[논문]천무민, 심성준, 김주영, 권용진, A Multi-Agent Reinforcement Learning-Based Positioning Control Algorithm for Line-of-Sight Communication Relaying in Micro-Robot Swarms, Journal of the Korea Institute of Military Science and Technology (08월, 2026)

[논문]장근철, 권용진, From Manned to Unmanned Helicopters: A Transformer-Driven Cross-Scale Transfer Learning Framework for Vibration-Based Anomaly Detection, MDPI Actuators, Vol.15, No.1, p.38 (01월, 2026)

[논문]조대일, 권용진, Generation of Critical Information and Sharing Mechanism for Multi-Robot Mission Success, IEEE Access, Vol.13, pp.146855-146873 (08월, 2025)

[논문]안효준, 김세진, 백은서, 신민규, 김주영, 심성준, 권용진, Reinforcement Learning Based Communication Relay for Small Indoor Robots, INTERNATIONAL JOURNAL OF MODELING AND OPTIMIZATION, pp.88- pp.93 (06월, 2024)

[논문]이경윤, 조대일, 권용진, Vision-Based Structural Health Monitoring System Using Edge Computing Device, INTERNATIONAL JOURNAL OF MODELING AND OPTIMIZATION, pp.76- pp.80 (05월, 2024)

[논문]조대일, Paul Oh, 이현웅, 장유림, 권용진, The Development of a New Vagus Nerve Simulation Electroceutical to Improve the Signal Attenuation in a Living Implant Environment, MDPI SENSORS, pp.3172- pp.3195 (05월, 2024)

[논문]신민규, 김세진, 백은서, 변선오, 안효준, 김주영, 심성준, 권용진, Designing a Simulator Structure for Validating Swarm Robot’s Dynamic Mission Planning, INTERNATIONAL JOURNAL OF MODELING AND OPTIMIZATION, pp.24- pp.31 (02월, 2024)

[논문]이세담, 고은성, 권용진, UAV Pilot Status Identification Algorithm UsingImage Recognition and Biosignals, Journal of Advances in Information Technology, pp.477- pp.485 (10월, 2022)

[논문]이세담, 김주영, 허진영, 권용진, GCS Interface Mission Load Reduction Design through Pilot Gaze Point Analysis, International Journal of Mechanical Engineering and Robotics Research, pp.710- pp.717 (09월, 2022)

[논문]이세담, 조대일, 권용진, Camera-Based Automatic Landing of Drones Using Artificial Intelligence Image Recognition, International Journal of Mechanical Engineering and Robotics Research, pp.357- pp.364 (05월, 2022)

[논문]허진영, 권용진, 3D Vehicle Trajectory Extraction Using DCNN in an Overlapping, Multi-camera Crossroad Scene, SENSORS, pp.7879- pp.7879 (11월, 2021)

[논문]이세담, 권용진, Safe Landing of Drone Using AI-based Obstacle Avoidance, INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND ROBOTICS RESEARCH, pp.1495- pp.1501 (11월, 2020)

[논문]이세담, 권용진, Development of drone cargo bay with real-time temperature control, WORLD JOURNAL OF ENGINEERING AND TECHNOLOGY, pp.612- pp.621 (11월, 2019)

[논문]조대일, 권용진, Vertical Takeoff and Landing Wing Developed for Long Distance Flight and Stable Transit Flight, INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND ROBOTICS RESEARCH, pp.797- pp.802 (09월, 2019)

[논문]조대일, 권용진, Development of Autonomous VTOL UAV for Wide Area Surveillance, WORLD JOURNAL OF ENGINEERING AND TECHNOLOGY, pp.227- pp.239 (02월, 2019)

[논문]임성준, 허진영, 김홍철, 권용진, Technical Analysis of Exoskeleton Robot, WORLD JOURNAL OF ENGINEERING AND TECHNOLOGY, Vol.7, No.1, pp.68- pp.79 (02월, 2019)

[논문]허진영, 김정훈, 권용진, Remote Operation SW for USV: Part I.Integrated Mission Planning System, WORLD JOURNAL OF ENGINEERING AND TECHNOLOGY, pp.806- pp.815 (11월, 2018)

[논문]허진영, 황근철, 권용진, Remote Operation SW for USV: Part II.Simulation Development, WORLD JOURNAL OF ENGINEERING AND TECHNOLOGY, pp.816- pp.824 (09월, 2018)

[논문]손우진, 권용진, 박상철, 이성주, Using a design structure matrix to support technology roadmapping for product?service systems, TECHNOLOGY ANALYSIS & STRATEGIC MANAGEMENT, pp.337- pp.350 (03월, 2018)

[논문]조대일, 권용진, Development of Rescue Material Transport UAV (Unmanned Aerial Vehicle), WORLD JOURNAL OF ENGINEERING AND TECHNOLOGY, Vol.5, No.4, pp.720- pp.729 (11월, 2017)

[논문]조대일, 권용진, Development of Jet Training FTD (Flight Training Device) Overhead System, WORLD JOURNAL OF ENGINEERING AND TECHNOLOGY, Vol.5, No.4, pp.707- pp.719 (11월, 2017)

[논문]김식, 권용진, Unified Platform for AI and Big Data Analytics, JOURNAL OF COMPUTER AND COMMUNICATIONS, Vol.5, No.8, pp.1- pp.8 (06월, 2017)

[논문]허진영, 김정훈, 권용진, Analysis of Design Directions for Unmanned Surface Vehicles (USVs), JOURNAL OF COMPUTER AND COMMUNICATIONS, Vol.5, No.7, pp.92- pp.100 (05월, 2017)

[논문]허진영, 유용준, 권용진, Case Analysis for USV Integrated Mission Planning System, JOURNAL OF COMPUTER AND COMMUNICATIONS, Vol.5, No.7, pp.83- pp.91 (05월, 2017)

[논문]조대일, 권용진, Analysis of VTOL UAV Propellant Technology, JOURNAL OF COMPUTER AND COMMUNICATIONS, Vol.5, No.7, pp.76- pp.82 (05월, 2017)

[논문]유승희, 권용진, Development of Multi-Purpose, Variable, Light Aircraft Simulator, JOURNAL OF COMPUTER AND COMMUNICATIONS, Vol.5, No.7, pp.44- pp.52 (05월, 2017)

[논문]유승희, 권용진, Development of VTOL Drone for Stable Transit Flight, JOURNAL OF COMPUTER AND COMMUNICATIONS, Vol.5, No.7, pp.36- pp.43 (05월, 2017)

[논문]허진영, 김정훈, 권용진, Technology Development of Unmanned Underwater Vehicles (UUVs), JOURNAL OF COMPUTER AND COMMUNICATIONS, Vol.2, No.7, pp.28- pp.35 (05월, 2017)

[논문]정세경, 이성주, 권용진, Automatic Synthesis of UAV Flight Information to Reduce the Ground Operator's Workload, INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH, pp. 11775- pp.11785 (12월, 2016)

[논문]Bill Tseng, 이성주, Johnny Ho, 권용진, Analysis of Complex PCB Design Data Using Data Mining Approach to Better Estimate the Work Hours, INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH, pp.11700- pp.11711 (12월, 2016)

[논문]정세경, 유승희, 이성주, 허진영, 권용진, Operation of UAV in the Helicopter Simulator to Compare the Control Interface Methods (Experiment II), INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH, Vol.11, No.16, pp.9111- pp.9115 (08월, 2016)

[논문]정세경, 유승희, 이성주, 허진영, 권용진, Operation of UAV in the Helicopter Simulator to Assess the Mission Task Load (Experiment I), INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH, Vol.11, No.16, pp.8908- pp.8915 (08월, 2016)

[논문]Maria, 이성주, Bill Tseng, 권용진, Statistical Design Approach to Maximize the Printed Cells in Bio Printing Process, INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH, Vol.11, No.16, pp.8900- pp.8907 (08월, 2016)

[논문]유승희, 정세경, 허진영, 권용진, Technical Analysis of VTOL UAV, JOURNAL OF COMPUTER AND COMMUNICATIONS, Vol.4, pp.92- pp.97 (05월, 2016)

[논문]권용진, 유승희, 정세경, 허진영, 김수환, Analysis of Design Directions for Ground Control Station (GCS), JOURNAL OF COMPUTER AND COMMUNICATIONS, Vol.4, pp.1- pp.7 (05월, 2016)

[논문]이응현, 김수환, 권용진, Analysis of Interface and Screen for Ground Control System, JOURNAL OF COMPUTER AND COMMUNICATIONS, pp.61- pp.66 (05월, 2016)

[논문]정희수, 김수환, 권용진, User Centered Design for Battlefield Screen, JOURNAL OF COMPUTER AND COMMUNICATIONS, pp.87- pp.92 (05월, 2016)

[논문]정희수, 김수환, 권용진, Information Visualization Theorem for Battlefield Screen, JOURNAL OF COMPUTER AND COMMUNICATIONS, pp.73- pp.78 (05월, 2016)

[논문]백승주, 이응현, 김수환, 권용진, Analysis of Design Approach for Navy Weapon System Operation Environment, JOURNAL OF COMPUTER AND COMMUNICATIONS, Vol.4, pp.93- pp.98 (05월, 2016)

[논문]허진영, 김수환, 권용진, Design of Ground Control Station for Operation of Multiple Combat Entities, JOURNAL OF COMPUTER AND COMMUNICATIONS, pp.67- pp.72 (05월, 2016)

[논문]Bill Tseng, Hu, Reddy, 권용진, E-Quality Control: A Support Vector Machines Approach, JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING, pp.91- pp.101 (04월, 2016)

[논문]홍정완, 백승주, 정희수, 김수환, 권용진, Usability Analysis of Touch Screen for Ground Operators, JOURNAL OF COMPUTER AND COMMUNICATIONS, Vol.3, No.11, pp.133- pp.139 (11월, 2015)

[논문]홍정완, 김수환, 권용진, Analysis of Modern Design Approach for Anti-Air Radar Screen, JOURNAL OF COMPUTER AND COMMUNICATIONS, Vol.3, No.11, pp.140- pp.145 (11월, 2015)

[논문]이응현, 김수환, 권용진, Analysis of Mission Task Loading based on the External Disturbance, JOURNAL OF COMPUTER AND COMMUNICATIONS, Vol.3, No.11, pp.92- pp.98 (11월, 2015)

[논문]이응현, 김수환, 권용진, Optimal Mission Task Assignment for Complex Military Simulator Operations, JOURNAL OF COMPUTER AND COMMUNICATIONS, Vol.3, No.11, pp.85- pp.91 (11월, 2015)

[논문]권용진, Enhancement of Process Capability for the Vision-Guided Robot, JOURNAL OF COMPUTER AND COMMUNICATIONS, Vol.3, No.11, pp.78- pp.84 (11월, 2015)

[논문]홍정완, 권용진, Application of Informatics for the Enhanced Management of Robotic Operations, JOURNAL OF COMPUTER AND COMMUNICATIONS, Vol.3, No.11, pp.71- pp.77 (11월, 2015)

[논문]Tseng B., Koppella K., 권용진, Critical parts retrieval and profit maximization for medical sustainability using design for disassembly and modularity, INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH, Vol.10, No.20, pp.41431- pp.41443 (11월, 2015)

[논문]이응현, 권용진, Development of an Expanded Arduino Interface Board PCB Module for Large Commercial Jet Simulator, International Journal of Mechanical Engineering and Robotics Research, Vol.4, No.4, pp.309- pp.313 (10월, 2015)

[논문]홍정완, Chiou R., 권용진, Information Visualization of Networked Assembly Robots, International Journal of Mechanical Engineering and Robotics Research, Vol.4, No.4, pp.331- pp.335 (10월, 2015)

[논문]Chiou R., 권용진, Mauk M., Tseng B., Experimental study of high speed CNC machining quality by noncontact surface roughness monitoring, International Journal of Mechanical Engineering and Robotics Research , Vol.4, No.4, pp.282- pp.286 (10월, 2015)

[논문]고영훈, 권용진, Placement Accuracy Enhancement for the Vision-Guided Robot, INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH, Vol.10, No.13, pp.33595- pp.33597 (08월, 2015)

[논문]홍정완, 권용진, Quality Informatics for the Enhanced Visibility of Networked Robotic Operations, INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH, Vol.10, No.13, pp.33592- pp.33594 (08월, 2015)

[논문]Bill Tseng, Jiang F, 권용진, Hybrid Type II Fuzzy System & Data Mining Approach for Surface Finish, JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING, Vol.2, No.3, pp.137- pp.147 (07월, 2015)

[논문]Tseng B., Konada U., 권용진, A novel approach to predict surface roughness in machining operations using fuzzy set theory, JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING, Vol.3, No.1, pp.1- pp.13 (05월, 2015)

[논문]Bill Tseng, Carlos A. Garcia Rosales, 권용진, OPTIMIZATION OF WIND TURBINE PLACEMENT LAYOUT ON NON-FLAT TERRAINS, INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING-THEORY APPLICATIONS AND PRACTICE, Vol.21, No.6, pp.384- pp.395 (12월, 2014)

[논문]함원경, 권용진, 박상철, COMBAT SIMULATION FRAMEWORK INCLUDING CONTINUOUS DETECTION SYSTEM, INTERNATIONAL JOURNAL OF SIMULATION MODELLING, Vol.13, No.4, pp.395- pp.408 (12월, 2014)

[논문]권용진, 홍정완, Integrated remote control of the process capability and the accuracy of vision calibration, ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, Vol.30, No.5, pp.451- pp.459 (10월, 2014)

[논문]Tzu-Liang (Bill) Tseng, 박상철, Aditya Chilukuri, 권용진, Automated Quality Characterization of 3D Printed Bone Scaffolds, JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING, Vol.1, No.3, pp.194- pp.201 (07월, 2014)

[논문]Tzu-Liang (Bill) Tseng , 권용진, Characterization of Machining Quality Attributes Based on Spindle Probe, Coordinate Measuring Machine, and Surface Roughness Data, JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING, Vol.1, No.2, pp.128- pp.139 (04월, 2014)

[논문]박상철, 안의국, 권용진, AUTOMATED METHODOLOGY FOR SCENARIO GENERATION AND ITS FEASIBILITY TESTING, INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING-THEORY APPLICATIONS AND PRACTICE, Vol.20, No.3-4, pp.252- pp.261 (08월, 2013)

[논문]권용진, 박용민, Improvement of Vision Guided Robotic Accuracy Using Kalman Filter, COMPUTERS & INDUSTRIAL ENGINEERING, Vol.65, No.1, pp.148- pp.155 (05월, 2013)

[논문]Leonard Stepanskiy , 권용진, Bayesian Modeling of the Risk of Non-repeatability for the Networked Robotic System, COMPUTERS & INDUSTRIAL ENGINEERING, pp.739- pp.747 (02월, 2013)

[논문]이응현, 고영훈, 박상철, 이진우, 홍정완, 이미선, 이종훈, 권용진, Analysis of Uncontrollable Variables to the Performance of Predefined Tasks, Journal of Software Engineering and Applications, pp.140- pp.143 (12월, 2012)

[논문]Bill Tseng, Prashanth Devaram, 권용진, E-quality: Using dimensional index values for improving classification accuracy, CONCURRENT ENGINEERING-RESEARCH AND APPLICATIONS, pp.43- pp.53 (03월, 2012)

[논문]권용진, 박용민, Simin Huang, Enhancing e-quality for manufacture using Kalman filter calibrated visual robotic control, ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, Vol.27, No.5, pp.902- pp.909 (10월, 2011)

[논문]Richard Chiou, 권용진, Remotely Adjustable Robotic Grip Force for the Network-based Assembly Automation, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, pp.1145- pp.1154 (06월, 2011)

[논문]Richard Chiou, 권용진, Robin Kizirian, Design and Implementation of 3D Digital Visualization Technologies for E-Lab Learning, Computers in Education Journal, pp.35- pp.44 (01월, 2011)

[논문]Richard Chiou, 권용진, Bill Tseng, Robin Kizirian , Yueh-Ting Yang, Real-time Stereoscopic 3D for E-Robotics Learning, Journal of Systemics, Cybernetics, and Informatics, pp.8- pp.13 (01월, 2011)

[논문]Stepanskiy, L., 권용진, Modeling of robot availability for the network-controllable production system, CONCURRENT ENGINEERING-RESEARCH AND APPLICATIONS, pp.303- pp.310 (12월, 2010)

[논문]권용진, 성길영, 변재정, 박상철, Simulation framework for small scale engagement, COMPUTERS & INDUSTRIAL ENGINEERING, Vol.59, pp.463- pp.472 (07월, 2010)

[논문]박상철, 박용민, 홍정완, 권용진, Sensor-based remote quality control applications in automotive components assembly, CONCURRENT ENGINEERING-RESEARCH AND APPLICATIONS, Vol.18, No.2, pp.141- pp.155 (06월, 2010)

[논문]Richard Chiou, 권용진, Robin Kizirian , Tzu-Liang (Bill) Tseng, Yueh-Ting Yang, Enhancement of online robotics learning using real-time 3D visualization technology, Journal of Systemics, Cybernetics, and Informatics, pp.46- pp.51 (03월, 2010)

[논문]권용진, Chiou, R., Automated vision inspection in network-based production environment, International Journal of Advanced Manufacturing Technology, Vol.45, No.1-2, pp.81- pp.90 (11월, 2009)

[논문]Chiou, R., 권용진, Network-based remote closed-loop force control using LabVIEW, Computers in Education Journal , pp.2- pp.11 (10월, 2009)

[논문]Chiou, R., 권용진, Mookiah, P., Manufacturing e-quality through integrated web-enabled computer vision and robotics, International Journal of Advanced Manufacturing Technology, Vol.43, No.7-8, pp.720- pp.730 (08월, 2009)

[논문]권용진, Chiou, R, Stephanskiy, L., Remote, condition-based maintenance for web-enabled robotic system, Robotics and Computer-Integrated Manufacturing, Vol.25, No.3, pp.552- pp.559 (06월, 2009)

[논문]Chiou. Y, 권용진, Internet-controllable vortex tube experiments for thermodynamics laboratory class, ASEE, Vol.18, No.4, pp.2- pp.8 (12월, 2008)

[논문]권용진, Web-enabled vision guided robotic tracking within the framework of E-Manufacturing, Journal of Industrial Engineering ;Theory Applications and Practice, Vol.15, No.3, pp.323- pp.329 (09월, 2008)

[논문]Chiou, 권용진, Tseng, Java programming for online quality control laboratory integrated with remote robot, Computers in Education Journal, Vol.XVIII, No.3, pp.42- pp.54 (07월, 2008)

[논문]권용진, 왕지남, Olufemi A. Omitaomu, Data mining approaches for modeling complex electronic circuit design activities, Computers & industrial engineering, Vol.54, No.2, pp.229- pp.241 (03월, 2008)

[논문]H Choi, 권용진, MK Jeong, Support vector data description for calibration monitoring for remotely located microrobotic system, Journal of Manufacturing Systems, Vol.25, No.3, pp.196- pp.208 (12월, 2007)

[논문]권용진, S Rauniar, E-Quality for manufacturing (EQM) within the framework of Internet-based systems, IEEE Transactions on Systems, Man, and Cybernetics--Part C: Applications and Reviews, Vol.37, No.6, pp.1365- pp.1372 (11월, 2007)

[논문]권용진, Teresa Wu, Cognitive understanding of remote systems from the perspectives of online laboratory learning, Computers in Education Journal, Vol.XVII, No.3, pp.93- pp.105 (07월, 2007)

[논문]Richard Chiou, 권용진, Horacio Sosa, Shreepud Rauniar, Visual basic programming for Internet-based robotic control, Computers in Education Journal, Vol.XVII, No.2, pp.81- pp.89 (04월, 2007)

[논문]권용진, Ertekin Y, Tseng B, Characterization of closed-loop measurement accuracy in precision CNC milling, Journal of Robotics & Computer Integrated Manufacturing, Vol.22, No.4, pp.288- pp.296 (08월, 2006)

[논문]권용진, Chiou R, Rauniar S, Sosa H, Positioning accuracy characterization of precision microrobot over the Internet, Journal of Advanced Manufacturing Systems, Vol.5, No.1, pp.45- pp.57 (06월, 2006)

[논문]권용진, Jeong M, Omitaomu O, Adaptive support vector regression analysis of closed-loop inspection accuracy, Journal of Machine Tools and Manufacture, Vol.46, No.6, pp.603- pp.610 (05월, 2006)

[논문]권용진, Chiou R, S Rauniar, Sosa H, Remote control of quality using Ethernet vision & web-enabled robotic system, Journal of Concurrent Engineering: Research and Applications, Vol.14, No.1, pp.35- pp.42 (03월, 2006)

[논문]Tseng B, 권용진, Ertekin Y, Feature-based rule induction in machining operation using rough set theory for quality assurance, Journal of Robotics & Computer Integrated Manufacturing, Vol.21, No.6, pp.559- pp.567 (12월, 2005)

[논문]권용진, Teresa Wu, Real-time machining quality inspection for design for manufacturing (DFM), Journal of Advanced Manufacturing Systems, Vol.4, No.1, pp.21- pp.36 (06월, 2005)

[논문]권용진, Ertekin Y, Tseng B, In-process & post-process quantification of machining accuracy in circular CNC milling, Journal of Machining Science and Technology, Vol.9, No.1, pp.27- pp.38 (03월, 2005)

[논문]권용진, Ochoa J, Teresa Wu, SMWA: A CAD-based decision support system for the efficient design of welding, Journal of Concurrent Engineering: Research & Applications, Vol.12, No.4, pp.295- pp.304 (12월, 2004)

[논문]권용진, Ertekin Y, Tseng B, Characterization of tool wear measurement with relation to the surface roughness in turning, Journal of Machining Science and Technology, Vol.8, No.1, pp.39- pp.51 (12월, 2004)

[논문]Tom Schnell, 권용진, Etheringtn T, Merchant S, Improved flight technical performance in flight decks equipped with synthetic vision information system displays, Journal of Aviation Psychology, Vol.14, No.1, pp.79- pp.102 (03월, 2004)

[논문]Yalcin Ertekin, Bill Tseng, 권용진, Identification of common sensory features for the control of CNC milling operations under varying cutting conditions, International Journal of Machine Tools and Manufacture, Vol.43, pp.897- pp.904 (07월, 2003)

[논문]권용진, Gary Fischer, A novel approach to quantifying tool wear & tool life measurements for optimal tool management, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, pp.359- pp.368 (03월, 2003)

[논문]권용진, Bill Tseng, Gary Fischer, Fuzzy neuron adaptive modeling to predict surface roughness under process variations in CNC turning, JOURNAL OF MANUFACTURING SYSTEMS, Vol.21, No.6, pp.440- pp.450 (10월, 2002)

[논문]허진영, 김주영, 김현석, 심성준, 유재관, 권용진, 국제해상충돌예방규칙에 따른 군집 무인수상정의 편대 제어 알고리즘 연구, 한국군사과학기술학회지, pp.586- pp.595 (12월, 2022)

[논문]허진영, 유재관, 이준식, 하지수, 권용진, 무인수상정 경로점 추종을 위한 강화학습 기반 Dynamic Window Approach, 군사과학기술학회지, pp.61- pp.69 (02월, 2021)

[논문]고영훈, 박상철, 임병윤, 권용진, 전투 개체간의 정보 공유가 가능한 모델링 및 시뮬레이션 사례 분석 , 한국군사과학기술학회지, Vol.17, No.4, pp.395- pp.403 (08월, 2014)

[논문]홍정완, 박상철, 권용진, 한국형 미래전투체계 효과도 분석을 위한 회전익 무장체계 시뮬레이션, 한국군사과학기술학회지, Vol.16, No.4, pp.501- pp.506 (08월, 2013)

[논문]안의국, 권용진, 장대순, 변재정, 박상철, 소규모 교전에서의 적시 대응 시나리오 개발 방안 연구, 한국시뮬레이션학회논문지, Vol.22, No.2, pp.63- pp.71 (06월, 2013)

[논문]박효진, 박상철, 이민우, 이진우, 이종훈, 권용진, 무장헬기 임무절차 수립 및 임무하중 분석 연구, 한국시뮬레이션학회논문지, pp.25- pp.33 (12월, 2012)

[논문]홍정완, 권용진, 박상철, 박용민, 수중대잠전 교전모델의 무기체계 효과도 분석을 위한 합성환경기반 가상시험 프레임워크 설계 기술, 한국시뮬레이션학회논문지, pp.291- pp.299 (12월, 2010)