40. Hafiz Muhammad Rehan Tariq, Umer Masood Chaudry, Jeong-Rim Lee, Nooruddin Ansari, Mansoor Ali, Tea-Sung Jun*. Tensile fracture mode transitions from subzero to elevated deformation temperature in Mg-6Al-1Zn alloy. International Journal of Minerals, Metallurgy and Materials 33(1) (2026) p.242-251. Link
39. Umer Masood Chaudry, Hafiz Muhammad Rehan Tariq, Zeeshan Asif, Ameeq Farooq, Asima Tayyeb, Hongbiao Dong, Mansoor Ali*, Tea-Sung Jun*. Influence of CaO alloying on the corrosion resistance and biocompatibility of AZ61 alloy in physiological environments. Journal of Alloys and Compounds 1048 (2025) 185197. Link
38. A. Rajesh Kannan, Hafiz Muhammad Rehan Tariq, Muhammad Ishtiaq, Ha-Seong Baek, Umer Masood Chaudry, Tea-Sung Jun*. Impact of post-annealing treatment on the microstructure, re-crystallization and mechanical behavior of hot-rolled Mg-Al-Zn-Ca alloy. Materials (2025) 18(21) 4897. Link
37. Hafiz Muhammad Rehan Tariq, Umer Masood Chaudry, Zeeshan Asif, Saira Niaz, Ameeq Farooq, HongBiao Dong*, Tea-Sung Jun*. Influence of Al2Ca particles on the corrosion behavior of AZX311 Mg alloy in chloride and sulfate electrolytes under varying conditions. Electrochimica Acta 543 (2025) 147546. Link
36. Hafiz Muhammad Rehan Tariq, Hyun-Hak Kang, Umer Masood Chaudry, Muhammad Kashif Khan, Tea-Sung Jun*. Impact of surface roughness on the yield drop of hot rolled AZX311 Mg alloy. Advanced Engineering Materials 27(9) (2025) 2401689 (Editor’s Choice) Link
35. Umer Masood Chaudry, Ameeq Farooq, Muhammad Sufyan, Hafiz Muhammad Rehan Tariq, Abdul Malik, Minki Kim, Ali Tariq, Kotiba Hamad, Tea-Sung Jun*. Corrosion behavior of AZ31 and AZ31-0.5Ca in different concentrations of NaCl and Na2SO4 at various temperatures. Corrosion 85(3) (2025) p.232-243. Link
34. Hafiz Muhammad Rehan Tariq, Muhammad Ishtiaq, Hyunhak Kang, Umer Masood Chaudry, Tea-Sung Jun*. A critical review on the comparative assessment of rare-earth and non-rare-earth alloying in Magnesium alloys. Metals 15(2) (2025) 128. Link
33. Umer Masood Chaudry, Hafiz Muhammad Rehan Tariq, Kotiba Hamad*, Muhammad Kashif Khan*, Tea-Sung Jun*. Twinning-induced texture weakening in Mg alloy and its consequent influence on ductility and formability. Materials Science and Technology 41(2) (2025) p.101-105. Link
32. Hafiz Muhammad Rehan Tariq, Umer Masood Chaudry, Muhammad Ishtiaq, Minki Kim, Mansoor Ali*, Tea-Sung Jun*. Effect of Al addition on the room and cryogenic temperature deformation of Mg-xAl-1Zn-1Ca alloy (x=1, 2 wt.%). Journal of Magnesium and Alloys 12 (2024) p.4694-4708. Link
31. Umer Masood Chaudry, Yeonju Noh, Jeong-Rim Lee, Si Mo Yeon, Jongcheon Yoon, Hyub Lee, Tea-Sung Jun*. Comparative study of room and cryogenic deformation behavior of additive manufactured Ti-6Al-4V. Advanced Engineering Materials 26(20) (2024) 2470052 (Inside Back Cover Article) Link
30. Umer Masood Chaudry, Seung-Chang Han, Kaab bin Tayyab, Ameeq Farooq, Woo-Sung Kim, Tea-Sung Jun*. Unraveling the anisotropic corrosion behavior along the building direction in laser powder bed fusion processed Hastelloy X. Journal of Materials Research and Technology 33 (2024) p.1188-1200. Link
29. Hafiz Muhammad Rehan Tariq, Umer Masood Chaudry, Joung Sik Suh, Young Min Kim, Tea-Sung Jun*. Effect of cryogenic temperature on the strengthening mechanisms of AZ61 Mg alloy extruded at different temperatures. Journal of Materials Research and Technology 33 (2024) p.335-348. Link
28. Hafiz Muhammad Rehan Tariq, Umer Masood Chaudry, Chung-Soo Kim, Tea-Sung Jun*. Effect of calcium on the rate of grain boundary migration in pure magnesium during annealing. Metal and Materials International 30(7) (2024) p.2038-2043. Link (Front Cover Article)
27. Umer Masood Chaudry, Hafiz Muhammad Rehan Tariq, Nooruddin Ansari, Chung-Soo Kim, Soo Yeol Lee, Tea-Sung Jun*. Room and cryogenic deformation behavior of AZ61 and AZ61-xCaO (x=0.5, 1 wt.%) alloy. Journal of Magnesium and Alloys 12 (2024) p.1996-2009. Link
26. Hafiz Muhammad Rehan Tariq, Umer Masood Chaudry, Chung-Soo Kim, Tea-Sung Jun*. Synergetic improvement in strength and ductility of AZX211 Mg alloy facilitated by {10-12}-{01-12} twin-twin interactions during pre-stretching at cryogenic temperature. Journal of Materials Research and Technology 29 (2024) p.3249-3254. Link
25. Umer Masood Chaudry, Hafiz Muhammad Rehan Tariq, Muhammad Zubair, Nooruddin Ansari, Tea-Sung Jun*. Implications of twinning on the microstructure development, crystallographic texture and mechanical performance of Mg alloy- a critical review. Journal of Magnesium and Alloys 11 (2023) 4146-4165. Link
24. Umer Masood Chaudry Hafiz Muhammad Rehan Tariq, Nooruddin Ansari, Adil Mansoor, Muhammad Kashif Khan*, Kotiba Hamad*, Tea-Sung Jun*. Effect of CaO content and homogenization treatment on the room temperature mechanical properties of AZ61 and AZ61-CaO alloys. Metals 13(12) (2023) 1962. Link
23. Umer Masood Chaudry, Min-Su Lee, Tea-Sung Jun*. Dynamic recrystallization of commercially pure titanium during cryogenic compression. Materials Characterization 206 (2023) 113423. Link
22. Umer Masood Chaudry, Hafiz Muhammad Rehan Tariq, Nooruddin Ansari, Chung-Soo Kim, Soo Yeol Lee, Tea-Sung Jun*. Exceptional improvement in the yield strength of AZ61 magnesium alloy via cryo-stretching and its implications on the grain growth during annealing. Journal of Alloys and Compounds 970 (2024) 172630. Link
21. Yeonju Noh, Min-Su Lee, Umer Masood Chaudry, Tea-Sung Jun*. Effect of strain rate on the deformation of 6061-T6 aluminum alloy at cryogenic temperature. Materials Characterization 206 (2023) 113403. Link
20. Yasir Zulfiqar, Asim Zulfiqar, Hafiz Waqar Ahmad, Umer Masood Chaudry*, Muhammad Kashif Khan, Tea-Sung Jun*. Detailed Structural Analysis of Cylindrical Steel Tank Subjected to Various Seismic Peak Ground Values Using FSI Approach. Applied Mechanics 4(3) (2023) p.990-1014. Link
19. Ameeq Farooq, Ahsan Saleem, Kaab bin Tayyab, Umer Masood Chaudry*, Tea-Sung Jun*. Effect of micro-arc oxidation voltage on the morphology and electrochemical properties of AZ31B magnesium alloy. Modern Concepts in Materials Science 5(2) (2023) p.1-8. Link
18. Seung-Chang Han, Umer Masood Chaudry, Hafiz Muhammad Rehan Tariq, Tea-Sung Jun*. Mitigating HAZ softening after post weld heat treatment of friction stir welded ferrite-martensite DP steels followed by cryogenic quenching. Materials Letters 349 (2023) 134881. Link
17. Seung-Chang Han, Umer Masood Chaudry, Sandra Bernardo Cenalmor, Si Mo Yeon, Jongcheon Yoon, Hyub Lee, Kyeongtae Kim, Tea-Sung Jun*. Effect of heat treatment on corrosion and mechanical properties of M789 alloy fabricated using DED. Metals 13 (2023) 1214. Link
16. Umer Masood Chaudry, Gukin Han, Yeonju Noh, Tea-Sung Jun*. Effect of Ca alloying and cryogenic temperature on the slip transmission across the grain boundary in pure Mg. Journal of Alloys and Compounds 950 (2023) 169828 . Link
15. Umer Masood Chaudry, Seung-Chang Han, Tea-Sung Jun*. Effect of welding speed on the microstructure and texture development in the individual weld zone of friction stir welded DP780 steel. Journal of Materials Research and Technology 23 (2023) p.4976-4989. Link
14. Sheraz Ahmed, Wajahat Waheed Kazmi, Farah Nemat Butt, Muhammad Irshad, Farooq Sher, Syed Mohsin Ali Kazmi, Umer Masood Chaudry, Hassan Zeb, Tea-Sung Jun*, Muhammad Kashif Khan*. Fabrication of nanocage structured based electrocayalyst for oxygen evolution reactions. Materials Letters 331 (2023) 133416. Link
13. Yasir Zulfigar, M. Javed Hyder, Ahmad Jehanzeb, Hafiz Waqar Ahmad, Asim Zulfigar, Umer Masood Chaudry*, Tea-Sung Jun*. Numerical investigation for optimum ring baffle design to optimize tank structural strength subjected to resonant seismic sloshing. Structural Engineering International 33(2) (2023) p.350-360. Link
12. U.M. Chaudry, A. Farooq, M. Nabeel, M. Sufyan, A. Tayyeb, Sumbal Asif, A. Inam, Tea-Sung Jun*, K. Hamad*. Biodegradable properties of AZ31-0.5Ca magnesium alloy. Materials Technology 37(12) (2022) 2230-2241. Link
11. Umer Masood Chaudry, Kotiba Hamad*, Tea-Sung Jun*. Investigating the microstructure, crystallographic texture and mechanical behavior of pure Mg and Mg-2Al-1Zn-1Ca alloy. Crystals 12 (2022) 1330. Link
10. Seung-Chang Han, Umer Masood Chaudry, Jin-Young Yoon, Tea-Sung Jun*. Investigating local strain rate sensitivity of the individual weld zone in the friction stir welded DP 780 steel. Journal of Materials Research and Technology 20 (2022) p.508-515. Link
09. Umer Masood Chaudry, Yeonju Noh, Kotiba Hamad*, Tea-Sung Jun*. Effect of deformation temperature on the slip activity in pure Mg and AZX211. Journal of Materials Research and Technology 19 (2022) p.3406-3420. Link
08. Javed A.K. Tipu, Usman Rafiq, Muhammad Arif, Tariq Feroze, Hafiz Waqar, Umer Masood Chaudry*, Tea-Sung Jun*, Adnan Aslam Noon*. Development of multiscale composite with hybrid natural nanofibers. Materials 15 (2022) 4622. Link
07. Umer Masood Chaudry, Yeonju Noh, Gukin Han, Russlan Jaafreh, Tea-Sung Jun*, Kotiba Hamad*. Effect of CaO on structure and properties of AZ61 magnesium alloy. Materials Science and Engineering A 844 (2022) 143189 . Link
06. Umer Masood Chaudry, Ameeq Farooq, Kaab bin Tayyab, Abdul Malik, Muhammad Kamran, Jung-Gu Kim*, Chuan Li, Kotiba Hamad*, Tea-Sung Jun*. Corrosion behaviour of AZ31 magnesium with calcium addition. Corrosion Science 199 (2022) 110205. Link
05. Umer Masood Chaudry, Russlan Jaafreh, Abdul Malik, Tea-Sung Jun*, Kotiba Hamad*, Tamer Abuhmed*. A comparative study of strain rate constitutive and machine learning models for flow behavior of AZ31-0.5Ca Mg alloy during hot deformation. Mathematics 10 (2022) 766. Link
04. Abdul Malik, Umer Masood Chaudry, Kotiba Hamad*, Tea-Sung Jun*. Microstructure features and superplasticity of extruded, rolled and SPD-processed magnesium alloys: A short review. Metals 11 (2021) 1766. Link
03. Gukin Han, Yeonju Noh, Umer Masood Chaudry, Sung Hyuk Park, Kotiba Hamad, Tea-Sung Jun*. {10-12} extension twinning activity and compression behavior of pure Mg and Mg-0.5Ca alloy at cryogenic temperature. Materials Science and Engineering A 831 (2022) 142189. Link
02. Umer Masood Chaudry, Sravya Tekumalla, Manoj Gupta*, Tea-Sung Jun*, Kotiba Hamad*. Designing highly ductile magnesium alloys: Current status and future challenges. Critical reviews in Solid state and Materials science 47(2) (2021) 194-281 . Link
01. Umer Masood Chaudry, Seung-Chang Han, Fathia Alkelae, Tea-Sung Jun*. Effect of PWHT on the microstructure and mechanical performance of FSW DP780 steel. Metals 11(7) (2021) 1097. Link
11. “Twinning Induced Strengthening in Mg Alloy and Its Implications on The Grain Growth Kinetics”, U.M. Chaudry, H.M.R. Tariq, C.S. Kim, T-S. Jun, KSME Annual Meeting 2023, Incheon, Korea, Nov. 1-4, 2023
10. “On the twin-induced dynamic recrystallization of CP-Ti under room and cryogenic compression”, U.M. Chaudry, M.S. Lee, T-S. Jun, Ti-2023, Edinburgh, UK, Jun. 12-16, 2023
09. “Unveiling the dynamic recrystallization mechanisms of commercially pure titanium during cryocompression”, U.M. Chaudry, T-S. Jun, KIM Spring Meeting, Jeju, Korea, Apr. 26-28, 2023
08. “Investigating the microstructure and local mechanical behavior of FSW DP 780 steel”, U.M. Chaudry, S.C. Han, J.Y. Yoon, T-S. Jun, IWJC2022 Jeju, Korea, Oct. 4-7, 2022
07. “Effect of calcium on the corrosion behavior of AZ31 Mg alloy”, U.M. Chaudry, M.S. Lee, T-S. Jun, I-COST2022, Ho Chi Minh City, Vietnam, Sep. 23-24, 2022
06. “Investigating the activation of deformation modes in pure magnesium and multicomponent magnesium alloy at various temperature regimes”, U.M. Chaudry, Y.J. Noh, K. Hamad, T-S. Jun, ESMC2022, Galway, Ireland, Jul. 4-8, 2022
05. “Room and cryogenic temperature properties of AZ61-xCaO magnesium alloy”, U.M. Chaudry, T-S. Jun, 2022 KIM Spring Meeting, Changwon, Korea, Apr. 27-29, 2022
04. “Effect of FSW parameters on the microstructure and mechanical properties of DP780 steel”, U.M. Chaudry, S.C. Han, T-S. Jun, 2021 KWJS Fall Meeting, Seoul, Korea, Nov. 11-12, 2021
03. “Effect of pre-twinning on microstructure and texture evolution of Ca containing Mg alloy”, U.M. Chaudry, Y.J. Noh, G.I. Han, K. Hamad, T-S. Jun, ICEAM2021, Virtual Conference, Nov 2, 2021 (Best Presenter Award)
02. “Activation of prismatic slip system in multicomponent Mg alloy”, U.M. Chaudry, T-S. Jun, 2021 KIM Fall Meeting, Jeju, Korea, Oct. 20-22, 2021
01. “Enhancing the room-temperature formability of AZ31-0.5Ca magnesium alloy by a cost-effective technique”, U.M. Chaudry, T-S. Jun, 2021 KIM Fall Meeting, Jeju, Korea, Oct. 20-22, 2021
2021 ICEAM Conference (Oral)