Embedded Files
Must be designed in SolidWorks
Prepared in a slicer for additive manufacturing
3D printed in PLA filament
An individual link cannot take up more space than 20mm²
Test prints (no more than two links) are required before full prints (no more than 5 links)
No slicer-generated supports allowed
Roller Chain
Roller Chain
Desktop Topper Modeling/Printing Challenge
Challenge Objective - 3D model an object that represents you. This must be of your own design and fit the top of the monitor. Unlike the previous year, you share this computer station with another student from another class. As you build your model, refer to the following criteria
Criteria
Must be designed in SolidWorks
Prepared in a slicer for additive manufacturing
3D printed in PLA filament
The object cannot take up more space than as 80mm sphere.
Unlike the previous year, you must create a ring to fit over the vertical monitor support. Make sure to use a caliper to measure. Don’t rely on a peer’s measurements. The object will then somehow be attached to the side of the ring so that the other student from the other class can also display their project on the other side of the support.
Test prints for the ring support are required before full prints (this has to be displayed on the ePort).
Page updated
Google Sites
Report abuse