Journal Articles

After Joining IISc

2024

Finite element modelling of deformation behaviour and failure analysis of roller and pin assembly in bucket wheel excavators used in opencast coal mines

A Singh,C S Kumar, P Das

Engineering Failure Analysis

Phase Field Model of Semi-solid Slurry Generation and Isothermal Coarsening of Novel Al-15Mg2Si-4.5Si Composite

I Mukherjee, P Das

Metallurgical and Materials Transactions B

Microstructure evolution during solidification in a low superheat casting process of the Al-Mg2Si composites having excess Si: A phase field study

I Mukherjee, P Das

Materials Today Communications

Three-dimensional micromechanical modelling of deformation behavior of rheocast A356 alloy

D K Pandey, P Das

International Journal of Metalcasting

A novel atomistic approach of estimating interfacial free energy and growth kinetics of primary Mg2Si during semi solid slurry formation of the novel Al–15Mg2Si–4.5Si composite

I Mukherjee, P Das

Applied Physics A

Efect of Fluid Flow on Microstructure Evolution During Rheo Gravity Die Casting of Novel Al–15Mg2Si–4.5Si Composite

I Mukherjee, P Das

Trans IIM (Springer Nature)

A phenomenological constitutive model of Novel Rheo Gravity Die Cast Al-15Mg2Si-4.5Si-0.01Sr0.015B composite

D K Pandey, P Das

Materials Today Communications

2023

Multiphysics Modelling of Laser Powder Bed Fusion Based Additive Manufacturing of Single‑Track Build of Ti6Al4V Alloy

S Kumar, P Das

Trans IIM (Springer Nature)

Effect of Strontium Addition on Semi-Solid Slurry Generation of Novel Al–15Mg2Si–4.5Si Composite During Cooling Slope Rheoprocessing

P Das , Md. Afraaz S.

Trans IIM (Springer Nature)

Development of a Cu/MoS2/Ni Self-Lubricating Composite Clad through Laser Additive Approach over a Ti6Al4V Substrate and Its Characterizations

S Kumar, P Das

Langmuir (ACS)

Isothermal coarsening of cooling slope processed semi-solid A380 Al alloy slurry

P Das

International Journal of Cast Metals Reserach

Microstruture evolution during cooling slope rheoprocessing of Novel Al-15Mg2Si-4.5Si composite

P Das

Solid State Phenomena

A molecular dynamics study of nucleation and grain growth of novel Al-15Mg2Si-4.5Si composite during rapid cooling based semi solid slurry preparation

I Mukherjee, P Das

Solid State Phenomena

A molecular dynamics study of sintering of micro injection moulded alumina nano particles

I Mukherjee, P Das

Philosophical Magazine

Optimisation of melt pouring temperature and low superheat casting of Al-15Mg2Si-4.5Si composite

P Das

International Journal of Cast Metals Reserach

Phase field model of microstructure formation during cooling slope slurry generation of novel Al15Mg2 Si-4.5Si composite

P Das

IOP Conference Series: Materials Science and Engineering

Multiphase flow model of semi solid solidification of novel Al15Mg2Si-Si composite

P Das

IOP Conference Series: Materials Science and Engineering

Multiphase flow simulation and experimental validation of cooling slope Rheoprocessing of A380 alloy

P Das

International Journal of Metalcasting

Effect of Melt Treatment on Microstructure Evolution and Coarsening Mechanism of A356 Al Alloy During Cooling Slope Rheoprocessing

P Das

Metallurgical and Materials Transactions B

2022

Microstructure and Mechanical Properties of Cooling Slope Rheocast Al-7Si-0.3 Mg Alloy and Development of a Rheo Pressure Die Cast Knuckle Housing

P Das

Metallurgical and Materials Transactions B

Effect of Process variables and melt treatment conditions during cooling slope semi solid slurry generation process of Al-7Si-0.3Mg alloy

P Das

Materials Today Communications 33 10494

Microstructural Morphology and Mechanical Properties of Cooling Slope Rheocast A380 Al Alloy

P Das

Journal of Materials Engineering and Performance

Primary Phase Morphology of Cooling Slope-Processed A356 Al Alloy and Its Effect on Rheological Properties

P Das

International Journal of Metalcasting

Microstructure evolution during rheoprocessing of A356 Al alloy using cooling slope

P Das

International Journal of Metalcasting

An Investigation on Machinability during Turning Al-Mg2Si-Si Composite in Dry Condition

D Biswas, A Banerjee, S Das, P Das

Indian Science Cruiser

Earlier Publications

Globularization of Primary Phase of Al–7Si–0.3 Mg Alloy During Cooling Slope Processing and Isothermal Holding

P Das, P Dutta

Transactions of the Indian Institute of Metals 74 (5), 1241-1251

2021

Three-dimensional phase field simulation of spheroidal grain formation during semi solid processing of Al-7Si-0.3 Mg alloy

P Das, P Dutta

Computational Materials Science 184, 109856

2020

Studies on die filling of A356 Al alloy and development of a steering knuckle component using rheo pressure die casting system

P Das, B Bhuniya, SK Samanta, P Dutta

Journal of Materials Processing Technology 271, 293-311

2019

Multiphase model of semisolid slurry generation and isothermal holding during cooling slope rheoprocessing of A356 Al alloy

P Das, SK Samanta, B Mondal, P Dutta

Metallurgical and Materials Transactions B 49 (4), 1925-1944

2018

Phase field modelling of microstructure evolution and ripening driven grain growth during cooling slope processing of A356 Al alloy

P Das, P Dutta

Computational Materials Science 125, 8-19

2016

Microscale deformation behavior of rheocast Al–7Si–0.3 Mg alloy

P Das, ST Islam, SK Samanta, S Das

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of …

2016

Micromechanics based modelling of deformation behaviour of grain refined rheocast Al–7Si–0.3 Mg alloy

P Das, ST Islam, S Das

Materials Science and Technology 32 (9), 898-914

2016

Microstructure evolution and rheological behavior of cooling slope processed Al-Si-Cu-Fe alloy slurry

P Das, SK Samanta, S Bera, P Dutta

Metallurgical and Materials Transactions A 47 (5), 2243-2256

2016

Die filling behaviour of semi solid A356 Al alloy slurry during rheo pressure die casting

P Das, SK Samanta, S Tiwari, P Dutta

Transactions of the Indian Institute of Metals 68 (6), 1215-1220

2015

Wear behavior of cooling slope rheocast A356 Al alloy

P Das, BK Show, A Rathore, SK Samanta

Tribology Transactions 58 (6), 1054-1066

2015

Rheological behavior of semi-solid TiB2 reinforced Al composite

S Thadela, B Mandal, P Das, H Roy, AK Lohar, SK Samanta

Transactions of Nonferrous Metals Society of China 25 (9), 2827-2832

2015

Rheological behavior of Al-7Si-0.3 Mg alloy at mushy state

P Das, SK Samanta, P Dutta

Metallurgical and Materials Transactions B 46 (3), 1302-1313

2015

Deformation behaviour of Rheocast A356 Al alloy at microlevel considering approximated RVEs

SK Islam, P Das, S Das

Metals and Materials International 21 (2), 311-323

2015

Fracture property correlation of Rheocast (EMS) and Thixocast 6061 Aluminium alloy

PD Shailesh Kumar Singh, Prosenjit Das, Kamanio Chattopadhyay

Solid State Phenomena 217, 405-411

2015

Optimization of degree of sphericity of primary phase during cooling slope casting of A356 Al alloy: Taguchi method and regression analysis

P Das, SK Samanta, R Das, P Dutta

Measurement 55, 605-615

2014

Semisolid processing of A380 Al alloy using cooling slope

P Das, M Kumar, SK Samanta, P Dutta, D Ghosh

Materials and Manufacturing Processes 29 (4), 422-428

2014

Mechanical And Fracture Behaviour Of Ultra Fine Grained 7075 Al Alloy

PD R. Jayaganthan, I. V. Singh

LAP LAMBERT Academic Publishing, Germany, ISBN-10: 3659585521, ISBN-13: 978 …

2014

Study of Microstructure Evolution during Semi-Solid Processing of an in-Situ Al Alloy Composite

SKS Santosh Kumara, Prosenjit Das, Sandeep K. Tiwaria, Manas K. Mondal ...

Materials and Manufacturing Processes

2014

Phase Field Simulation of Equiaxed Microstructure Formation during Semi-solid Processing of A380 Al Alloy

PKPD Prosenjit DAS, Sudip Kumar SAMANTA

ISIJ International 54 (7), 1601-1610

2014

Evaluation of primary phase morphology of cooling slope cast Al-Si-Mg alloy samples using image texture analysis

P Das, S Dutta, SK Samanta

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of …

2013

Experimental finding of initiation fracture toughness and FEM simulation of fracture behaviour of UFG 7075 Al Alloy

P Das, R Jayaganthan, I V Singh

Advanced Materials Letters 4 (9), 668-681

2013

Study of physical characteristics of nickel wicks developed by metal injection moulding

SK Samanta, P Das, AK Lohar

Powder metallurgy 56 (3), 221-230

2013

Failure analysis of a head gear pulley used in coal mines

AK Shukla, P Das, S Dutta, S Ray, H Roy

Engineering Failure Analysis

2013

A novel approach of manufacturing Nickel Wicks for loop heat pipes using Metal Injection Moulding (MIM)

SKAKC S K SAMANTA, PROSENJIT DAS, A K LOHAR, H ROY

Sadhana 38 (2), 281–296

2013

Studies on rheocasting using cooling slope

P Das, SK Samanta, H Chattopadhyay, P Dutta

Solid State Phenomena 192, 341-346

2013

Eulerian two-phase flow simulation and experimental validation of semisolid slurry generation process using cooling slope

P Das, SK Samanta, H Chattopadhyay, BB Sharma, P Dutta

Materials Science and Technology 29 (1), 83-92

2013

Rheological characterization of semi-solid a356 aluminium alloy

P Das, SK Samanta, H Chattopadhyay, P Dutta, N Barman

Solid State Phenomena 192, 329-334

2013

An experimental evaluation of material properties and fracture simulation of cryorolled 7075 Al alloy

P Das, IV Singh, R Jayaganthan

Journal of materials engineering and performance 21 (7), 1167-1181

2012

Development of tubular Ni wick used in LHP for space applications

S Samanta, B Sharma, P Das, A Lohar

Frontiers in Heat Pipes (FHP) 2 (4)

2012

Mechanical properties and tensile fracture mechanism of rheocast A356 Al alloy using cooling slope

P Das, SK Samanta, T Ray, BRK Venkatpathi

Advanced Materials Research 585, 354-358

2012

Crack growth simulation of bulk and ultrafine grained 7075 Al alloy by XFEM

P Das, IV Singh, R Jayaganthan

International Journal of Materials and Product Technology 44 (3-4), 252-276

2012

Effect of pouring temperature on cooling slope casting of semi-solid Al-Si-Mg alloy

P Das, SK Samanta, H Chattopadhyay, P Dutta

Acta Metall. Sin.(Engl. Lett.) 25 (5), 329-339

2012

Microstructural Evolution of A356 Al Alloy During Flow Along a Cooling Slope

P Das, SK Samanta, BRK Venkatpathi, H Chattopadhyay, P Dutta

Transactions of the Indian Institute of Metals, 1-4

2012

Fatigue behaviour and crack growth rate of cryorolled Al 7075 alloy

P Das, R Jayaganthan, T Chowdhury, IV Singh

Materials Science and Engineering: A 528 (24), 7124-7132

2011

Tensile and impact-toughness behaviour of cryorolled Al 7075 alloy

P Das, R Jayaganthan, IV Singh

Materials & Design 32 (3), 1298-1305

2011

Investigation of Fracture Mechanism of Ultrafine-Grained 7075 Al alloy Under Different Loads

PD I. V. Singh, R. Jayaganthan

International Journal of Applied Engineering research 6 (5), 841-848

2011

Characterization of impact fracture surfaces under different processing conditions of 7075 Al alloy using image texture analysis

P Das, S Dutta, H Roy, R Jayaganthan

Int. J. Technol. Eng. Syst 2 (2), 143-147

2011

Improvement of fracture toughness (K1c) of 7075 Al alloy by cryorolling process

P Das, R Jayaganthan, T Chowdhury, I Singh

Materials Science Forum 683, 81-94

2011