Embedded Files
Have picture of Bolt (W/Specs)
And Identification of Drill Bit for TAP
Have picture of Bolt (W/Specs)
And Identification of Drill Bit for TAP
See Below
1/4 th - 20 (Diameter & Thread Pitch) - Drill Size is 7 - Hex Bolt
Above is an image of the two Bolts.
3/8th - 16 (Diameter & Thread Pitch) : Drill Size is 5/16th - Hex Bolt
Video Of me Tapping/ Drilling the hole
see below
cm-chat-media-video-1:9027677d-63e6-5898-881a-e92303a8b2ec:717:4:0.movVideo and Image of me Drilling the hold in the metal.
Picture of me tapping the hole with the required threading.
Torque wrench Specs
See Below
Finding the diameter of the bold and threads per inch I was able to find the Foot Pounds Per inch using the chart provided.
Me torquing the bolt and nut :
I was abesnt on Friday and Jack was not in class for Monday. I was unaware of the crows foot. I discussed with Mr. Swick about it.
Me torquing the bolt and nut :
I was abesnt on Friday and Jack was not in class for Monday. I was unaware of the crows foot. I discussed with Mr. Swick about it.
Setting the Wrench to the required setting
Final Product
See Below
Page updated
Google Sites
Report abuse