serves as a reservoir that feeds a converging diverging nozzle to create hypersonic and hypervelocity flows.
The expected operational envelope of the RST will be total specific enthalpies of 1.8 MJ/kg to 20 MJ/kg and total pressures up to 200 MPa. Mach 6 flow at flight-matched enthalpy will be able to be sustained for several milliseconds while a 20 MJ/kg 150 MPa condition will be produced for about one millisecond. There will be capability to utilize nozzles with exit diameters of 300 mm to 700 mm. This RST will have a 15 m long piston compression stroke and a driver tube with a 304.8 mm inner diameter. The driven tube will be 9 m long with a 101.6 mm inner diameter. A state-of-the-art test section will allow for significant optical access with 20 ports capable of utilizing a variety of windows.
Efforts have been made to incorporate numerous diagnostics into the facility to characterize its operation. PCB transducers will be spaced along the shock tube to resolve the incident shock speed. Upstream facing PCBs at the primary diaphragm station will measure the compression tube pressure during the entire piston stroke. Accommodations are being made to measure the piston velocity history using light detection and ranging, inertial measurement units, and/or optical waypoint measurements. An initial suite of diagnostics will be used in the test section during experiments, including self-aligned focusing schlieren, a mid-wave infrared camera, focused laser differential interferometry, tunable diode laser absorption spectroscopy, and a variety of pressure and heat flux sensors.
Diagnostic Development Capabilities
A variety of small facilities exist in the lab to characterize advanced diagnostics such as pressure- and temperature-sensitive paint. The step response of sensors and luminescent paints can be determined via a small shock tube. A resonance tube allows frequency response characterization of sensors up to 20 kHz. Static measurements of paint luminescent intensity, pressure sensitivity, and temperature sensitivity can be made via a pressure-temperature chamber. A Jasco FP-8550 spectrofluorometer allows for characterization of the excitation and emission spectra of candidate luminophores in the visible and UV regions. An exhaustive list of lab equipment is provided in the HAMMER lab overview: Hypersonics and Advanced Measurement Methodologies for Experimental Research (HAMMER) Lab.
Many More to Come!