AC Circuit

0. No points are taken off for late submission, since this lab is too difficult.

1. Please specify the chips you use.

2. To calculate the inductance of the inductor, you should use equation: omega = 1/sqrt(L C). However, in this equaiton, the omaga is the angular frequency, so you should multiply the frequency you measured by 2*pi to get the angular frequency, otherwise the inductance will be off by ~1/(4*pi^2).

3. The theoretical bandwidth should be calculated from the calculated inductance of the inductor, not from the value given in the assignment.

4. The measured bandwidth should be the size of the frequency range: the range is between the minimum and maximum frequencies that corresponds to HALF of the maximum peak-to-peak voltage. (FYI: Full width half maximum, FWHM, is a term you may see a lot in the future.)