CONFERENCES

Accepted

1.  Development and characterization of ZTA micro parts using Micro Ceramic Injection Molding (µ-CIM), highlighting its relevance for advanced biomedical and microengineering applications

Astik Kumar, Prosenjit Das*

40th International Conference on Biomaterials- Bio-MANTHAN (Bio-MANTHAN 2025), Indian Institute of Technology Ropar, Punjab, India

2. Microstructure and Mechanical Properties of Compocast Ex Situ A356-MWCNT composite

Aditya Anand, Prosenjit Das*

International Conference on Structural Die casting and Semisolid processing - S2P 2026

3. Thermo Solutal Convection and Entropy Generation during Rheo Gravity Die casting of Novel Al-15Mg2Si-4.5Si-0.5B composite

Md Tabraiz Imam, Prosenjit Das*

International Conference on Structural Die casting and Semisolid processing - S2P 2026

4. Finite Element Modelling of melt-pool Evolution during Laser powder Bed Fusion processing of Ti6Al4V alloy

Love Kush Tak, Shakti Kumar, Manish Arora, Prosenjit Das*

International Conference on Industry 4.0 and Advanced manufacturing (I-4AM 2026)

5. Multiphase CFD modelling of Solidification Transport phenomena and Microstructure evolution in Rheocast Al-7Si-XMWCNT composite 

Sambit Kumar Sahoo, Prosenjit Das*

79th  Annual Technical Meeting of The Indian Institute of Metals (IIM ATM 2025) and  International Conference on Advanced Materials and Critical Minerals for Energy Transition,  IIT Hyderabad, Kandi, Sangareddy, Hyderabad, India

6. Effect of Cu addition on microstructure, mechanical properties, and Heat treatment response of in situ Al-15Mg2Si-4.5Si composite 

Mohammed Kedir, Prosenjit Das*

79th  Annual Technical Meeting of The Indian Institute of Metals (IIM ATM 2025) and  International Conference on Advanced Materials and Critical Minerals for Energy Transition,  IIT Hyderabad, Kandi, Sangareddy, Hyderabad, India

7. Effect of MWCNT Reinforcement on Rheocast Al-11Si Alloy Composite 

Aditya Ananda , Prosenjit Das*, Subodh Kumar 

79th  Annual Technical Meeting of The Indian Institute of Metals (IIM ATM 2025) and  International Conference on Advanced Materials and Critical Minerals for Energy Transition,  IIT Hyderabad, Kandi, Sangareddy, Hyderabad, India

8. A study of micromechanical deformation behavior of in-situ Al-15Mg2Si-4.5Si-0.01Sr-0.015B composite 

Durgesh Kumar Pandey, Prosenjit Das*  

8th International Conference on Recent Advances in Composite Materials (ICRACM-2025) Department of Civil Engineering, Indian Institute of Technology (BHU), Varanasi 2nd -4th Dec 2025  

Presented

1. Modeling the Deformation Behavior of Al-Si-Cenosphere Hybrid Foams at Varying Strain Rates 

Ravi Kumar, Prosenjit Das* 

14th International Symposium on Plasticity and Impact Mechanics (IMPLAST 2025) at the Indian Institute of Technology Roorkee (IIT Roorkee), Roorkee, India

2. A Crystal Plasticity Study of 42CrMo4V steel: Numerical and Experimental Evaluation of High-Strain Rate Deformation

Anubhav Singh, Prosenjit Das* 

14th International Symposium on Plasticity and Impact Mechanics (IMPLAST 2025) at the Indian Institute of Technology Roorkee (IIT Roorkee), Roorkee, India

3. Phase field model of modification of microstructure of Novel Al-15Mg2Si-4.5Si composite by addition of strontium during semi-solid processing 

Indrani Mukherjee*, Prosenjit Das

International Conference on Processing and Manufacturing of Advanced Materials Processing, fabrication, properties, Applications (THEMEC' 2025), Tours, France, 2025

4. Microstructural and Morphological Evolution of Novel In-Situ Al-15Mg2Si-4.5Si Composite with Strontium Addition 

Mohammed Kedir*, Prosenjit Das

5. International Conference on Processing and Manufacturing of Advanced Materials Processing, fabrication, properties, Applications (THEMEC' 2025), Tours, France, 2025 

6. Development of Multiphase and Multiscale Process Models during Compocasting of Novel Ex-situ Al-7Si-0.3Mg-MWCNT Composite. 

Prosenjit Das, Indrani Mukherjee, Sambit Kumar Sahoo, and  Aditya Anand, 

KC 75: International Conference (Innovative Materials Research, Feb 2025), at Department of Materials Engineering, IIT Jammu, India

7. Weldability Study of Al-Mg2Si-Si Metal Matrix Composite Using Tungsten Inert Gas Welding 

Soumojit Dasgupta, Subham Dey, Sohel Rana, Dr. Bappa Das, Dr. Santanu Das* and Dr. Prosenjit Das

National Welding Seminar (NWS), Jamshedpur, India, 2024

8. Microstructure and mechanical properties of TIG-based wire arc additively manufactured ER5556 alloy 

Bappa Das*, Sambit Kumar Sahoo and Prosenjit Das

      International Conference and Workshop on Additive Manufacturing and Characterization (ICAMC), 2025

9. Solidification Transport phenomena and Microstructure Evolution in Al-7%Si-MWCNT composite: An Eulerian Multiphase flow CFD model

Sambit Kumar Sahoo, Aditya Anand and Prosenjit Das* 

     78th Annual Technical Meeting The Indian Institute of Metals (IIM), 2024

10. Effect of Fin Geometry on Thermal Performance of Al-Si-MWCNT composite based CPU Heat Sink

Bishub Choudhury and Prosenjit Das* 

     78th Annual Technical Meeting The Indian Institute of Metals (IIM), 2024

11. Development and Characterization of Stir Cast A356 Aluminium Alloy Matrix Composites Reinforced with Multi-Walled Carbon Nanotubes (MWCNTs)

Aditya Anand, Prosenjit Das* and Subodh Kumar 

     78th Annual Technical Meeting The Indian Institute of Metals (IIM), 2024

12. Dynamic Modelling and Analysis of Roller-Pin Assembly of Bucket Wheel Excavator

Anubhav Singh and Prosenjit Das* 

     78th Annual Technical Meeting The Indian Institute of Metals (IIM), 2024

13. Die Cavity Optimization of two-wheeler brake discs made with novel Al-15Mg2Si-4.5Si composite

 Mohamed afraaz sultan, Aditya Anand and Prosenjit Das*

      International Conference on Aluminum Alloys (ICAA), GA, USA, 2024 

14. Microstructure and tensile properties of Stirrcast A356-MWCNT composite 

Aditya Anand, Subodh Kumar* and Prosenjit Das 

       International Conference on Aluminum Alloys (ICAA), GA, USA, 2024 

15. Phase Field modelling of Microstructure evolution during Multilayer deposition of IN718 during Directed Energy Deposition 

Pavan Chandu and Prosenjit Das*

      AFMD-2024,  SRMIST, Kattankulathur, India

16. Finite Element Simulation of Solid-State Sintering of Micro Ceramic Injection Molded Alumina based on Phenomenological Constitutive Law  

Arnab Pyne and Prosenjit Das*

      AFMD-2024,  SRMIST, Kattankulathur, India

17. Weldability study of Al-7.7%-SiC metal matrix composite using tungsten inert gas welding 

Soumojit Dasgupta, Santanu Das and Prosenjit Das 

      IC 2024 of International Institute of Welding, Bengaluru, India 

18. Effect of fluid flow on microstructure evolution during Rheo Gravity die casting of Novel Al-15Mg2Si-4.5Si composite 

Indrani Mukherjee  and Prosenjit Das*  

      ICSSP8 IIT Jodhpur

19. Effect of strontium addition on semi solid slurry generation of Novel Al-15Mg2Si-4.5Si composite during Cooling Slope Rheoprocessing

Prosenjit Das*  and Mohamed Afraaz Sultan

      ICSSP8 IIT Jodhpur

20. Phase Field Modelling of Microstructure evolution of Inconel 718 superalloy during Directed Energy Deposition and subsequent Direct Ageing

Pavan Chandu and Prosenjit Das*  

      ICSSP8 IIT Jodhpur

21. Multiphysics modelling of Laser Powder Bed Fusion based additive manufacturing of single-track build of Ti6Al4V alloy

Shakti Kumar and Prosenjit Das*  

      ICSSP8 IIT Jodhpur

22. Development and quasi-static compressive behaviour of Al-Cenosphere composite foam 

Ashish Kumar Singh, Anubhav Singh and Prosenjit Das*  

     9th International & 30th All India Manufacturing Technology, Design and Research (AIMTDR) Conference, IIT (BHU), Varanasi, 2023

23. Effect of Boron addition on microstructure and mechanical properties of Al-15%Mg2Si-4.5%Si MMC  

Mohammed Kedir and Prosenjit Das*  

77th Annual Technical Meeting The Indian Institute of Metals (IIM), 2023

24. Deformation Behaviour of Bucket Wheel Excavator Roller and Pin Assembly Made of 42CrMo4 Steel

Anubhav Singh and Prosenjit Das*  

     77th Annual Technical Meeting The Indian Institute of Metals (IIM), 2023

25. Micromechanical study of deformation behavior of rheocast Al-15Mg2Si-4.5Si composite   

Durgesh Kumar Pandey and Prosenjit Das*  

77th Annual Technical Meeting The Indian Institute of Metals (IIM), 2023

26. Investigating machinability in turning Al-Mg2Si-Si workpiece using groove type carbide insert 

Dipanwita Biswas, Amit Banerjee, Santanu Das and Prosenjit Das*  

     1st International Conference on Mechanical Design and Manufacturing, IIEST Shibpur, 2023

27. Development of Tungsten inert gas welding and its application on Aluminium alloys and MMC-A review

Soumojit Dasgupta, Santanu Das and Prosenjit Das  

28. Exploring machining capabilities of Al-Mg2Si-Si rod with coated carbide insert 

Dipanwita Biswas, Ananya Banerjee, Santanu Das* and Prosenjit Das

AIMTDR Conference 2023, Varanasi, India 

29. Influence of machining parameters on Turning Al-Mg2Si-Si composite

Dipanwita Biswas, Ananya Banerjee, Santanu Das and Prosenjit Das

37th National Convention of Production Engineers and Seminar on “Recent Trends and Future Direction in Production Engineering and Management: Vision 2030”, Kolkata, India 

30. Advancements in tungsten inert gas welding of aluminium base alloy and MMC 

Soumojit Dasgupta, Santanu Das and Prosenjit Das  

WELD 2023, Kolkata, India

31. Weldability of aluminium based composites and its alloys using tungsten inert gas welding- a brief review 

Soumojit Dasgupta, Santanu Das and Prosenjit Das  

National Welding Meet 2021, Tiruchirapalli, India