107. Gulshan Verma, Ankur Gupta*, Next-Generation Chemiresistive Wearable Breath Sensors for Non-Invasive Healthcare Monitoring: Advances in Composite and Hybrid Materials, Small, 2025.  DOI: 10.1002/smll.202411495 (Impact Factor: 13)

106. Suraj Barala; Amit Kumar; Monika Kwoka; Ankur Gupta*, M Kumar*, Spillover effect in Pd Anchored NiO-ZnO Nanostructures improves Hydrogen Gas Sensor’s performance, Sensors and Actuators Chemical B, Volume 433, 15 June 2025, 137534. https://doi.org/10.1016/j.snb.2025.137534 (Impact Factor: 8)

105. Gulshan Verma, A. Basu, P. Ranjan, Ankur Gupta*, Room temperature operated flexible MWCNT/Nb2O5 hybrid sensor for the non-invasive detection of exhaled diabetes biomarker, Journal of Materials Chemistry B, 2025. DOI: 10.1039/D4TB02644F  (IF: 6.1)

104. Gulshan Verma, Suraj Barla, Mahesh Kumar, Ankur Gupta*, Hierarchical MoS2 Nanostructured Tubes on Biodegradable and Flexible Chitosan Based Platform for Low Temperature Hydrogen Detection, IEEE Sensors, 2025. (IF: 4.3)

103. Vishwa Bhanu, Shailesh M. Pandey, Ankur Gupta, Chandan Pandey, Dissimilar IN82 Buttered P91 and Incoloy 800HT Joint for AUSC Boilers: Microstructural Characteristics and Mechanical Properties, Metallurgical and Materials Transactions A, 56, 325–339 (2025). https://doi.org/10.1007/s11661-024-07653-9. (IF: 2.2).

102. Vinay Kishnani, Rahul Ashvinbhai Makadia, Satheesh Natarajan, Ankur Gupta*, Development of Silver-Polyaniline Functionalized Biosensor for Non-Enzymatic Lactic Acid Detection in Artificial Saliva, Materials Advances, 2025. (IF: 5.2) DOI: 10.1039/D4MA00813H.

101. Gulshan Verma, Monsur Islam, Ankur Gupta*, "ZnO Nanowires-Decorated 3D Printed Pyrolytic Carbon for Solar Light Driven Photocatalytic Degradation of Wastewater Contaminants", Advanced Composites and Hybrid Materials, 2025 (Impact factor: 23.2) https://doi.org/10.1007/s42114-024-01125-9.

2024

100. Gulshan Verma; Prashanth Venkatesan; Deblina Roy; Parthivi Aloni; Naresh Kumar Dega, Ankur Gupta*, Low Cost Fabrication of Continuous Flow Optofluidic Microreactor for Efficient Dye Degradation using Graphene QDs@MOF (Ti) Photocatalyst, Environmental Research, Volume 263, Part 3, 15 December 2024, 120207. https://doi.org/10.1016/j.envres.2024.120207 (IF: 7.7)

99. Vikas Pandey, Amit Kumar, Ahmed S Razeen, Sudhiranjan Tripathy, Ankur Gupta and Mahesh Kumar; Pd/AlGaN/GaN HEMT-based IoT-enabled room temperature H2 sensor, IEEE Sensors Journal, 2024. DOI: 10.1109/JSEN.2024.3487877 (IF: 4.3)

98. Prince Kumar Rai, Amritanshu Singh, Shashwat Bishwanathan, Prashant Kumar Gupta, De Yi Wang, Monsur Islam, Ankur Gupta*, Bi-metallic Electrochemical Deposition on 3D Pyrolytic Carbon Architectures for Potential Application in Hydrogen Evolution Reaction, Science and Technology of Advanced Materials, 2024. https://doi.org/10.1080/14686996.2024.2421740 (IF: 7.4)

97. Gulshan Verma, Prashanth Venkatesan, Suraj Barala, Mahesh Kumar, Naresh Kumar Dega, Ankur Gupta*, Hierarchical MoS2 Nanostructured Hollow Tubes on Biodegradable Flexible Platform for Low Temperature Hydrogen Gas Detection, IEEE Sensors, 2024.  (IF: 4.3)

96. Gulshan Verma, Hind Kadiri, Anisha Gokarna, Sumit Kumar, Mahesh Kumar, Gilles Lerondel, Ankur Gupta*, Flexible Hybrid Nanostructured Platform for Low-Temperature Chemiresistive Sensing with Enhanced Hydrogen Trace Detection, Sensors and Actuators B: Chemical, 2024. https://doi.org/10.1016/j.snb.2024.136621 (IF: 8.0)

95.  Vishwa Bhanu, Saravanakumar. R, Ankur Gupta, C. Pandey, Influence of Buttering Layers on the Microstructural Evolution and Mechanical Behavior of Incoloy 800HT and P91 Steel welded joint”, Archives of Civil and Mechanical Engineering, 24, 233 (2024). https://doi.org/10.1007/s43452-024-01044-y. (IF = 4.2)

94. Vishwa Bhanu, Daruiszh, Shailesh Pandey, Ankur Gupta, C. Pandey, “Advanced Ultra Super Critical Power Plants: Role of buttering layer”, International Journal of Advanced Manufacturing Technology, 2024. https://doi.org/10.1007/s00170-024-14469-9 (IF: 2.9)

93. Divyansh Mittal, Sandan Kumar Sharma, Jan Hostaša, Prabhat Chand Yadav, Chandan Pandey, Ankur Gupta, Dry sliding behaviour of transparent Yttrium Aluminium Garnet against 100Cr6 steel balls, International Journal of Applied Ceramic Technology, 2024, 1–14. https://doi.org/10.1111/ijac.14926. (IF: 1.8)

92. Arnab Ghosh, Sukhman Kaur, Gulshan Verma, Christian Dolle, Raheleh Azmi, Stefan Heissler, Yolita M. Eggeler, Dario Mager, Ankur Gupta, Jan G. Korvink , De-Yi Wang, Ashutosh Sharma, and Monsur Islam, Enhanced Performance of Laser-Induced Graphene Supercapacitors via Integration with Candle-Soot Nanoparticles, ACS Applied Materials and Interface, 2024. https://doi.org/10.1021/acsami.4c07094. (IF: 8.3)

91. Gulshan Verma, Anisha Gokarna, Hind Kadiri, Gilles Lerondel, Ankur Gupta*, ZnO Nanowires Growth on a Metal Seeded Flexible Substrate via Chemical Bath Deposition: An Insight into Parametric Analysis and a Predictive Approach, accepted in Applied Materials Today, 2024. (IF: 7.2)

90. Gulshan Verma, Monsur Islam, Ankur Gupta*, ZnO Nanowire-Decorated 3D Printed Pyrolytic Carbon for Solar Wastewater Degradation, Accepted to Materials Today Sustainability, 2024. (IF: 7.1)

89. Prince Rai, Ankur Gupta*, “Development of Pulse electroformed Cu/SiC composite tubes for enhanced mechanical and anti-corrosion properties, Archives in Civil and Mechanical Engineering, 24, 19 (2024). https://doi.org/10.1007/s43452-023-00830-4 2023. (IF: 4.4)

88. Gulshan Verma, Monsur Islam, Kunal Mondal, Ankur Gupta*, Recent Advances in Advanced Micro and Nanomanufacturing for Wastewater Purification, ACS Applied Engineering Materials, 2024. https://doi.org/10.1021/acsaenm.3c00711.

87. Usama Zafara, Prince Rai, Ankur Gupta*, Jan G. Korvink, Vlad Badilita, and Monsur Islam, Laser-induced copper/graphene nanocomposite from anodically electrodeposited chitosan for H2O2 sensing, Carbon, 2024. Doi: 10.3390/c10020028. (IF: 3.9)

86. Monsur Islam, Kunal Mondal, Vinay Kishnani, Ankur Gupta, and Ashutosh Sharma, Synthesis of High-surface-area Mesoporous SnO2 Nanomaterials using Carbon Template, Next Nanotechnlogy, Volume 5, 2024, 100057. https://doi.org/10.1016/j.nxnano.2024.100057. 

85. Saurabh Rathore, Amit K, Sachin S, Shailesh M P, Ankur Gupta, Dariusz F, Chandan P. “Advanced Ultra Super Critical Power Plants: Role of buttering layer”, International Journal of Advanced Manufacturing Technology, (IF: 2.9).

84. Saurabh Rathore; Amit Kumar; Sachin Sirohi; Vivek Singh; Ankur Gupta; Dariusz Fydrych; Chandan Pandey, “Role of buttering layer composition on microstructural heterogeneity and mechanical properties of Alloy 617 and P92 steel dissimilar welded joints for future Indian AUSC program”, International Journal of Advanced Manufacturing Technology, 2024. DOI: 10.1007/s00170-024-13747-w. (IF: 2.9)

83. Vishwa Bhanu, Chandan Pandey, Ankur Gupta, Dariusz Fydrych, Microstructural Evolution and Mechanical Behavior of Activated Tungsten Inert Gas Welded Joint Between P91 Steel and Incoloy 800HT, International Journal of Advanced Manufacturing Technology, 134, 223–244 (2024). https://doi.org/10.1007/s00170-024-14117-2. (IF: 2.9)

82. Vishwa Bhanu, Ankur Gupta, Chandan Pandey, Microstructure-linked mechanical properties of P91-Incoloy 800HT dissimilar metal weld, The Welding Journal, 2024.

2023

81. Verma, Gulshan; Gokarna, Anisha; Kadiri, Hind; Nomenyo, Komla; Lerondel, Gilles; Gupta, Ankur, Multiplexed Gas Sensor: Fabrication strategies, Recent Progress, and Challenges, ACS Sensors 2023. (IF: 8.2)

80. Prince Rai; Vishav Kant; Rakesh Kumar Sharma, Ankur Gupta, Process Optimization for Textile Industry-based Wastewater Treatment via Ultrasonic-assisted Electrochemical Processing, International Scientific Journal Engineering Applications of Artificial Intelligence, 2023. (IF: 7.5)

79. Prince Rai, Ankur Gupta, “Development of durable anticorrosion superhydrophobic electroformed copper tubular structures.” Journal of Manufacturing Processes 85 (2023): 236-245. (IF: 6.1)

78. Hrudaya Jyoti Biswal, Pandu R. Vundavilli, Kunal Mondal, Nagaraj P. Shetti, Ankur Gupta, ZnO/CuO nanostructures anchored over Ni/Cu tubular films via pulse electrodeposition for photocatalytic and antibacterial applications, Materials Science for Energy Technologies, Volume 6, 2023, Pages 237-25.

77. Gulshan Verma, Monsur Islam, Ankur Gupta, “TiS2 nanoparticle-anchored candle soot decorated carbon nanofibers based hydrophobic/oleophilic membrane for oil/water separation, ACS ES&T Water, 2023. https://doi.org/10.1021/acsestwater.3c00445. (IF: 4.8)

76. Kishnani, Vinay; Ankur Gupta, “Predictive framework development for user-friendly on-site glucose detection”, ACS Applied Bio Materials, 2023. https://doi.org/10.1021/acsabm.3c00532. (IF: 4.7)

75. Nipun Sharma, Arunkumar Sakthivel, Subbiah Alwarappan, Ankur Gupta, Sudhiranjan Tripathy, and Mahesh Kumar, “Ultrasensitive real time detection of Pb2+ ions using g-C3N4 nanosheets”, IEEE Sensors, 2023. (DOI: 10.1109/JSEN.2023.3264969). (IF: 4.3)

74. Gulshan Verma, Saloni Singhal, Ankur Gupta, Nature inspired Ficus religiosa leaf mesh coated with antibacterial ZnO/PANi@PMMA nanocomposite for oil/water separation and photocatalytic applications, submitted to Catalysis communications, Volume 185, December 2023, 106806. (IF: 3.7)

73. Prince Rai, Ankur Gupta, “Electroforming Process for Microsystems Fabrication: A Comprehensive Review”, Journal of Electrochemical Society, 2023. (IF: 3.2)

72. Shrishti Kumari, M. Islam, Ankur Gupta, Multiplex Detection on Paper for Inexpensive Biosensing Applications: A Comprehensive Review, Biomedical Microdevices 2023. (IF: 3.0)

71. Vishwa Bhanu, Aniruddha Malakar Ankur Gupta, C. Pandey, Electron beam welding of P91 steel and incoloy 800HT and their microstructural studies for advanced ultra super critical (AUSC) power plants, International Journal of Pressure Vessels and Piping, Volume 205, October 2023, 105010. (IF: 3.0)

70. Gulshan Verma, Saloni Singhal, Prince Kumar Rai, Ankur Gupta, “Simple Approach to Develop Paper Based Biosensor for Realtime Uric Acid Detection”, RSC Analytical Methods, 2023. (IF: 2.7)

69. Vishwa Bhanu, Ankur Gupta, C. Pandey, Activated-TIG Weld Characteristics of P91 Joint for Advanced Ultra Super critical (AUSC) Power Plant Applications, Journal of Materials Engineering and Performance, 2023. https://doi.org/10.1007/s11665-023-08814-4. . (IF: 2.2)

68. Gulshan Verma, Vikas Pandey, Monsur Islam, Mahesh Kumar,  Ankur Gupta,  Room Temperature Operated Flexible La-ZnO/MWCNTs Sensor for ppb Level Carbon Monoxide Detection,  Journal of Micromechanics and Microengineering,  2023, DOI 10.1088/1361-6439/ace4d5. (IF: 2.4)

67. Bikash Pattnayak, Prince Rai, Hardik Kothadia, Ankur Gupta, Bubble Behaviour and Critical Heat Flux Investigations on Electrodeposited Metallic Tubes during Pool Boiling, Results in Surfaces and Interfaces, Volume 13, 1 October 2023, 100146. https://doi.org/10.1016/j.rsurfi.2023.100146. 

66. Vishwa Bhanu, Dariusz Fydrych, Shailesh M Pandey, Ankur Gupta, Chandan Pandey, Activated Tungsten Inert Gas Weld Characteristics of P91 Joint for Advanced Ultra Supercritical Power Plant Applications. J. of Materi Eng and Perform (2023). https://doi.org/10.1007/s11665-023-08814-4. (IF: 2.2)

2022

65. H. J. Biswal, T. Srivastava, V. Pandu Ranga, Ankur Gupta, “Facile fabrication of ZnO nanostructured Ni microtubes through pulse electrodeposition as promising photo catalyst for waste water remediation”, “Journal of Manufacturing Processes”, Volume 75, 2022, Pages 538-551, ISSN 1526-6125,  https://doi.org/10.1016/j.jmapro.2022.01.001. 2022. (IF: 6.1)

64. Vishwa Bhanu; Ankur Gupta; Chandan Pandey, “Investigation on joining P91 steel and Incoloy 800HT through gas tungsten arc welding for Advanced Ultra Super Critical (AUSC) power plants, Journal of Manufacturing Processes, 2022. (IF: 6.1)

63. Nipun Sharma, Vikas Pandey, Ankur Gupta, Swee Tiam Tan, Sudhiranjan Tripathy, and Mahesh Kumar, Recent progress on Group III-Nitride based Gas Sensors: A Review, Journal of Materials Chemistry C, 2022. (IF: 5.7)

62. Gulshan Verma, M Islam, Ankur Gupta, Real time monitoring of photocatalytic degradation of MB dye with ZnO-Ta nanocomposites on bio inspired PDMS tubes, chemical engineering journal advances, 2022. (IF: 5.5)

61. Vinay Kishnani, Shrishti Kumari, Ankur Gupta, Chemometric assisted Colorimetric based Inexpensive Paper Biosensor for Glucose Detection, Biosensors, 2022. (IF: 4.9)

60. Naresh Nagal, Shikhar Srivastava, Chandan Pandey, Ankur Gupta, Atul Kumar Sharma, Alleviation of Residual Vibrations in Hard-Magnetic Soft Actuators using a Command-Shaping Scheme”, Polymers 2022, 14, 3037. https://doi.org/10.3390/polym14153037. (IF: 4.9)

59. H. J. Biswal, Jaskaran Jot, Pandu Ranga, Ankur Gupta, Review on energy field assisted electrodeposition and electroforming process, CIRP Manufacturing Science and Technology, 2022. (IF: 4.6)

58. Vishwa Bhanu; Ankur Gupta; Chandan Pandey, “Dissimilar joining of the martensitic grade P91 and Incoloy 800HT alloy for AUSC boiler application: Microstructure, Mechanical Properties and Residual Stresses”, CIRP Journal of Manufacturing Science and Technology, 2022. (IF: 4.6)

57. Prince Rai, M. Islam, Ankur Gupta, “Review on Role of Microfluidic Device for Detection of Heavy Metals in Waste Water, Sensors and Actuators A: Physical, Volume 347, 1 November 2022, 113926. https://doi.org/10.1016/j.sna.2022.113926. (IF: 4.1)

56. Nipun Sharma, Sumit Kumar, Ankur Gupta, Swe Tiam Tan, Sudhiranjan Tripathy, and Mahesh Kumar, MoS2 Functionalized AlGaN/GaN Transistor based Room Temperature NO2 Gas Sensor, Sensors and Actuators A: Physical, 2022. (IF: 4.1)

55. Gulshan Verma, Prince Rai, M Islam, J. Korvink, Ankur Gupta, Integrated Electrochemical and Photocatalytic Degradation using ZnO Caterpillars Photocatalyst: Two-step Approach for Textile Industry based wastewater recovery, Materials Science & Engineering B, Volume 286, December 2022, 116078. https://doi.org/10.1016/j.mseb.2022.116078. (IF: 3.9)

54. Yu Ni, Ankur Gupta, Gulshan Verma, Sparsh Gupta, Peter G. Weidler, Dario Mager, Jan G. Korvink, Monsur Islam, “Preparation of electrospun porous alumina nanofibers for origami-inspired manufacturing”, Advanced Engineering Materials, 2022. https://doi.org/10.1002/adem.202201183. (IF: 3.4)

53. Raut, Prasad, Vinay Kishnani, Kunal Mondal, Ankur Gupta, and Sadhan C. Jana. 2022. “A Review on Gel Polymer Electrolytes for Dye-Sensitized Solar Cells” Micromachines 13, no. 5: 680. https://doi.org/10.3390/mi13050680. (IF: 3.0)

52. Nipun Sharma, Adarsh Nigam, Surani Dolmanan, Ankur Gupta, Sudhiranjan Tripathy, Mahesh Kumar, “1T and 2H Heterophase MoS2 for Enhanced sensitivity of GaN transistor based Mercury ion sensor, Nanotechnology, 2022. (IF: 2.9)

51. Gulshan Verma, Ankur Gupta, (2022). Recent development in carbon nanotubes based gas sensors. Journal of Materials NanoScience, 9(1), 3–13. Retrieved from https://pubs.thesciencein.org/journal/index.php/jmns/article/view/282.

50. Vishwa Bhanu, Ankur Gupta, C. Pandey, Role of A-TIG process in Joining of Martensitic and Austenitic Steels for Ultra-Supercritical Power Plants –A State of the Art Review, Nuclear Engineering and Technology, 2022. https://doi.org/10.1016/j.net.2022.03.003. (IF: 2.6)

49. Gulshan Verma, Ankur Gupta, Superhydrophobic ZnO-Au nanocomposite over PDMS tubes for enhanced photocatalytic degradation, applied nanoscience, 2022. https://doi.org/10.1007/s13204-022-02479-6

48. Gulshan Verma, Nikhil Sheshkar, C Pandey, Ankur Gupta, “Recent trends in the silicon elastomer and their sensing applications, Journal of Polymer Research, 2022. https://doi.org/10.1007/s10965-022-03044-z. (IF: 2.6)

47. Gulshan Verma, Ankur Gupta, “Room temperature operated MEMS gas sensor for ppb level detection of hydrogen teriliz: A review”, IoP Micromechanics and microengineering, 2022. DOI: 10.1088/1361-6439/ac82f8. (IF: 2.4)

46.  Prince Rai, Ankur Gupta, “Nanofunctionalized Pulse-electroformed Copper/graphene oxide tubular Composite for Efficient Textile Dye Degradation under visible light irradiation”, Applied Nanoscience, June 2022.  https://doi.org/10.1007/s13204-022-02612-5.

45. Kiran A, Ramavtar, Shivam Chaturvedi, Chandra Prakash, Ambesh Dixit, Deepak Fulwani, Ankur Gupta, Neha Jain, Vibhor Tak, and Ram Prakash, “Photocatalytic Oxidation Conveyor ‘PCOC’ System for Large Scale Surface Disinfection”, Review of Scientific Instruments, AIP, 2022. DOI: 10.1063/5.0082222. (IF: 1.5)

2021

44. N. Sharma, A. Nigam, D. Lobanov, Ankur Gupta, M. Kumar, Mercury (II) Ion Detection using AgNWs-MoS2 Nanocomposite on GaN HEMT for IoT Enabled Smart Water Quality Analysis. IEEE Internet of Things Journal. In press. Doi: 10.1109/JIOT.2021.3071382 (IF: 8.2)

43. S. Sirohi, Ankur Gupta, C. Pandey, R.S. Vidyarthy, K. Guruloth, H. Natu, Investigation of the microstructure and mechanical properties of the laser welded joint of P22 and P91 steel, Opt. Laser Technol. (2021). https://doi.org/10.1016/j.optlastec.2021.107610. (IF: 4.6)

42.  Kishnani V, Verma G, Pippara RK, Yadav A, Chauhan PS, Gupta A. Highly Sensitive, Ambient Temperature CO Sensor using Tin Oxide based Composites. Sensors and Actuators A: Physical. 2021 Sep 20:113111. (IF: 4.1)

41. H. J. Biswal, A. Yadav, P. Vundavilli and Ankur Gupta, High Aspect ZnO Nanorod Growth over Electrodeposited tube for Photocatalytic Dye Degradation of EtBr, RSC Advances, 2021, 11, 1623-1634. (IF: 3.9)

40. Bhanu, Vishwa, Dariusz Fydrych, Ankur Gupta, and Chandan Pandey. 2021. “Study on Microstructure and Mechanical Properties of Laser Welded Dissimilar Joint of P91 Steel and INCOLOY 800HT Nickel Alloy” Materials 14, no. 19: 5876. https://doi.org/10.3390/ma14195876. (IF: 3.1)

39. Anupam Sauraw, Atul Sharma, Dariusz Fydrych, Sachin Sirohi, Ankur Gupta, C. Pandey, Study on microstructural characterization, mechanical properties and residual stress of GTAW dissimilar joints of P91 and P22 steels, Materials, 2021. (IF: 3.1)

38. V. Kishnani, A. Yadav, K. Mondal, Ankur Gupta, “Palladium Functionalized Reduced Graphene Oxide for Hydrogen Sensing Performance: Theoretical Studies”, Energies 2021, 14, 5738. https://doi.org/10.3390/en14185738. (IF: 3.0)

37. V. Kishnani, S. Park, K. Mondal, U. Nakate, Ankur Gupta, “Nano-functionalized paper-based iot enabled devices for point-of-care testing: a review”, BioMed Micro Devices, 2021. Doi: 10.1007/s10544-021-00588-7. (IF: 3.0)

36. Kumar, Sarbesh, Sachin Sirohi, R. S. Vidyarthy, Ankur Gupta, and C. Pandey. “Role of the Ni-based filler composition on microstructure and mechanical teriliza of the dissimilar welded joint of P22 and P91 steel.” International Journal of Pressure Vessels and Piping (2021): 104473. (IF: 3.0)

35. R. K. Pippara, P. Chauhan, A. Yadav, V. Kishnani, Ankur Gupta, “Room Temperature Hydrogen Sensing with Polyaniline doped SnO2 Nanocomposites, Micro and Nano Engineering journal, 2021. (IF: 2.8)

34. Sheshkar N, Verma G, Pandey C, Sharma AK, Ankur Gupta. Enhanced thermal and mechanical properties of hydrophobic graphite-embedded polydimethylsiloxane composite. Journal of Polymer Research. 2021 Nov; 28 (11):1-1. (IF: 2.6)

33. H. J. Biswal, V. Pandu Ranga, Ankur Gupta, “Micro-tube Fabrication with Retrofit Electroforming System and Multi-objective Optimization with Evolutionary Algorithms”, Journal of Materials Engineering and Performance, 2021. (IF: 2.2)

32. G. Kumar, K. Mondal, Ankur Gupta, “Review on Si MEMS Resonant Sensors: A Perspective from Microfabrication”, Microelectronics journal, 2021. https://doi.org/10.1016/j.mejo.2021.105210. In Press. (IF: 2.2)

31. Sirohi S, Kumar S, Bhanu V, Pandey C, Ankur Gupta. Study on the Variation in Mechanical Properties along the Dissimilar Weldments of P22 and P91 Steel. Journal of Materials Engineering and Performance. 2021 Oct 12:1-6. (IF: 2.2)

30. J. G. Thakare; A. Gupta; P. K. Thraphdar; M. M. Mahapatra, C. Pandey, “Role of the heterogeneity in microstructure on the mechanical performance of the Autogenous Gas Tungsten Arc (GTA) welded dissimilar joint of F/M P91 and SS304L steel”, Fusion Engineering and Design, Volume 168, July 2021, 112616, 2021. https://doi.org/10.1016/j.fusengdes.2021.112616. (IF: 1.9)

29. S. Sirohi, C. Pandey, J. Thakare, P. Kumar, Ankur Gupta, “Characterization of the soft zone in dissimilar welds joint of 2.25Cr-1Mo and lean duplex LDX2101 steel”, Fusion Engineering and Design, volume 163, February 2021, 112147. https://doi.org/10.1016/j.fusengdes.2020.112147. (IF: 1.9)

28. Ankur Gupta, V. Patel, C. Pandey, “Functional Characterization of Nano porous silicate polymer for BSA immobilization, “Sensors International”, Volume 2, 2021, 100080.  https : // doi.org/10.1016/j.sintl.2021.100080. (IF: 10.21)

27. S. Jena, Ankur Gupta, “Review on Pressure Sensors: A Perspective from Mechanical to Micro-Electro-Mechanical Systems”, Sensor Review, 2021. https://doi.org/10.1108/SR-03-2021-0106. (IF: 1.6)

26. H. Biswal, P. Rout, Ankur Gupta, “Laser assisted Micro-hole Fabrication in Flexible Substrate”, in Lasers in Engineering (Old City Publishing), 2021, Vol. 49 Issue 1-3, p3-20. 18p. (IF: 0.5)

2020

25. H. J. Biswal, Pandu R. Vundavilli, Ankur Gupta, “Electrodeposition of Graphene Reinforced Metal Matrix Composites for Enhanced Mechanical and Physical Properties: A Review, Journal of Electrochemical Society, 2020. https://doi.org/10.1149/1945-7111/abbf29. (IF: 3.2)

24. V. Patel, Ankur Gupta, “Facile synthesis of  CuO nano bricks for high combustion characteristics with nanoaluminum and catalytic thermal decomposition of lithium perchlorate”, Particulate Science and Technology, 2020. https://doi.org/10.1080/02726351.2020.1822482. (IF: 2.5)

23. P. Pal, A. Yadav, P.S. Chauhan, P.K. Parida, Ankur Gupta, Reduced Graphene Oxide based Hybrid Functionalized Films for Hydrogen Detection: Theoretical and Experimental Studies, Sensors International, 2020,  https://doi.org/10.1016/j.sintl.2020.100072.

Before 2019

22. P. Chauhan, R. Kant, Ankur Gupta, S. Bhattacharya, “Facile synthesis of ZnO/GO nanoflowers over Si substrate for improved photocatalytic decolorization of MB dye and industrial wastewater under solar irradiation”, Materials Science in Semiconductor Processing, 2019. DOI: 10.1016/j.mssp.2018.08.022. (IF: 4.2)

21. Mondal, K., B Balasubramaniam, Ankur Gupta, A Lahcen, M Kwiatkowski, Carbon Nanostructures for Energy and Sensing Applications, Journal of Nanotechnology, vol. 2019, Article ID 1454327, 3 pages, 2019. https://doi.org/10.1155/2019/1454327. (IF: 3.9)

20. Ankur Gupta, K. Manoharan, R. Kant, S. Bhattacharya, “Nano-finishing of MEMS based platform for enhanced optical sensing, Journal of Micro Manufacturing, 2019. In press. DOI: 10.1177/2516598419862676.  (IF: 1.3)

19. R. Kant, G. Bhatt, A. Ganguli, V. Patel, K. M., Ankur Gupta, K. G., S. Gangopadhyay, R. Gurunath, S. Bhattacharya, “Synchronized Electro-Mechanical Shock Wave Induced Bacterial Transformation”, ACS Omega, 2019. https://doi.org/10.1021/acsomega.9b00202. (IF: 4.1)

18. Ankur Gupta, G. Bhatt, S. Bhattacharya, “Novel Dipstick model for Portable Bio-sensing Application, Journal of Energy, Environmental Sustainability, vol. 7, 2019, 36-41. (In press).

17. B. Nahak, Ankur Gupta, “A Review on Optimization of Machining Performances and recent developments in Electro Discharge Machining”, Manufacturing Review, 2019. https://doi.org/10.1051/mfreview/2018015. (IF: 1.9)

16. Ankur Gupta, S. B, “On the growth mechanism of ZnO nano structure via aqueous chemical synthesis”, Applied Nanoscience, 2018, Vol.8, Issue3, pp 499–509.   Doi: https://doi.org/10.1007/s13204-018-0782-0

15. P. K. Behera, Ankur Gupta, “Novel design of stair climbing wheel chair mechanism”, Journal of Mechanical Science and technology, Springer, 2018. DOI: https://doi.org/10.1007/s12206-018-0938-6. (IF: 1.5)

14. P. Chauhan, A. Rai, Ankur Gupta, S. Bhattacharya, “Enhanced photocatalytic performance of vertically grown nanorods decorated with metals (Al, Ag, Au, and Au–Pd) for degradation of industrial dye”, Material Research Express, 2017. https://doi.org/10.1088/2053-1591/aa6d31. (IF: 1.8)

13. Ankur Gupta, S. Gangopadhyay, K. Gangopadhyay, S.  Bhattacharya, “Palladium functionalized nano structured platforms for hydrogen sensing”, Nanomaterials and Nanotechnology, 2016, 6:0 | doi: 10.5772/63987 (IF: 3.1)

12. S. Yardi, Ankur Gupta, D. Boolchandani, S. Bhattacharya, “High Efficiency Coupling of Optical Fibres with SU8 Micro-droplet Using Laser Welding Process”, Lasers in Manufacturing and Material Processing, 2016. Doi: 10.1007/s40516-016-0027-6.

11. Ankur Gupta, K. Mondal, A. Sharma, S. Bhattacharya, “Superhydrophobic Polymethylsilisesquoxane pinned one dimensional ZnO nanostructures for water remediation through photo-catalysis”, RSC Advances, 2015, 5, 45897-45907. (IF: 3.9)

10. Ankur Gupta, J. R. Saurav, S. Bhattacharya, “Solar light based degradation of organic pollutants using ZnO nano brushes for waste water treatment”, RSC Advances, 2015, 5, 71472 – 71481. (IF: 3.9)

9. R. K. Singh, S. Singh, E. Suresh, R. Kant, Ankur Gupta, S. B., “A novel solenoidal micro-valve for embedded micro-fluidic applications”, Microfluidics and Nanofluidics, 2015, doi 10.1007/s10404-015-1543-y. (IF: 2.3)

8. Ankur Gupta, D. Singh, P. Raj, H. Gupta, S. Verma, S. Bhattacharya, “Antimicrobial investigation of ZnO-HAP nanocomposites for biomedical applications”, Journal of Bionanoscience, 2015, 9, no. 3, 2015, 190-196. (IF: 3.0)

7.  Ankur Gupta, V. K. Patel, D. Singh, R. Kant, S. Bhattacharya, “Surface Functionalization to Mitigate fouling of Biodevices”, Review on Adhesions and Adhesives (RAA), vol. 3, issue-3, 2015.

6. Ankur Gupta, S. Pandey, M. Nayak, A. Maity, S. Majumder, S. Bhattacharya, “Hydrogen sensing based on nanoporous silica embedded ultra dense ZnO nanobundles”, RSC Advances, 4.15, 2014, 7476-7482. (IF: 3.9)

5. Ankur Gupta*, A. Srivastava*, C. J. Mathai, S. Gangopadhyay, S.  Bhattacharya, “Nano porous palladium sensor for sensitive and rapid detection of hydrogen”,  Sensor letters, 12, 1279-1285, 2014.

4. A. Atwe, Ankur Gupta, R. Kant, M. Das, I. Sharma, S.  Bhattacharya, “A Novel Microfluidic switch for pH control using Chitosan based Hydrogels”, Microsystem  Technologies, 2014,  doi10.1007/s00542-014-2112-0. (IF: 1.6)

3. R. K. Singh, A. Kumar, R. Kant, Ankur Gupta,  E. Suresh, Shantanu  Bhattacharya, “Design and fabrication of 3-dimensional helical structures in polydimethylsiloxane for flow control applications”, Microsystem Technologies, 2014, Volume 20, Issue 1, pp 101–111. (IF: 1.6)

2. M. Nayak, D. Singh, H. Singh, R. Kant, Ankur Gupta, S. Mandal, R. Gurunath, S. Bhattacharya “Integrated, Sorting, Concentration and real time PCR based detection system for isolation and sensitive detection of microorganisms”, Scientific Report, 2013. Doi:10.1038/srep03266. (IF: 3.8)

1. A. Kumar, Ankur  Gupta, R. Kant, S. Nadeem, J. Ramkumar, S. Bhattacharya, “Optimization of LASER machining process for the preparation of photo masks and its application to Micro-systems fabrication”, Journal of Micro/nano lithography (JMoEMS), 2013. Doi:10.1117/1.JMM.13.1.019801.

1. Ankur Gupta, et al., "Hydrogen sensing based on nanoporous silica-embedded ultra dense ZnO nanobundles." RSC Advances 4.15 (2014): 7476-7482. https://doi.org/10.1039/C3RA45316B  Link

2. Ankur Gupta, et al., "Superhydrophobic Polymethylsilisesquoxane pinned one dimensional ZnO nanostructures for water remediation through photo-catalysis”, RSC Advances, 2015, 5, 45897-45907. https://doi.org/10.1039/C5RA02938D Link

3. Ankur Gupta, et al. "Investigation of ZnO-hydroxyapatite nanocomposite incorporated in restorative glass ionomer cement to enhance its mechanical and antimicrobial properties." Journal of Bionanoscience 9.3 (2015): 190-196. https://doi.org/10.1166/jbns.2015.1299 Link 

4. Ankur Gupta, et al.,"Solar light based degradation of organic pollutants using  ZnO nanobrushes for waste water treatment", RSC Advances, 2015, 5, 71472 - 71481. https://doi.org/10.1039/C5RA10456D Link

5. Ankur Gupta, et al. “Nano porous palladium sensor for sensitive and rapid detection of hydrogen”,  Sensor letters, 12, 1279-1285, 2014. https://doi.org/10.1166/sl.2014.3307 Link

6. Ankur Gupta, et al., “Palladium functionalized nano structured platforms for hydrogen sensing”, Nanomaterials and Nanotechnology, 2016, 6:0. https://doi.org/10.5772%2F63987 Link

7.  Ankur Gupta, et al., "Surface Functionalization to Mitigate fouling of Biodevices", Review on Adhesions and Adhesives (RAA), vol. 3, issue-3, 2015. https://doi.org/10.7569/RAA.2015.097309 Link

8.  A. Kumar, Ankur  Gupta, et al., “Optimization of LASER machining process for the preparation of photo masks and its application to Micro-systems fabrication”, Journal of Micro/nano lithography (JMoEMS), 2013.https://doi.org/10.1117/1.JMM.12.4.041203 Link

9.  Ankur Gupta, et al., “Integrated, Sorting, Concentration and real time PCR based detection system for isolation and sensitive detection of microorganisms”, Nature Scientific Reports, 2013. doi:10.1038/srep03266. Link

10.  A. Atwe, Ankur Gupta, R. Kant, M. Das, I. Sharma, S. Bhattacharya, “A Novel Microfluidic switch for pH control using Chitosan based Hydrogels”, Microsystem  Technologies, 2014,  doi10.1007/s00542-014-2112-0. DOI 10.1007/s00542-014-2112-0 Link

11.  R. Singh, A. Kumar, R. Kant, Ankur Gupta, E. Suresh, and S. Bhattacharya. "Design and fabrication of 3-dimensional helical structures in polydimethylsiloxane for flow control applications." Microsystem technologies 20, no. 1 (2014): 101-111. DOI 10.1007/s00542-013-1738-7 Link 

12.  R. K. Singh, S. Singh, E. Suresh, R. Kant, Ankur Gupta, S. Bhattacharya, “A novel solenoidal micro-valve for embedded micro-fluidic applications”, Microfluidics and Nanofluidics, 2015, doi 10.1007/s10404-015-1543-y. Link

13.  S. Yardi, Ankur Gupta, D. Boolchandani, S. Bhattacharya, “Novel process of joining Optical fibres with patterned SU8 waveguides using laser welding”, Lasers in Manufacturing and Material Processing, 2016. doi: 10.1007/s40516-016-0027-6. Link

14. P. Chauhan, A. Rai, Ankur Gupta, S. Bhattacharya, "Enhanced photocatalytic performance of vertically grown nanorods decorated with metals (Al, Ag, Au, and Au–Pd) for degradation of industrial dye", Material Research Express, 2017. https://doi.org/10.1088/2053-1591/aa6d31 Link

15. P. K. Behera, Ankur Gupta, "Novel design of stair climbing wheel chair mechanism", Journal of Mechanical Science and technology, Elsevier, 2018. https://doi.org/10.1007/s12206-018-0938-6 Link

16. Ankur Gupta, S. Bhattacharya, "On the growth mechanism of ZnO nano structure via aqueous chemical synthesis ", Applied Nanoscience, 2018, Volume 8, Issue 3, pp 499–509. https://doi.org/10.1007/s13204-018-0782-0 Link

17.  P. Chauhan, R. Kant, Ankur Gupta, S. Bhattacharya, "Facile synthesis of ZnO/GO nanoflowers over Si substrate for improved photocatalytic decolorization of MB dye and industrial wastewater under solar irradiation", Materials Science in Semiconductor Processing, 2018. https://doi.org/10.1016/j.mssp.2018.08.022 Link

18. B. Nahak, Ankur Gupta, "A Review on Optimization of Machining Performances and recent developments in Electro Discharge Machining", Manufacturing Review, 2019. https://doi.org/10.1051/mfreview/2018015 Link

19. Ankur Gupta, et al., "Novel dipstick model for biosensing application, Journal of energy, environmental sustainability, 2019. Link

20. R. Kant, G. Bhatt, A. Ganguli, V. Patel, D. Singh, M. Nayak, K. Mishra, Ankur Gupta, K. Gangopadhyay, S. Gangopadhyay, R. Gurunath, S. Bhattacharya, "Synchronized Electro-Mechanical Shock Wave Induced Bacterial Transformation", in ACS Omega, 2019. https://doi.org/10.1021/acsomega.9b00202 Link

21. Ankur Gupta, et al., "Nano-finishing of MEMS based platform for enhanced optical sensing, Journal of Micromanufacturing, 2020. https://doi.org/10.1177%2F2516598419862676 Link

22. K. Mondal, B Balasubramaniam, Ankur Gupta, A Lahcen, M Kwiatkowski, Carbon Nanostructures for Energy and Sensing Applications, Journal of Nanotechnology, vol. 2019, Article ID 1454327, 3 pages, 2019. https://doi.org/10.1155/2019/1454327 Link

23. V. Patel, Ankur Gupta, “Facile synthesis of  CuO nano bricks for high combustion characteristics with nanoaluminum and catalytic thermal decomposition of lithium perchlorate”, Particulate Science and Technology, pp 1-7, 2020. https://doi.org/10.1080/02726351.2020.1822482 Link

24. H. Biswal, P. Vundavilli, Ankur Gupta*, "Electrodeposition of Graphene Reinforced Metal Matrix Composites for Enhanced Mechanical and Physical Properties: A Review, Journal of Electrochemical Society, 2020. (Impact factor: 3.7). https://doi.org/10.1149/1945-7111/abbf29 Link

25. P. Pal, P. Chauhan, A. Yadav, Ankur Gupta*, “Reduced Graphene Oxide based Hybrid Functionalized Films for Hydrogen Sensing: a DFT and Experimental Study”, Sensors International,  2021. https://doi.org/10.1016/j.sintl.2020.100072 Link

26. S. Sirohi, C. Pandey, J. Thakare, P. Kumar, Ankur Gupta, “Characterization of the soft zone in dissimilar welds joint of 2.25Cr-1Mo and lean duplex LDX2101 steel”, Fusion Engineering and Design, volume 163, February 2021, 112147. https://doi.org/10.1016/j.fusengdes.2020.112147 Link

27.H. J. Biswal, A. Yadav, P. Vundavilli and Ankur Gupta*, High Aspect ZnO Nanorod Growth over Electrodeposited tube for Photocatalytic Dye Degradation of EtBr, RSC Advances, 2021. https://doi.org/10.1039/D0RA08124H Link 

28. J. G. Thakare; Ankur Gupta; et al.,  “Role of the heterogeneity in microstructure on the mechanical performance of the Autogenous Gas Tungsten Arc (GTA) welded dissimilar joint of F/M P91 and SS304L steel”, Fusion Engineering and Design, 2021. 

29.  Ankur Gupta*, et al., “Functional Characterization of Nano porous silicate polymer for BSA immobilization, “Sensors International”, Volume 2, 2021, 100080. https://doi.org/10.1016/j.sintl.2021.100080 Link

30.  N. Sharma, A. Nigam, D. Lobanov, Ankur Gupta, M. Kumar, “Real Time Monitoring of Mercury Ions using Ag NW- MoS2 Nanocomposites on AlGaN/GaN HEMT and Proposed IoT Smart Water Quality Analysis”, IEEE IoT,  2021. https://doi.org/10.1109/JIOT.2021.3071382 Link 

31. R. Pippara, P. Chauhan, A. Yadav, V. Kishnani, Ankur Gupta*, Room temperature Hydrogen sensing with PANI/SnO2/Pd, Micro and Nano Engineering, Elsevier, 2021. Link 

32. Kumar, Sarbesh, Sachin Sirohi, R. S. Vidyarthy, Ankur Gupta, and C. Pandey. "Role of the Ni-based filler composition on microstructure and mechanical behavior of the dissimilar welded joint of P22 and P91 steel." International Journal of Pressure Vessels and Piping (2021): 104473.https://doi.org/10.1016/j.ijpvp.2021.104473 

33. S. Jena, Ankur Gupta*, Review on Pressure Sensors: A Perspective from Mechanical to Micro-Electro-Mechanical Systems, Sensors Review, 2021. Link 

34.  H. J. Biswal, V. Panduranga, Ankur Gupta*, "Fabrication and characterization of nickel micro-tubes through electroforming: deposition optimization using evolutionary algorithms", Journal of Materials Engineering and Performance, 2021. DOI:10.1007/s11665-021-06223-z. Link

35.  G. Kumar, K. Mondal, Ankur Gupta*, “Review on Si MEMS Resonant Sensors: A Perspective from Microfabrication”, Microelectronics journal, 2021. https://doi.org/10.1016/j.mejo.2021.105210. 

36.  Kishnani V, Verma G, Pippara RK, Yadav A, Chauhan PS, Gupta A*. Highly Sensitive, Ambient Temperature CO Sensor using Tin Oxide based Composites. Sensors and Actuators A: Physical. 2021 Sep 20:113111.

37.  V. Kishnani, A. Yadav, K. Mondal, Ankur Gupta*, “Palladium Functionalized Reduced Graphene Oxide for Hydrogen Sensing Performance: Theoretical Studies”, Energies 2021, 14, 5738. https://doi.org/10.3390/en14185738. 

38.  V. Kishnani, S. Park, K. Mondal, U. Nakate, Ankur Gupta*, “Nano-functionalized paper-based iot enabled devices for point-of-care testing: a review”, BioMed Micro Devices, 2021. Doi: 10.1007/s10544-021-00588-7 Link 

39.  Sheshkar N, Verma G, Pandey C, Sharma AK, Ankur Gupta*. Enhanced thermal and mechanical properties of hydrophobic graphite-embedded polydimethylsiloxane composite. Journal of Polymer Research. 2021 Nov;28(11):1-1.

40.  Sirohi S, Kumar S, Bhanu V, Pandey C, Ankur Gupta. Study on the Variation in Mechanical Properties along the Dissimilar Weldments of P22 and P91 Steel. Journal of Materials Engineering and Performance. 2021 Oct 12:1-6. Link

41.  Bhanu, Vishwa, Dariusz Fydrych, Ankur Gupta, and Chandan Pandey. 2021. "Study on Microstructure and Mechanical Properties of Laser Welded Dissimilar Joint of P91 Steel and INCOLOY 800HT Nickel Alloy" Materials 14, no. 19: 5876. https://doi.org/10.3390/ma14195876  

42.  S. Sirohi, Ankur Gupta, C. Pandey, R.S. Vidyarthy, K. Guruloth, H. Natu, Investigation of the microstructure and mechanical properties of the laser welded joint of P22 and P91 steel, Opt. Laser Technol. (2021). https://doi.org/10.1016/j.optlastec.2021.107610.

43. Anupam Sauraw, Atul Sharma, Dariusz Fydrych, Sachin Sirohi, Ankur Gupta, C. Pandey, Study on microstructural characterization, mechanical properties and residual stress of GTAW dissimilar joints of P91 and P22 steels, Materials, 2021.

44.   H. J. Biswal, T. Srivastava, V. Pandu Ranga, Ankur Gupta*, “Facile fabrication of ZnO nanostructured Ni microtubes through pulse electrodeposition as promising photo catalyst for waste water remediation”, “Journal of Manufacturing Processes”, Volume 75, 2022, Pages 538-551, ISSN 1526-6125,  https://doi.org/10.1016/j.jmapro.2022.01.001. 2022 

45.  Gulshan Verma, Ankur Gupta*, (2022). Recent development in carbon nanotubes based gas sensors. Journal of Materials NanoScience, 9(1), 3–13. Retrieved from https://pubs.thesciencein.org/journal/index.php/jmns/article/view/282.

46.  Vishwa Bhanu, Ankur Gupta, C. Pandey, Role of A-TIG process in Joining of Martensitic and Austenitic Steels for Ultra-Supercritical Power Plants -A State of the Art Review, Nuclear Engineering and Technology, 2022. https://doi.org/10.1016/j.net.2022.03.003. 

47.  Nipun Sharma, Adarsh Nigam, Surani Dolmanan, Ankur Gupta, Sudhiranjan Tripathy, Mahesh Kumar, “1T and 2H Heterophase MoS2 for Enhanced sensitivity of GaN transistor based Mercury ion sensor, Nanotechnology, 2022. Link

48. Gulshan Verma, Ankur Gupta*, Superhydrophobic ZnO-Au nanocomposite over PDMS tubes for enhanced photocatalytic degradation, applied nanoscience, 2022.  https://doi.org/10.1007/s13204-022-02479-6. Link

49.  Gulshan Verma, Nikhil Sheshkar, C Pandey, Ankur Gupta*, “Recent trends in the silicon elastomer and their sensing applications, Journal of Polymer Research, 2022. https://doi.org/10.1007/s10965-022-03044-z . Link 

50.  Raut, Prasad, Vinay Kishnani, Kunal Mondal, Ankur Gupta*, and Sadhan C. Jana. 2022. "A Review on Gel Polymer Electrolytes for Dye-Sensitized Solar Cells" Micromachines 13, no. 5: 680. https://doi.org/10.3390/mi13050680.  

51. H. J. Biswal, Jaskaran Jot, Pandu Ranga, Ankur Gupta*, Review on energy field assisted electrodeposition and electroforming process, CIRP Manufacturing Science and Technology, 2022. Link

52. Nipun Sharma, Sumit Kumar, Ankur Gupta, Swe Tiam Tan, Sudhiranjan Tripathy, and Mahesh Kumar, MoS2 Functionalized AlGaN/GaN Transistor based Room Temperature NO2 Gas Sensor, Sensors and Actuators A: Physical, 2022. Link

53. Vishwa Bhanu; Ankur Gupta; Chandan Pandey, “Dissimilar joining of the martensitic grade P91 and Incoloy 800HT alloy for AUSC boiler application: Microstructure, Mechanical Properties and Residual Stresses”, CIRP Journal of Manufacturing Science and Technology, 2022. Link

54.  Vishwa Bhanu; Ankur Gupta; Chandan Pandey, “Investigation on joining P91 steel and Incoloy 800HT through gas tungsten arc welding for Advanced Ultra Super Critical (AUSC) power plants, Journal of Manufacturing Processes, 2022. Link

55.  Vishwa Bhanu and Shailesh M. Pandey and Ankur Gupta and Chandan Pandey, “Dissimilar weldments of P91 and Incoloy 800HT: Microstructure, mechanical properties, and residual stresses, International Journal of Pressure Vessels and Piping Volume 199, October 2022, 104782. Link

56.  Kiran A, Ramavtar, Shivam Chaturvedi, Chandra Prakash, Ambesh Dixit, Deepak Fulwani, Ankur Gupta, Neha Jain, Vibhor Tak, and Ram Prakash, "Photocatalytic Oxidation Conveyor ‘PCOC’ System for Large Scale Surface Disinfection", Review of Scientific Instruments, AIP, 2022. DOI: 10.1063/5.0082222. Link

57. Gulshan Verma, Ankur Gupta*, “Room temperature operated MEMS gas sensor for ppb level detection of hydrogen sulfide: A review”, IoP Micromechanics and microengineering, 2022. DOI: 10.1088/1361-6439/ac82f8 Link

58.  Naresh Nagal, Shikhar Srivastava, Chandan Pandey, Ankur Gupta, Atul Kumar Sharma, “Alleviation of Residual Vibrations in Hard-Magnetic Soft Actuators using a Command-Shaping Scheme”, Polymers 2022, 14, 3037. https://doi.org/10.3390/polym14153037.

59.  Nipun Sharma, Vikas Pandey, Ankur Gupta, Swee Tiam Tan, Sudhiranjan Tripathy, and Mahesh Kumar, Recent progress on Group III-Nitride based Gas Sensors: A Review, Journal of Materials Chemistry C, 2022. (Impact factor 8.0) Link

60.  Prince Rai, Ankur Gupta*, “Nanofunctionalized Pulse-electroformed Copper/graphene oxide tubular Composite for Efficient Textile Dye Degradation under visible light irradiation”, Applied Nanoscience, August 2022.  https://doi.org/10.1007/s13204-022-02612-5.  link.

61.  Prince Rai, M. Islam,  Ankur Gupta*, “Microfluidic Devices for the Detection of Contamination in Water Samples: A Review”, Sensors and Actuators A: Physical, October 2022.  https://doi.org/10.1016/j.sna.2022.113926.  link.

62.  Yu Ni, Ankur Gupta, Gulshan Verma, Sparsh Gupta, Peter G. Weidler,Dario Mager, Jan G. Korvink, Monsur Islam, “Preparation of electrospun porous alumina nanofibers for origami-inspired manufacturing”, Advanced Engineering Materials (Wiley), 2022. https://doi.org/10.1002/adem.202201183.  link.

63.  Gulshan Verma, Prince Rai, M Islam, J. Korvink, Ankur Gupta*, Integrated Electrochemical and Photocatalytic Degradation using ZnO Caterpillars Photocatalyst: Two-step Approach for Textile Industry based wastewater recovery, Materials Science & Engineering B, Volume 286, December 2022, 116078. Link

64.  Vinay Kishnani, Shrishti Kumari, Ankur Gupta*, Chemometric assisted Colorimetric based Inexpensive Paper Biosensor for Glucose Detection, Biosensors (Impact factor: 5.74), 2022.

65.  Gulshan Verma, M Islam, Ankur Gupta*, Real time monitoring of photocatalytic degradation of MB dye with ZnO-Ta nanocomposites on bio inspired PDMS tubes, chemical engineering journal advances, 2022. 

66. Prince Kumar Rai, Ankur Gupta*, Development of durable anticorrosion superhydrophobic electroformed copper tubular structures, Journal of Manufacturing Processes,  Volume 85, 6 January 2023, Pages 236-245. Link

67. Prince Kumar Rai, Vishav Kant, Rakesh Kumar Sharma,  Ankur Gupta*, Process optimization for textile industry-based wastewater treatment via ultrasonic-assisted electrochemical processing, Engineering Applications of Artificial Intelligence, Volume 122, 2023, 106162. Link

68. Shrishti Kumari, Monsur Islam, Ankur Gupta*, Paper-based Multiplex Biosensors for Inexpensive Healthcare Diagnostics: A Comprehensive Review, Biomedical Microdevices, 25, 17 (2023). https://doi.org/10.1007/s10544-023-00656-0. Link

69. Hrudaya Jyoti Biswal, Pandu R. Vundavilli, Kunal Mondal, Nagaraj P. Shetti, Ankur Gupta*, ZnO/CuO nanostructures anchored over Ni/Cu tubular films via pulse electrodeposition for photocatalytic and antibacterial applications, Materials Science for Energy Technologies, Volume 6, 2023, Pages 237-251. Link

70. Nipun Sharma, Mahesh Kumar, S. Tripathy, Ankur Gupta et al., "Ultrasensitive real time detection of Pb2+ ions using g-C3N4 nanosheets", IEEE Sensors Journal, 2023. 10.1109/JSEN.2023.3264969. Link

71. Gulshan Verma, Saloni Singhal, Prince Kumar Rai, Ankur Gupta*, "Simple Approach to Develop Paper Based Biosensor for Realtime Uric Acid Detection", Analytical Methods, 2023. DOI: 10.1039/D3AY00613A. Link

72. Bhanu, Vishwa, Aniruddha Malakar, Ankur Gupta, and C. Pandey. "Electron beam welding of P91 steel and incoloy 800HT and their microstructural studies for advanced ultra super critical (AUSC) power plants." International Journal of Pressure Vessels and Piping (2023): 105010.

73. Verma, Gulshan; Gokarna, Anisha; Kadiri, Hind; Nomenyo, Komla; Lerondel, Gilles; Ankur Gupta*, Multiplexed Gas Sensor: Fabrication strategies, Recent Progress, and Challenges , ACS Sensors, 2023.  https://doi.org/10.1021/acssensors.3c01244 (Impact Factor: 9.6)

74. Vinay Kishnani, Ankur Gupta*, Predictive framework development for user-friendly on-site glucose detection , ACS Applied biomaterials 2023. https://doi.org/10.1021/acsabm.3c00532. Link

75.  Bikas Pattnayak, Prince Rai, H. Kothadia, Ankur Gupta*,  Bubble Behaviour and Critical Heat Flux Investigations on Electrodeposited Metallic Tubes during Pool Boiling, Journal Results in Surface and Interfaces, 2023.

76.  Vishwa Bhanu, C. Pandey, Ankur Gupta,  "Activated-TIG Weld Characteristics of P91 Joint for Advanced Ultra Super critical (AUSC) Power Plant Applications", Journal of Materials Engineering and Performance, 2023.

77.  Gulshan Verma, Vikas Pandey, Monsur Islam, Mahesh Kumar, Ankur Gupta*,  Room temperature operated flexible La-ZnO/MWCNTs sensor for ppb level carbon monoxide detection, Journal of Micromechanics and Microengineering 33 (9), 095003, 2023. link

78.  Gulshan Verma, Monsur Islam, Ankur Gupta*,  TiS2 Nanoparticle-Anchored Candle-Soot Decorated Carbon Nanofiber-Based Hydrophobic/Oleophobic Membrane for Oil/Water Separation, ACS ES&T Water 2023. https://doi.org/10.1021/acsestwater.3c00445. Link 

79.  Prince Kumar Rai, Ankur Gupta*,  Development of Pulse-electroformed Cu/SiC Composite Tubes with Enhanced Mechanical and Anti-Corrosion Properties, Archives in Civil and Mechanical Engineering, 2023.  doi: 10.1007/s43452-023-00830-4. 

80.  Gulshan Verma, Saloni Singhal, Ankur Gupta*, Nature Inspired Ficus Religiosa Leaf Mesh Coated with Antibacterial ZnO/PANi@PMMA Nanocomposite for Separation and Water Purification, Catalysis Communications, 2023.

81.  Prince Rai, Ankur Gupta*, Review—Electroforming Process for Microsystems Fabrication, Journal of electrochemical Society, 2023. DOI 10.1149/1945-7111/ad0d16. Link

82.  Gulshan Verma, Kunal Mondal, Monsur Islam, and Ankur Gupta, Recent Advances in Advanced Micro and Nanomanufacturing for Wastewater Purification, ACS Appl. Eng. Mater. 2024, https://doi.org/10.1021/acsaenm.3c00711. Link

83.  Kaur, S; Verma, G; Dolle, S; Azmi, R; Heissler, S; Eggeler, Y. M; Mondal, K; Mager, D; Gupta, A; Islam, M; Jan G. Korvink "Enhanced Performance of Laser-Induced Graphene Supercapacitors via Integration with Candle-Soot Nanoparticles", Carbon, 2024.

84.  Zafar, Usama, Prince Kumar Rai, Ankur Gupta, Jan G. Korvink, Vlad Badilita, and Monsur Islam. 2024. "Laser-Induced Copper/Carbon Nanocomposite from Anodically Electrodeposited Chitosan for H2O2 Sensing" C 10, no. 2: 28. Link https://doi.org/10.3390/c10020028. 

85. Rai, P. K., Singh, A., Bishwanathan, S., Gupta, P. K., Wang, D. Y., Islam, M., & Gupta, A. (2024). Bi-metallic Electrochemical Deposition on 3D pyrolytic carbon architectures for potential application in hydrogen evolution reaction. Science and Technology of Advanced Materials. https://doi.org/10.1080/14686996.2024.2421740. 

“A process for the production of high surface area nano metal oxides” Patent application no. 472/DEL/2014. Link 

• S. Bhattacharya, Ankur Gupta, A. B. Gupta, A. Pandey (Ed.), "Water Remediation" published by Springer, 2017. Link

• Ankur Gupta (Lead Editor), M. Kumar, R. Singh, S. Bhattacharya (Ed.), "Gas Sensors: Manufacturing, Materials, and Technologies" to be published on November 2022  by CRC Press. Link

• Ankur Gupta, G. Verma, "Nanostructured Gas Sensors: Fundamentals, Devices, and Applications", by Jenny Stanford publishing, Jan 2023. Link

1. R. Kant, Ankur Gupta, S. Bhattacharya, "Studies on CO2 Laser Micromachining on PMMA to Fabricate Micro Channel for Microfluidic Applications." In Lasers Based Manufacturing, pp. 221-238. Springer India, 2015.https://doi.org/10.1177%2F2516598419862676 Link

2. Ankur Gupta, V. K. Patel, D. Singh, Shantanu Bhattacharya, "Surface modification Strategies for fabrication of nanobiodevices",  Progress in Adhesions and Adhesives, Wiley Online, 2017. https://doi.org/10.1002/9781119407485.ch7 Link 

3. Gupta A., Pal P. (2018) Flexible Sensors for Biomedical Application. In: Bhattacharya S., Agarwal A., Chanda N., Pandey A., Sen A. (eds) Environmental, Chemical and Medical Sensors. Energy, Environment, and Sustainability. Springer, Singapore. https://doi.org/10.1007/978-981-10-7751-7_13. Link.  

4. Gupta A., Mondal K., Kumar S. (2018) Role of Photo-catalysis in Water Remediation. In: Bhattacharya S., Gupta A., Gupta A., Pandey A. (eds) Water Remediation. Energy, Environment, and Sustainability. Springer, Singapore. https://doi.org/10.1007/978-981-10-7551-3_7  Link 

5.  Mondal K., Gupta A. (2018) Recent Advances in Carbon–Semiconductor Nanocomposites for Water Remediation. In: Bhattacharya S., Gupta A., Gupta A., Pandey A. (eds) Water Remediation. Energy, Environment, and Sustainability. Springer, Singapore. https://doi.org/10.1007/978-981-10-7551-3_4 Link 

6. Bhattacharya S., Gupta A.B., Gupta A., Pandey A. (2018) Introduction to Water Remediation: Importance and Methods. In: Bhattacharya S., Gupta A., Gupta A., Pandey A. (eds) Water Remediation. Energy, Environment, and Sustainability. Springer, Singapore. https://doi.org/10.1007/978-981-10-7551-3_1 Link 

7. Gupta, A., & Pal, P. (2019). Micro-electro-mechanical system–based drug delivery devices. In Bioelectronics and Medical Devices (pp. 183-210). Woodhead Publishing. https://doi.org/10.1016/B978-0-08-102420-1.00010-8. Link 

8. Jena S., Gupta A. (2019) Nano-energetic Materials for Defense Application. In: Bhattacharya S., Agarwal A., Rajagopalan T., Patel V. (eds) Nano-Energetic Materials. Energy, Environment, and Sustainability. Springer, Singapore. https://doi.org/10.1007/978-981-13-3269-2_4   Link 

9. Gupta A., Parida P.K., Pal P. (2019) Functional Films for Gas Sensing Applications: A Review. In: Bhattacharya S., Agarwal A., Prakash O., Singh S. (eds) Sensors for Automotive and Aerospace Applications. Energy, Environment, and Sustainability. Springer, Singapore. https://doi.org/10.1007/978-981-13-3290-6_2   Link 

10. Jena S., Gupta A. (2019) Embedded Sensors for Health Monitoring of an Aircraft. In: Bhattacharya S., Agarwal A., Prakash O., Singh S. (eds) Sensors for Automotive and Aerospace Applications. Energy, Environment, and Sustainability. Springer, Singapore. https://doi.org/10.1007/978-981-13-3290-6_5   Link 

11.  Jena S., Gupta A., Pippara R.K., Pal P., Adit (2019) Wireless Sensing Systems: A Review. In: Bhattacharya S., Agarwal A., Prakash O., Singh S. (eds) Sensors for Automotive and Aerospace Applications. Energy, Environment, and Sustainability. Springer, Singapore. https://doi.org/10.1007/978-981-13-3290-6_9 . Link 

12. A. Yadav, K. Mondal, Ankur Gupta, Biomedical application of ZnO nanoscale materials, Editor(s): Kunal Mondal, In Metal Oxides, Metal Oxides for Biomedical and Biosensor Applications, Elsevier, 2022, Pages 407-435, ISBN 9780128230336, https://doi.org/10.1016/B978-0-12-823033-6.00014-4. Link 

13. H. J. Biswal, V Pandu Ranga, Ankur Gupta, "Multi-Objective Optimization of Laser-assisted Micro-hole Drilling with Evolutionary Algorithms", publication in Nature Inspired Optimization in Advanced Manufacturing Processes and Systems under series AI in Engineering,  published by CRC Press, 2020. ISBN 9780367532604.

14. H. J. Biswal, V Pandu Ranga, Ankur Gupta, “Electrodeposited Functional Platforms for Gas Sensing Applications”, published in book titled “Gas Sensors: Manufacturing, Materials, and Technologies” by Taylor and Francis, CRC Press, 2022.

15. Gulshan Kumar, Ankur Gupta, “IoT assisted Gas Sensing Technology”, published in book titled “Gas Sensors: Manufacturing, Materials, and Technologies” by Taylor and Francis, CRC Press, 2022.

16. Ankur Gupta, M. Kumar, S. B., “Introduction to Gas Sensors: Fundamental to Devices, published in book titled “Gas Sensors: Manufacturing, Materials, and Technologies” by CRC Press, 2022.

17. V. Kishnani, K. Mondal, Ankur Gupta, Introduction to metal oxide-based biosensing, Editor(s): Kunal Mondal, In Metal Oxides, Metal Oxides for Biomedical and Biosensor Applications, Elsevier, 2022, Pages 169-182, ISBN 9780128230336, https://doi.org/10.1016/B978-0-12-823033-6.00005-3. Link 

18. G. Kumar, S. Bhattacharya, and Ankur Gupta, “Electronic nose”, in book titled “Gas Sensors: Manufacturing, Materials, and Technologies” by Taylor and Francis, CRC Press, 2022.

19. Singh, Rajeev Kumar, Rakesh Kumar Phanden, Adam Jacso, and Ankur Gupta. "Introduction to MEMS and Microfluidics." In Advances in MEMS and Microfluidic Systems, pp. 1-10. IGI Global, 2023. DOI: 10.4018/978-1-6684-6952-1.ch001.