Embedded Files
Accepted or In press
Accepted or In press
Doan Hung Vo, Cam-Tu Hoang-Ngoc, Sang Moon Kim, Hyungbum Park*, Tea-Sung Jun*. Micro Ring-core FIB-DIC Milling in Residual Stress Analysis: Advances, Applications, and Emerging Prospects. Metals and Materials Internationals. Accepted.
Hyun-Hak Kang, Min-Su Lee, Hafiz Muhammad Rehan Tariq, Tea-Sung Jun*. Effect of cryogenic quenching on microstructural evolution and tribological behaviour of Ti-6Al-4V alloy. Metals and Materials International. In press. Link.
Hafiz Muhammad Rehan Tariq, Umer Masood Chaudry, Jeong-Rim Lee, Nooruddin Ansari, Mansoor Ali, Tea-Sung Jun*. Tensile fracture mode transitions from subzero to elevated deformation temperature in Mg-6Al-1Zn alloy. International Journal of Minerals, Metallurgy and Materials. Accepted. Link.
2025
2025
133. Umer Masood Chaudry, Hafiz Muhammad Rehan Tariq, Zeeshan Asif, Ameeq Farooq, Asima Tayyeb, Hongbiao Dong, Mansoor Ali*, Tea-Sung Jun*. Influence of CaO alloying on the corrosion resistance and biocompatibility of AZ61 alloy in physiological environments. Journal of Alloys and Compounds 1048 (2025) 185197. Link
132. A. Rajesh Kannan, Hafiz Muhammad Rehan Tariq, Muhammad Ishtiaq, Ha-Seong Baek, Umer Masood Chaudry, Tea-Sung Jun*. Impact of post-annealing treatment on the microstructure, re-crystallization and mechanical behavior of hot-rolled Mg-Al-Zn-Ca alloy. Materials (2025) 18(21) 4897. Link
131. Hafiz Muhammad Rehan Tariq, Umer Masood Chaudry, Zeeshan Asif, Saira Niaz, Ameeq Farooq, HongBiao Dong*, Tea-Sung Jun*. Influence of Al2Ca particles on the corrosion behavior of AZX311 Mg alloy in chloride and sulfate electrolytes under varying conditions. Electrochimica Acta 543 (2025) 147546. Link
130. A. Rajesh Kannan, Yasam Palguna, Hafiz Muhammad Rehan Tariq, N. Siva Shanmugam, Tea-Sung Jun*. Elevated temperature tensile properties of wire arc additively manufactured 308L austenitic stainless steel. International Journal of Minerals, Metallurgy and Materials 32(9) (2025) p.2164-2176. Link
129. A. Rajesh Kannan, V. Rajkumar, Yasam Palguna, K Sanjeeviprakash, Hafiz Muhammad Rehan Tariq, N. Siva Shanmugam, and Tea-Sung Jun*. Failure analysis of gas metal arc welded Inconel 800 under monotonic and high-cycle fatigue loading. Engineering Failure Analysis 182 (2025) 110085. Link
128. Seung Weon Yang, Si Mo Yeon, Tea-Sung Jun, Dain Choi, Ha-Seong Baek, Du-Rim Eo*, Hyup Lee*, Il Shon*. Investigation of bonding integrity and crack susceptibility in pure copper-STS630 bimelattic structure fabricated by powder bed fusion. Journal of Materials Research and Technology 38 (2025) p.2341-2359. Link
127. Yeonju Noh, Arasappan Rajesh Kannan, Jeong-Rim Lee, Hyun-Hak Kang, Tea-Sung Jun*. Effect of welding speed on the cryogenic mechanical properties of friction stir welded AA6061-T6 alloy. Materials Science and Engineering A 943 (2025) 148839. Link
126. Min-Ki Ji, Hyungsung Son, Jinkeun Oh, Seongwoo Kim, Fathia Alkelae, Tea-Sung Jun*. Effects of heat treatment on tribological behaviour of Al-Si coated 22MnB5 and SKD61 tool steels in hot stamping. Metals and Materials International 31 (2025) p.1949-1961. Link
125. Seunghwan Moon, Seungmuk Ji, Yoonseok Ko, Min-Su Lee, Tea-Sung Jun, Dong-Ik Kim, and Jong-Souk Yeo*. Effects of spatial uniformity of continuous and pulse laser irradiation on the microstructure and mechanical properties of Ti-6Al-4V in powder bed fusion. Materials Today Communications 46 (2025) 112880. Link
124. Sumaira Sadiq, Hafiz Muhammad Rehan Tariq, Seung-Chang Han, Nur Izzati MNuhammad Nadzri, Tea-Sung Jun*. Impact of cyclic cryogenic treatment on the hardening behavior of pre-strained CoCrFeMnNi alloy. Journal of Materials Research and Technology 36 (2025) p.9549-9555. Link
123. Hafiz Muhammad Rehan Tariq, Hyun-Hak Kang, Umer Masood Chaudry, Muhammad Kashif Khan, Tea-Sung Jun*. Impact of surface roughness on the yield drop of hot rolled AZX311 Mg alloy. Advanced Engineering Materials 27(9) (2025) 2401689 (Editor’s Choice) Link
122. Umer Masood Chaudry, Ameeq Farooq, Muhammad Sufyan, Hafiz Muhammad Rehan Tariq, Abdul Malik, Minki Kim, Ali Tariq, Kotiba Hamad, Tea-Sung Jun*. Corrosion behavior of AZ31 and AZ31-0.5Ca in different concentrations of NaCl and Na2SO4 at various temperatures. Corrosion 85(3) (2025) p.232-243. Link
121. Min-Ki Ji, Hyunsung Son, Gyu Hyeon Shim, Ho Seon Ahn, Tea-Sung Jun*. Effects of Fe diffusion driven by thermal history on tribological behaviour of Al-Si coated 22MnB5 under varying load conditions in hot stamping. Journal of Materials Research and Technology 35 (2025) p.5475-5483. Link
120. Hafiz Muhammad Rehan Tariq, Muhammad Ishtiaq, Hyunhak Kang, Umer Masood Chaudry, Tea-Sung Jun*. A critical review on the comparative assessment of rare-earth and non-rare-earth alloying in Magnesium alloys. Metals 15(2) (2025) 128. Link
119. Umer Masood Chaudry, Hafiz Muhammad Rehan Tariq, Kotiba Hamad*, Muhammad Kashif Khan*, Tea-Sung Jun*. Twinning-induced texture weakening in Mg alloy and its consequent influence on ductility and formability. Materials Science and Technology 41(2) (2025) p.101-105. Link
118. Min-Su Lee, Nicolò Maria della Ventura, Amit Sharma, Chunhua Tian, Xavier Maeder, Tea-Sung Jun*. Abnormal twin-twin interaction by {11-22} twinning in [0001]-oriented micropillar of pure titanium at cryogenic temperature. Scripta Materialia 255 (2025) 116402. Link
2024
2024
117. Hafiz Muhammad Rehan Tariq, Umer Masood Chaudry, Muhammad Ishtiaq, Minki Kim, Mansoor Ali*, Tea-Sung Jun*. Effect of Al addition on the room and cryogenic temperature deformation of Mg-xAl-1Zn-1Ca alloy (x=1, 2 wt.%). Journal of Magnesium and Alloys 12 (2024) p.4694-4708. Link
116. Umer Masood Chaudry, Yeonju Noh, Jeong-Rim Lee, Si Mo Yeon, Jongcheon Yoon, Hyub Lee, Tea-Sung Jun*. Comparative study of room and cryogenic deformation behavior of additive manufactured Ti-6Al-4V. Advanced Engineering Materials 26(20) (2024) 2470052 (Inside Back Cover Article) Link
115. Jeong-Rim Lee, Min-Su Lee, Ha-Seong Baek, Si Mo Yeon, Minki Kim, Tea-Sung Jun*. Nanoindentation creep response of Ti–6Al–4V ELI alloy manufactured via powder bed fusion. Journal of Materials Research and Technology 33 (2024) p.2803-2811. Link
114. Umer Masood Chaudry, Seung-Chang Han, Kaab bin Tayyab, Ameeq Farooq, Woo-Sung Kim, Tea-Sung Jun*. Unraveling the anisotropic corrosion behavior along the building direction in laser powder bed fusion processed Hastelloy X. Journal of Materials Research and Technology 33 (2024) p.1188-1200. Link
113. Hafiz Muhammad Rehan Tariq, Umer Masood Chaudry, Joung Sik Suh, Young Min Kim, Tea-Sung Jun*. Effect of cryogenic temperature on the strengthening mechanisms of AZ61 Mg alloy extruded at different temperatures. Journal of Materials Research and Technology 33 (2024) p.335-348. Link
112. Seung-Chang Han, Yoon-Sun Lee, Ho-Jin Lee, Minki Kim, Tea-Sung Jun*. Revealing the microstructural evolution and mechanical response of Fe-based powder material based on flux-cored wire for directed energy deposition. Journal of Materials Research and Technology 32 (2024) p.4444-4455. Link
111. Min-Su Lee, Jeong-Rim Lee, Jong Woo Won, Yong-Taek Hyun, Tea-Sung Jun*. Strain localisation and grain boundary-mediated deformation in pure titanium at low and high temperatures: In-situ optical microscopy and digital image correlation. Materials Science and Engineering A 914 (2024) 147179. Link
110. Hafiz Muhammad Rehan Tariq, Umer Masood Chaudry, Chung-Soo Kim, Tea-Sung Jun*. Effect of calcium on the rate of grain boundary migration in pure magnesium during annealing. Metal and Materials International 30(7) (2024) p.2038-2043. Link (Front Cover Article)
109. Umer Masood Chaudry, Hafiz Muhammad Rehan Tariq, Nooruddin Ansari, Chung-Soo Kim, Soo Yeol Lee, Tea-Sung Jun*. Room and cryogenic deformation behavior of AZ61 and AZ61-xCaO (x=0.5, 1 wt.%) alloy. Journal of Magnesium and Alloys 12 (2024) p.1996-2009. Link
108. Jeong-Rim Lee, Min-Su Lee, Yeonju Noh, Tea-Sung Jun*. Thermal activation and dislocation dynamics in Ti-6Al-4V alloy. International Journal of Mechanical Science 277 (2024) 109426. Link
107. Hyun-Hak Kang, Seung-Chang Han, Min-Ki Ji, Jeong-Rim Lee, Tea-Sung Jun*, Achieving synergistic improvement of wear and mechanical properties in Ti-6Al-4V alloy by multiple cryogenic treatment. Journal of Materials Research and Technology 29 (2024) p.5118-5125. Link
106. Hafiz Muhammad Rehan Tariq, Umer Masood Chaudry, Chung-Soo Kim, Tea-Sung Jun*. Synergetic improvement in strength and ductility of AZX211 Mg alloy facilitated by {10-12}-{01-12} twin-twin interactions during pre-stretching at cryogenic temperature. Journal of Materials Research and Technology 29 (2024) p.3249-3254. Link
105. Bohye Jeon, Min-Su Lee, Tea-Sung Jun, Youngung Jeong*. Temperature-dependent behavior of CP-Ti interpreted via self-consistent crystal plasticity simulation. Materials Science and Engineering A 890 (2024) 145904. Link
104. Umer Masood Chaudry, Hafiz Muhammad Rehan Tariq, Nooruddin Ansari, Chung-Soo Kim, Soo Yeol Lee, Tea-Sung Jun*. Exceptional improvement in the yield strength of AZ61 magnesium alloy via cryo-stretching and its implications on the grain growth during annealing. Journal of Alloys and Compounds 970 (2024) 172630. Link
103. Sung-Min Park, Dae Ha Kim, Tea-Sung Jun, Hyeon-Tae Im, Nam-Seok Kim, Chang-Soo Park, Kwangsuk Park*, Dong Hoe Kim*, Hyung-Ki Park*. The effect of V/C ratio on the phase formation behavior in VC based tool steel fabricated through powder metallurgy. Steel Research International 95 (2024) 2300514. Link
2023
2023
102. Umer Masood Chaudry, Hafiz Muhammad Rehan Tariq, Muhammad Zubair, Nooruddin Ansari, Tea-Sung Jun*. Implications of twinning on the microstructure development, crystallographic texture and mechanical performance of Mg alloy- a critical review. Journal of Magnesium and Alloys 11 (2023) 4146-4165. Link
101. Umer Masood Chaudry Hafiz Muhammad Rehan Tariq, Nooruddin Ansari, Adil Mansoor, Muhammad Kashif Khan*, Kotiba Hamad*, Tea-Sung Jun*. Effect of CaO content and homogenization treatment on the room temperature mechanical properties of AZ61 and AZ61-CaO alloys. Metals 13(12) (2023) 1962. Link
100. Umer Masood Chaudry, Min-Su Lee, Tea-Sung Jun*. Dynamic recrystallization of commercially pure titanium during cryogenic compression. Materials Characterization 206 (2023) 113423. Link
099. Yeonju Noh, Min-Su Lee, Umer Masood Chaudry, Tea-Sung Jun*. Effect of strain rate on the deformation of 6061-T6 aluminum alloy at cryogenic temperature. Materials Characterization 206 (2023) 113403. Link
098. Hong-geun Park, Seung-chang Han, Chanhoon Park, Younil Jung, Tea-Sung Jun, Taeseon Lee*. Effects of paint baking heat treatments on mechanical properties and microstructure of resistance spot-welded A5022-O and A6014-T4 alloys. Metals 13 (2023) 1697. Link
097. Yasir Zulfiqar, Asim Zulfiqar, Hafiz Waqar Ahmad, Umer Masood Chaudry*, Muhammad Kashif Khan, Tea-Sung Jun*. Detailed Structural Analysis of Cylindrical Steel Tank Subjected to Various Seismic Peak Ground Values Using FSI Approach. Applied Mechanics 4(3) (2023) p.990-1014. Link
096. Jong Woo Won*, Byeong-Chan Suh, Jae Suk Jeong, Yong-Taek Hyun, Min-Su Lee, Tea-Sung Jun. Tensile strain-hardening behavior and related deformation mechanisms of pure titanium at cryogenic temperature. Journal of Materials Research and Technology 26 (2023) p.1669-1676. Link
095. Ameeq Farooq, Ahsan Saleem, Kaab bin Tayyab, Umer Masood Chaudry*, Tea-Sung Jun*. Effect of micro-arc oxidation voltage on the morphology and electrochemical properties of AZ31B magnesium alloy. Modern Concepts in Materials Science 5(2) (2023) p.1-8. Link
094. Seung-Chang Han, Umer Masood Chaudry, Hafiz Muhammad Rehan Tariq, Tea-Sung Jun*. Mitigating HAZ softening after post weld heat treatment of friction stir welded ferrite-martensite DP steels followed by cryogenic quenching. Materials Letters 349 (2023) 134881. Link
093. Min-Su Lee, Jeong-Rim Lee, Ha-Seong Baek, Yong-Taek Hyun, Tea-Sung Jun*. Surface hardening and plastic stability of Ti-6Al-4V alloy by cryo-quenching. Materials Science and Engineering A 881 (2023) 145394. Link
092. Seung-Chang Han, Umer Masood Chaudry, Sandra Bernardo Cenalmor, Si Mo Yeon, Jongcheon Yoon, Hyub Lee, Kyeongtae Kim, Tea-Sung Jun*. Effect of heat treatment on corrosion and mechanical properties of M789 alloy fabricated using DED. Metals 13 (2023) 1214. Link
091. Min-Ki Ji, Min-Su Lee, Yong-Taek Hyun, Tea-Sung Jun*. Effect of holding time between cryogenic treatment and tempering process on microstructural and mechanical properties of Ti-6Al-4V alloy. Materials Today Communications 36 (2023) 106514. Link
090. Jeong-Rim Lee, Min-Su Lee, Si Mo Yeon, Jong Cheon Yoon, Hyup Lee, Tea-Sung Jun*. Unravelling anisotropic deformation behaviour of Ti-6Al-4V ELI fabricated by powder bed fusion additive manufacturing. Materials Characterization 202 (2023) 113017. Link
089. Min-Su Lee, Jeong-Rim Lee, Jong Bae Jeon, Yong-Taek Hyun, Tea-Sung Jun*. In-situ study of plastic anisotropy and dislocation hardening mechanism in Grade 1 commercially pure titanium. Journal of Materials Research and Technology 24 (2023) p.5389-5403. Link
088. Seung-Chang Han, Dario Ferreira Sanchez, Daniel Grolimund, Sang-Ho Uhm, Du-Youl Choi, Hong-Chul Jeong, Tea-Sung Jun*. Role of silicon on formation and growth of intermetallic phases during rapid Fe-Zn alloying reaction. Materials Today Advances 18 (2023) 100368 . Link
087. Umer Masood Chaudry, Gukin Han, Yeonju Noh, Tea-Sung Jun*. Effect of Ca alloying and cryogenic temperature on the slip transmission across the grain boundary in pure Mg. Journal of Alloys and Compounds 950 (2023) 169828 . Link
086. Umer Masood Chaudry, Seung-Chang Han, Tea-Sung Jun*. Effect of welding speed on the microstructure and texture development in the individual weld zone of friction stir welded DP780 steel. Journal of Materials Research and Technology 23 (2023) p.4976-4989. Link
085. Sheraz Ahmed, Wajahat Waheed Kazmi, Farah Nemat Butt, Muhammad Irshad, Farooq Sher, Syed Mohsin Ali Kazmi, Umer Masood Chaudry, Hassan Zeb, Tea-Sung Jun*, Muhammad Kashif Khan*. Fabrication of nanocage structured based electrocayalyst for oxygen evolution reactions. Materials Letters 331 (2023) 133416. Link
084. S. Cheon, J. Yu, S.H. Lee, M.-S. Lee, T.-S. Jun, T. Lee. Prediction of cryogenic- and room-temperature deformation behavior of rolled titanium using machine learning. Transactions of Materials Processing 32(2) (2023) p.74-80. Link
083. Jeong-Chan Lee, Yeonju Noh, Nam-Su Kim, Ki Beom Park, Hyunghoon Kim, Hyung-Hwan Cho, Hyung-Ki Park, Tea-Sung Jun*, Chang-Soo Park*. Effect of texture and temperature on strain-induced martensitic transformation in 304 austenitic stainless steel. Steel Research International 94(2) (2022) 2200243. Link
082. Yasir Zulfigar, M. Javed Hyder, Ahmad Jehanzeb, Hafiz Waqar Ahmad, Asim Zulfigar, Umer Masood Chaudry*, Tea-Sung Jun*. Numerical investigation for optimum ring baffle design to optimize tank structural strength subjected to resonant seismic sloshing. Structural Engineering International 33(2) (2023) p.350-360. Link
2022
2022
081. Min-Ki Ji, Yeonju Noh, Hyun-Hak Kang, Tea-Sung Jun*. Effects of cryogenic temperature on wear behavior of 22MnB5 under cold stamping. Tribology and Lubricants 38(6) (2022) p.241-246. Link
080. U.M. Chaudry, A. Farooq, M. Nabeel, M. Sufyan, A. Tayyeb, Sumbal Asif, A. Inam, Tea-Sung Jun*, K. Hamad*. Biodegradable properties of AZ31-0.5Ca magnesium alloy. Materials Technology 37(12) (2022) 2230-2241. Link
079. Umer Masood Chaudry, Kotiba Hamad*, Tea-Sung Jun*. Investigating the microstructure, crystallographic texture and mechanical behavior of pure Mg and Mg-2Al-1Zn-1Ca alloy. Crystals 12 (2022) 1330. Link
078. Seung-Chang Han, Umer Masood Chaudry, Jin-Young Yoon, Tea-Sung Jun*. Investigating local strain rate sensitivity of the individual weld zone in the friction stir welded DP 780 steel. Journal of Materials Research and Technology 20 (2022) p.508-515. Link
077. Umer Masood Chaudry, Yeonju Noh, Kotiba Hamad*, Tea-Sung Jun*. Effect of deformation temperature on the slip activity in pure Mg and AZX211. Journal of Materials Research and Technology 19 (2022) p.3406-3420. Link
076. Javed A.K. Tipu, Usman Rafiq, Muhammad Arif, Tariq Feroze, Hafiz Waqar, Umer Masood Chaudry*, Tea-Sung Jun*, Adnan Aslam Noon*. Development of multiscale composite with hybrid natural nanofibers. Materials 15 (2022) 4622. Link
075. Umer Masood Chaudry, Yeonju Noh, Gukin Han, Russlan Jaafreh, Tea-Sung Jun*, Kotiba Hamad*. Effect of CaO on structure and properties of AZ61 magnesium alloy. Materials Science and Engineering A 844 (2022) 143189 . Link
074. Si-Mo Yeon, Jongcheon Yoon, Tae Bum Kim, Seung Ho Lee, Tea-Sung Jun, Yong Son, Kyunsuk Choi*. Normalizing effect of heat treatment processing on 17-4 PH stainless steel manufactured by powder bed fusion. Metals 12(5) (2022) 704. Link
073. Gyu Hyeon Shim, Boyeon Kweon, Min Ki Ji, Tea-Sung Jun*, Ho Seon Ahn*. A high-temperature adhesive for stainless steel 304: Effect of Cr growth at the interface of alkali silicate adhesive. International Journal of Adhesion and Adhesives 116 (2022) 103152. Link
072. Min-Su Lee, Takuro Kawasaki, Takayuki Yamashita, Stefanus Harjo, Yong-Taek Hyun, Youngung Jeong, Tea-Sung Jun*. In-situ neutron diffraction study of lattice deformation behaviour of commercially pure titanium at cryogenic temperature. Scientific Reports 12 (2022) 3719. Link
071. Gukin Han, Jeong-Rim Lee, Yeonju Noh, Tea-Sung Jun*. The role of cryogenic quenching on the mechanical properties of FSWed 6061-T6 aluminium alloy. Materials Science and Engineering A 840 (2022) 142896. Link
070. Umer Masood Chaudry, Ameeq Farooq, Kaab bin Tayyab, Abdul Malik, Muhammad Kamran, Jung-Gu Kim*, Chuan Li, Kotiba Hamad*, Tea-Sung Jun*. Corrosion behaviour of AZ31 magnesium with calcium addition. Corrosion Science 199 (2022) 110205. Link
069. Umer Masood Chaudry, Russlan Jaafreh, Abdul Malik, Tea-Sung Jun*, Kotiba Hamad*, Tamer Abuhmed*. A comparative study of strain rate constitutive and machine learning models for flow behavior of AZ31-0.5Ca Mg alloy during hot deformation. Mathematics 10 (2022) 766. Link
068. Tea-Sung Jun*, Ayan Bhowmik, Xavier Maeder, Giorgio Sernicola, Tommaso Giovannini, Igor Dolbnya, Johann Michler, Finn Giuliani, Ben Britton. In-situ diffraction based observations of slip near phase boundaries in titanium through micropillar compression. Materials Characterizations 184 (2022) 111695. Link
067. Jeong-Rim Lee, Min-Su Lee, Simo Yeon, Jiyong Park, Tea-Sung Jun*. Influence of heat treatment and loading direction on compressive deformation behaviour of Ti-6Al-4V ELI fabricated by powder bed fusion additive manufacturing. Materials Science and Engineering A 831 (2022) 142258. Link
066. Gukin Han, Yeonju Noh, Umer Masood Chaudry, Sung Hyuk Park, Kotiba Hamad, Tea-Sung Jun*. {10-12} extension twinning activity and compression behavior of pure Mg and Mg-0.5Ca alloy at cryogenic temperature. Materials Science and Engineering A 831 (2022) 142189. Link
2021
2021
065. Umer Masood Chaudry, Sravya Tekumalla, Manoj Gupta*, Tea-Sung Jun*, Kotiba Hamad*. Designing highly ductile magnesium alloys: Current status and future challenges. Critical reviews in Solid state and Materials science 47(2) (2021) 194-281 . Link
064. Fathia Alkelae, Tea-Sung Jun*. Diamond-like carbon tribological endurance using an energetic approach. Tribology and Lubricants 37(5) (2021) p.179-188. Link
063. Abdul Malik, Umer Masood Chaudry, Kotiba Hamad*, Tea-Sung Jun*. Microstructure features and superplasticity of extruded, rolled and SPD-processed magnesium alloys: A short review. Metals 11 (2021) 1766. Link
062. Seung-Chang Han, Hyeong-Mo Park, Sang-Ho Uhm, Du-Youl Choi, Hong-Chul Jeong, Yeong-Jin Kim*, Tea-Sung Jun*. Evaluation of liquid metal embrittlement crack in resistance spot welds under intensive welding condition using industrial X-ray computed tomography and machine learning. Welding in the World 65 (2021) p.1887-1897. Link
061. Min-Su Lee, A-Ra Jo, Sun-Kwang Hwang, Yong-Taek Hyun, Tea-Sung Jun*. The role of strain rate and texture in the deformation of commercially pure titanium at cryogenic temperature. Materials Science and Engineering A 827 (2021) 142042 . Link
060. Tuyet Anh Pham, Le Vu Nam, Eunho Choi, Min-Su Lee, Tea-Sung Jun, Segeun Jang*, Sang Moon Kim*. Mechanically-stable Thinned-membrane for High performance Polymer Electrolyte Membrane Fuel Cell via Plasma Etching and Annealing Process. Energy & Fuels 35(14) (2021) p.11525-11532. Link
059. Umer Masood Chaudry, Seung-Chang Han, Fathia Alkelae, Tea-Sung Jun*. Effect of PWHT on the microstructure and mechanical performance of FSW DP780 steel. Metals 11(7) (2021) 1097. Link
058. Gyu Hyeon Shim, Boyeon Kweon, Min Su Lee, Ji Hoon Kim, Tea-Sung Jun, Taewan Kim, Dong-Wook Jerng, Omid Mahian, Somchai Wongwises, Ho Seon Ahn*. Highly improved mechanical and thermal properties of alkali silicate and graphene nanoplatelet composite adhesive. International Journal of Adhesion and Adhesives 110 (2021) 102942. Link
057. Gukin Han, Kyu-hong Lee, Jin-young Yoon, Tae-Wook Na, Kanghwan Ahn, Mun-Jin Kang, Tea-Sung Jun*. Effect of post-weld heat treatment on mechanical properties of local weld-affected zones in friction stir welded AZ31 plates. Materials Science and Engineering A 805 (2021) 140809. Link
056. Min-Su Lee, Min-Ki Ji, Yong-Taek Hyun, Eun-Young Kim, Tea-Sung Jun*. Effect of texture and temperature gradient on anisotropic plastic deformation of commercially pure titanium at room and low temperature. Materials Characterization 172 (2021) 110834. Link
055. Sang Won Lee, Gukin Han, Tea-Sung Jun, Sung Hyuk Park*. Effects of initial texture on deformation behaviour during cold rolling and static recrystallization during subsequent annealing of AZ31 alloy. Journal of Materials Science and Technology 66(10) (2021) p.139-149. Link
2020
2020
054. Min-Ki Ji, Tea-Sung Jun*. Review on the wear behavior of the hot stamping process with respect to friction testing methods. Tribology and Lubricants 36(6) (2020) p.350-358. Link
053. Min Ki Ji, Hyunsung Son, Jinkeun Oh, Seongwoo Kim, Kyungmok Kim, Tea-Sung Jun*. Effects of Al-Si coating thickness on 22MnB5 in hot stamping wear. Korean Journal of Metals and Materials 58(8) (2020) p.573-582. Link
052. Jeong-Rim Lee, Min-Su Lee, Hobyung Chae, Soo Yeol Lee, Taewook Na, Woo-Sung Kim, Tea-Sung Jun*. Effects of building direction and heat treatment on the local mechanical properties of direct metal laser sintered 15-5PH stainless steel. Materials Characterization 167 (2020) 110468. Link
051. Gukin Han, Hyung-Ki Park, Hyo Kyu Kim, Tea-Sung Jun*. Yittrium segregation induced grain growth inhibition during recrystallisation in binary titanium alloys. Materials Science and Engineering A 779 (2020) 139137. Link
050. Ayan Bhowmik*, Junyi Lee, Suki Adande, Ming Wang Koh, Tea-Sung Jun, Giorgio Sernicola, T. Ben Britton, Catherine M.F. Rae, Daniel Balint, Finn Giuliani. Investigating spatio-temporal deformation in single crystal Ni-based superalloys using in-situ diffraction experiments and modelling. Materialia 9 (2020) 100635. Link
049. Gyu Hyun Shim, Ji Hoon Kim, Tea-Sung Jun, Ho Seon Ahn*. Improving the water resistance and adhesion strength of a mixed alkali silicate adhesive by optimizing the molar ratio and curing condition. Journal of Adhesion Science and Technology (2020) 34(12) p.1269-1282. Link
2019
2019
048. Lifeng Ma, Kilho Eon, Jean Geringer, Tea-Sung Jun, Kyungmok Kim*. Literature review on fretting wear and contact mechanics of coated systems. Coatings 9(8) (2019) 501. Link
047. Muhammad Bilal Shahid, Seung-Chang Han, Tea-Sung Jun, Dong-Sam Park*. Effect of process parameters on the joint strength in ultrasonic welding of Cu and Ni foils. Materials and Manufacturing Processes 34(11) (2019) p.1217-1224. Link
046. Gukin Han, Hyung-Ki Park, Hyo Kyu Kim, Tea-Sung Jun*. Local and global deformation behaviour in rolled pure magnesium sheets at room temperature under different strain rates. Materials Science and Engineering A 762 (2019) 138110. Link
045. Min-Su Lee, Yong-Taek Hyun, Tea-Sung Jun*. Global and local strain rate sensitivity of commercially pure titanium. Journal of Alloys and Compounds 803 (2019) p.711-720. Link
044. Seungjun Lee, Sanghee Lee, Youngjin Na, Bummo Ahn, Heoryong Jung, Shing Shin Cheng, Namkeun Kim, Tea-Sung Jun, Yeongjin Kim*. Shock absorber mechanism based on an SMA spring for lightweight exoskeleton applications. International Journal of Precision Engineering and Manufacturing 20 (2019) p.1533-1541. Link
043. Tea-Sung Jun*, Xavier Maeder, Ayan Bhowmik, Gaylord Guillonneau, Johann Michler, Finn Giuliani, T Ben Britton. The role of β-titanium ligaments in the deformation of dual phase titanium alloys. Materials Science and Engineering A 746 (2019) p.394-405. Link
2018
2018
042. Changwook Seol, Segeun Jang, Junsoo Kim, Tea-Sung Jun, Sang Moon Kim*. Fabrication and design of mechanically stable and free-standing polymeric membrane with two-level apertures. Soft Matter 14(47) (2018) p.9522-9527. Link
041. Min-su Lee, Jong Bae Jeon, Tea-Sung Jun*. Investigation of local deformation behaviour of metallic materials and recent research trends: A review. Korean Journal of Metals and Materials 56(9) (2018) p.635-644. Link
040. Bo Lan*, T. Ben Britton, Tea-Sung Jun, Weimin Gan, Michael Hofmann, Fionn P.E. Dunne, Michael J.S. Lowe. Direct volumetric measurement of crystallographic texture using acoustic waves. Acta Materialia 159 (2018) p.384-394. Link
039. Qinmeng Luan, T. Benjamin Britton, Tea-Sung Jun*. Strain rate sensitivity in commercial pure titanium: The competition between slip and deformation twinning. Materials Science and Engineering A 734 (2018) p.385-397. Link
038. Tea-Sung Jun*, Woo-Hyun Song, Jong Youn Park, Dong Choon Hur. A comparison of mechanical properties and residual stresses of line pipes sized by expansion and compression process. International Journal of Pressure Vessels and Piping 163 (2018) p.1-7. Link
037. Ayan Bhowmik*, Junyi Lee, T. Ben Britton, Wenjun Liu, Tea-Sung Jun, Giorgio Sernicola, Morad Karimpour, Daniel Balint, Finn Giuliani. Deformation behaviour of [001] oriented MgO using combined in-situ nano-indentation and micro-Laue diffraction. Acta Materialia 145 (2018) p.516-531. Link
2017
2017
036. Alexander J. Knowles*, Tea-Sung Jun, Ayan Bhowmik, Nicholas G. Jones, T. Ben Britton, Finn Giuliani, Neil Jones, Howard J Stone, David Dye. A new bcc superlattice intermetallic reinforced titanium alloy system. Scripta Materialia 139 (2017) p.71-75. Link
035. Tea-Sung Jun, Kyungmok Kim*. Comparative study on fretting wear of aerospace, biomedical, and nuclear components. International Journal of Aerospace System Engineering 11(2) (2017) p.16-22. Link
034. P.J. Ashton, T-S. Jun, Z. Zhang, T.B. Britton, S.B. Leen, F.P.E. Dunne*. The effects of the beta phase on the micromechanical response of dual-phase titanium alloys. International Journal of Fatigue 100 (2017) p.377-387. Link
2016
2016
033. Tea-Sung Jun, Kyungmok Kim*. Influence of load on the friction coefficient of fretted electro-deposited coatings against steel and zirconia balls. International Journal of Surface Science and Engineering 10(5) (2016) p.514-526. Link
032. Zhen Zhang*, Tea-Sung Jun, T. Benjamin Britton, Fionn P.E. Dunne. Intrinsic anisotropy of strain rate sensitivity in single crystal alpha titanium alloy. Acta Materialia 118 (2016) p.317-330. Link
031. Zhen Zhang*, Tea-Sung Jun, T. Benjamin Britton, Fionn P.E. Dunne. Determination of Ti-6242 α and β slip properties using micro-pillar test and computational crystal plasticity. Journal of Mechanics and Physics of Solids 95 (2016) p.393-410. Link
030. Tea-Sung Jun*, David E.J. Armstrong, T. Benjamin Britton. A nanoindentation investigation of local strain rate sensitivity in dual-phase Ti alloys. Journal of Alloys and Compounds 672 (2016) p.282-291. Link
029. Tea-Sung Jun*, Zhen Zhang, Giorgio Sernicola, Fionn P.E. Dunne, T. Benjamin Britton. Local strain rate sensitivity of α phase within a dual-phase Ti alloys. Acta Materialia 107 (2016) p.298-309. Link
028. Tea-Sung Jun*, Giorgio Sernicola, Fionn P.E. Dunne, T. Benjamin Britton. Local deformation mechanisms of two-phase Ti alloy. Materials Science and Engineering A 649 (2016) p.39-47. Link
2008~2015
2008~2015
027. Tea-Sung Jun*, Alexander M. Korsunsky. Evaluation of residual stresses in 12%-Cr steel friction stir welds by the Eigenstrain Reconstruction Method. Journal of the Korean Society of Manufacturing Technology Engineers. 24(1) (2015) p.15-22. Link
026. M.Y. Xie*, T.S. Jun, A.M. Korsunsky, M. Drakopouos. Analysis of preferred orientations in linear friction welded (LFW) aluminium alloy specimens using “One-shot” multi-element energy dispersive synchrotron X-ray diffraction. Powder Diffraction 28(2) (2013) p.S327-S332. Link
025. X. Song*, M. Xie, F. Hofmann, T.S. Jun, T. Connolley, C. Reinhard, R.C. Atwood, L. Connor, M. Drakopoulos, S. Harding, A.M. Korsunsky. Residual stresses in linear friction welding of aluminium alloys. Materials & Design 50 (2013) p.360-369. Link
024. Tea-Sung Jun*, Felix Hofmann, Michael Hofmann, Alexander M. Korsunsky. Residual stress characterisation in 12%-Cr steel friction stir welds by neutron diffraction. Journal of Strain Analysis for Engineering Design 47(4) (2012) p.203-213. Link
023. F. Hofmann*, X. Song, B. Abbey, T-S. Jun, A.M. Korsunsky. High energy transmission Laue (HETL) micro-beam X-ray diffraction: A probe for intra-granular lattice orientation and elastic strain in thicker samples. Journal of Synchrotron Radiation 19 (2012) p.307-318. Link
022. Tea-Sung Jun*, Andrew M. Venter, Alexander M. Korsunsky. Inverse eigenstrain analysis of the effect of non-uniform sample shape on the residual stress due to shot peening. Experimental Mechanics 52 (2011) p.165-174. Link
021. R.J. Cernik*, C.C.T. Hansson, C.M. Martin, M. Preuss, M. Attallah, A.M. Korsunsky, J.P. Belnoue, T.S. Jun, P. Barnes, S. Jacques, T. Sochi, O. Lazzari. A Synchrotron tomographic energy-dispersive diffraction imaging study of the aerospace alloy Ti 6246. Journal of Applied Crystallography 44 (2011) p.150-157. Link
020. Tea-Sung Jun*, Kalin Dragnevski, Alexander M. Korsunsky. Microstructure, residual strain, and eigenstrain analysis of dissimilar friction welding joints. Materials & Design 31(1) (2010) p.S121-S125. Link
019. Tea-Sung Jun*, F. Rotundo, X. Song, L. Ceschini, Alexander M. Korsunsky. Residual strains in AA2024/AlSiC composite linear friction welds. Materials & Design 31(1) (2010) p.S117-S120. Link
018. L. Ceschini*, A. Morri, F. Rotundo, A. Korsunsky, Tea-Sung Jun. Saldatura lineare per attrito (LFW) di compositi a matrice metallica. METALLURGIA ITALIANA 3 (2010) p.23-30. Link
017. F. Rotundo, L. Ceschini, A. Morri*, T-S. Jun, A. Korsunsky. Mechanical and microstructural characterization of 2124 Al/25vol%SiCp joints obtained by linear friction welding (LFW). Composites Part A 41(9) (2010), p.1028-1037. Link
016. T-S. Jun*, A.M. Korsunsky. Eigenstrain reconstruction method in linear friction welded aluminium alloy and MMC plate. International Journal for Numerical Methods in Engineering 84(8) (2010) p.989-1008. Link
015. Tea-Sung Jun*, Alexander M. Korsunsky. Evaluation of residual stresses and strains using the Eigenstrain Reconstruction Method. International Journal of Solids and Structures 47(13) (2010) p.1678-1686. Link
014. J. Belnoue, T-S. Jun, F. Hofmann, B. Abbey, A.M. Korsunsky*. Evaluation of the overload effect on fatigue crack growth with the help of synchrotron XRD strain mapping. Engineering Fracture Mechanics 77(16) (2010) p.3216-3226. Link
013. F. Hofmann*, X. Song, T.S. Jun, B. Abbey, M. Peel, J. Daniels, V. Honkimäki, A.M. Korsunsky. High energy transmission micro-beam Laue synchrotron X-ray diffraction. Materials Letters 64 (2010) p.1302-1305. Link
012. L. Ceschini, A. Morri, F. Rotundo, T-S. Jun, A. Korsunsky*. A study on similar and dissimilar linear friction welds of 2024 Al alloy and 2124 Al/SiCp composite. Advanced Materials Research 89-91 (2010) p.461-466. Link
011. T-S. Jun*, X. Song, F. Rotundo, L. Ceschini, A. Morri, P. Threadgill, A.M. Korsunsky. Numerical and experimental residual stresses study of linear friction welded composite. Advanced Materials Research 89-91 (2010) p.268-274. Link
010. Andrew M. Venter*, Corrie La Grange, Felix Hofmann, Tea-Sung Jun, Jonathan Belnoue, Rudolph Van Heerden, Alexander Evans, Alexander M. Korsunsky. Synchrotron investigations of non-uniformly shaped shot-peened samples. Zeitschrift für Kristallographie 30 (2009) p.315-320. Link
009. T-S. Jun*, F. Hofmann, J. Belnoue, X. Song, M. Hofmann, A.M. Korsunsky. Tri-axial residual strains and stresses in railway rail by neutron diffraction. Journal of Strain Analysis for Engineering Design 44(7) (2009) p.563-568. Link
008. Alexander M. Korsunsky*, Xu Song, Jonathan Belnoue, Terry Jun, Felix Hofmann, Paulo F.P. De Matos, David Nowell, Daniele Dini, Oliver Aparicio-Blanco, Michael J. Walsh. Crack tip deformation fields and fatigue crack growth rates in Ti-6Al-4V. International Journal of Fatigue 31 (2009) p.1771-1779. Link
007. Tea-Sung Jun*, Shu Yan Zhang, Gareth Thomas, Patrick S. Grant, Alexander M. Korsunsky. A study of residual stresses in vacuum plasma sprayed tungsten coatings. Advances in X-ray Analysis 52 (2009) p.519-528. Link
006. Felix Hofmann*, Shu Yan Zhang, Tea-Sung Jun, Alexander M. Korsunsky. Analysis of strain induced peak broadening in titanium alloys. Advances in X-ray Analysis 52 (2009) p.217-224. Link
005. T-S. Jun*, A.M. Venter, C.P. la Grange, F. Hofmann, J. Belnoue, P.R. van Heerden, A. Evans, A.M. Korsunsky. Eigenstrain analysis of non-uniformly shaped shot-peened samples. Procedia Engineering 1 (2009) p.151-154. Link
004. K. Schneider*, Andreas Schöne, T-S. Jun, A.M. Korsunsky. Investigation of changes in crystalline and amorphous structure during deformation of nano-reinforced semi-crystalline polymers by space-resolved synchrotron SAXS and WAXS. Procedia Engineering 1 (2009) p.159-162. Link
003. H. Luckhoo, T-S. Jun, A.M. Korsunsky*. Inverse eigenstrain analysis of residual stresses in friction stir welds. Procedia Engineering 1 (2009) p.213-216. Link
002. Tea-Sung Jun, Shu Yan Zhang, Mina Golshan, Matthew Peel, David Richards, Alexander M. Korsunsky*. Synchrotron energy-dispersive X-ray diffraction analysis of residual strains around friction welds between dissimilar aluminium and nickel alloys. Materials Science Forum 571-572 (2008) p.277-282. Link
001. Tea-Sung Jun, Fabio Rotundo, Lorella Ceschini, Alexander M. Korsunsky*. A study of residual stresses in Al/SiCp linear friction weldment by energy-dispersive neutron diffraction. Key Engineering Materials 385-387 (2008) p.517-520. Link
Page updated
Google Sites
Report abuse