Postgraduate Research Discussion and Supervision
Supervisions
BSc.
1. Vian Qurbani Hamad, Ibrahim Abubakr Mohammed & Mahmud Hassan Mahmud (University of Raparin)—(Analysis and Design of Multi-Story Building of Engineering College—UOR) (2019-2020).
2. Sewa Saadi Ibrahim, Shiba Muhammad Hamadamin & Lina Ahmad Hassan (University of Raparin)—(Analysis and Design of Multi-Storey Residential Building) (2020-2021).
3. Hogr Zainaddeen Hassan, Rozhan Mahmood Hassan, Rawezh Tariq Mahmood & Taws Mohammad Khalid (University of Raparin)—(Analysis and Design of RC Building to Resist Gravity and Earthquake Loads in Ranya, Iraq) (2021-2022).
4. Rasan Ramadhan Mohammad & Darawan Abdulkarim Sabir (Tishk International University)—(Influence of Coarse Glass Aggregate on Mechanical Properties of Concrete with Polypropylene Fiber) (2021-2022).
5. Sarchil Faisal Khidir, Ahmed Salman Kareem, Brusk Sasan Ahmed & Ibrahim Zahir Khalid (Tishk International University)—(Impact of Adding Steel Dust Waste on Mechanical Behaviour of Concrete) (2021-2022).
6. Ali Huner Dheyaaldin, Mustafa Esmail Hassan & Kawyan Kawa Omar (Tishk International University)—(Performance of Different Percentages of Crushed and Uncrushed Aggregate on Fiber Reinforced Concrete) (2021-2022).
7. Ahmed Anwar Othman, Paivin Burhan Rahim, Awin Awat Ali & Qadir Hassan Qadir (University of Raparin)—(Mechanical Properties of Structural Concrete Partially Replacement of Natural Aggregates with Crushed Rock Aggregates) (2022-2023).
8. Kanar R. Azeez, Bafreen M. Majeed, Zainab S. Mohammed & Zheela O. Anwer (Tishk International University)—(Simultaneous Seismic and Gravity Load Analysis and Design of a Multi-Story Building Located in Erbil, Iraq) (2022-2023).
9. Sahan Dlshad Omar, Barham Hussein Faqi Wsw, Rawand Ibrahim Abdulla, Biryar Mohamad Khdir & Sivar Qadir Rasul (University of Raparin)—Analysis and Design of Multistory Building (Full Hand Calculation) (2023-2024).
10. Aram Sami, Hana Khalid & Shkar Mohammed (Tishk International University)—(Simultaneous Seismic and Gravity Load Analysis and Design of a Multi-Story Building) (2023-2024).
11. Mariwan Muzafar Farhad, Blend Abdulkareem Hamadamin & Yousif Mohammed Mohammedamin (Tishk International University)—(Rational Relationship of Concrete Compressive Strength and Steel Reinforcement for RC Building) (2023-2024).
12. Tara Nahro Shafeeq (Tishk International University)—(Design of a Reinforced Concrete Deck-Girder Bridge Using AASHTO and ACI Codes, with Working Stress and Ultimate Strength Design Methods) (2024-2025).
13. Ahmed Sabah Mahmood & Mohammed Firas Hussam (Tishk International University)—(Analysis and Design of a Multi-Story Reinforced Concrete Building with a Fully Inclined Façade). (2025-2026)
MSc.
1. Aram Othman Mahmood (University of Tabriz-Iran)- (Geometry and Stress Control of Spherical Structure by Direct Force Method) (2020-2021) (Graduated).
2. Araz Ali Mohammed Qadir (University of Sulaimani)- (Mechanical Properties and Flexural Behavior of Reinforced Concrete Beams Strengthened with Nano-Silica and Polypropylene Fiber) (2021- 2023) (Graduated).
PhD.
1. Shna Jabar Abdulkarim (Erbil Polytechnic University (EPU)-Iraq )- (Prestressing of Spatial Structures with Unaltered Geometry Preservation) (2021-2025) (Graduated).
2. Ahmed Aulla Manguri (Faculty of Civil and Environmental Engineering, Gdansk University of Technology, Gdansk, Poland) (Optimization of structural geometry and stress control from different algorithms) (2021-present).
Defense (Viva) Committee
MSc
1. MSc. Thesis (Evaluation and Performance of Heavy-Duty Steel Structural Communication Towers Under the Effects of Seismic and Wind Loading) by Alameen Hamid Mohammed, Tishk International University & Erbil Polytechnic University (28.06.2020).
2. MSc. Thesis (Mechanical Behavior of Modified Cement with Nano Silica and Nano Alumina Incorporated in Concrete) by Muhammed Halkawt Abdullah, University of Sulaimani, (22.12.2020)
3. MSc. Thesis (Properties of Concrete Reinforced with Synthetic-PET Waste Hybrid Fiber) by Sary Nasr Hussein, University of Sulaimani, (06.10.2021)
4. MSc. Thesis (Effect of Maximum Aggregate Size on the Torsional Strength and Behavior of Reinforced Concrete Beams Without Stirrups) by Karzan Kamal Ahmed, Erbil Polytechnic University, (01.11.2021)
5. MSc. Thesis (Evaluation of Seismic Analysis of Reinforced Concrete Buildings with And Without Shear Walls Based on Linear Modal Time History Analysis) by Rebaz Hussein Ahmed, Tishk International University & Erbil Polytechnic University, (04.08.2022)
6. MSc. Thesis (Bending and Shear Behavior of Two-Layer Casting Reinforced Concrete Beams) by Halmat Burhan Najm, Erbil Polytechnic University, (28.11.2022)
7. MSc. Thesis (Size Effect on Shear Strength of Reinforced Concrete Deep Beams Strengthened with Carbon Fiber Reinforced Polymer (CFRP)) by Walat Omer Miro, Soran University (SU), (25.04.2023)
8. MSc. Thesis (Strength and Microstructure Properties of Concrete Containing Oil-Well Cutting Material) by Nabaz Salih Hussain, Koya University, (02.05.2023)
9. MSc. Thesis (Optimum Flexural Strengthening for Reinforced Concrete T-Shaped Beam by Tightened Strands Ratio and Position Change) by Halmat Muslih Burhan Abdullah, Salahaddin University-Erbil (25.05.2023).
10. MSc. Thesis (Strengthening of Reinforced Concrete Beams with Circular Openings Using Near-Surface Mounting Steel Bars) by Hoshang Hayder Anwer, Erbil Polytechnic University (28.01.2023).
11. MSc. Thesis (Minimum Flexural Steel Reinforcement Ratio for Beams Made of Concrete Containing Pet Waste Fiber) by Hedi Othman Azeez, Erbil Polytechnic University (09.05.2024).
12. MSc. Thesis (Mechanical Properties of Concrete Containing Recycled Face Masks) by Dosti Talib Maghdid, Koya University (22.09.2024).
13. MSc. Thesis (Shear Behavior of Basalt -FRP Reinforced Concrete Beams with Basalt-FRP Stirrups) by Mahmood Dlzar Aziz, Erbil Polytechnic University (17.02.2026).
14. MSc. Thesis (Shear and Flexural Behavior of PET Fiber Reinforced Concrete Beams Utilizing RCA) by Nareen Abdulaziz Hussean, Erbil Polytechnic University (20.04.2026).
15. MSc. Thesis (Seismic Vulnerability Assessment of Some Typical Buildings in Sulaymaniyah City) by Khalat Qadir Ahmed, University of Sulaimani (25.04.2026).
PhD
1. Ph.D. Dissertation (Behavior of Concrete Columns Reinforced with CFRP Rebars Under Eccentric Loading) by Zrar Sedeeq Othman, Salahaddin University-Erbil (13.09.2020).
2. Ph.D. Dissertation (Flexural Strength and Behavior of One-Way Concrete Slabs Reinforced with Combined Steel-FRP Bars) by Avin Hasib Abdullah Qadir, University of Sulaimani (08.09.2022).
3. Ph.D. Dissertation (Serviceability and Flexural Performance of Concrete Beam Reinforced with Glass Fiber Reinforced Polymer Bars) by Muhammad Arf Muhammad, University of Sulaimani (13.04.2023).
4. Ph.D. Dissertation (Minimizing Energy Consumption through Envelope Paste Material by Optimizing Thermal and Other Mechanical Properties Using Nanoparticles) by Chiya Yousef Rahimzadeh, Soran University (SU), (24.09.2023)
5. Ph.D. Dissertation (Investigation of the Effectiveness of FRP Strengthening of PET Fiber Reinforced Low-Strength Concrete Beams) by Mand Kamal Askar, Duhok University (27.04.2024)
6. Ph.D. Dissertation (Structural Behavior of Rectangular Concrete Columns Reinforced with Basalt FRP Bars) by Fkrat Latif Hamid, Salahaddin University-Erbil (30.04.2024).
7. Ph.D. Dissertation (Behavior and Strength of Steel Fiber Reinforced Concrete Columns Using Recycled Aggregate) by Bakhtyar Nassih Najar, Erbil Polytechnic University (05.09.2024).
8. Ph.D. Dissertation (Structural Behavior of High-Strength Concrete Beams Reinforced with CFRP Bars Incorporating Recycled Concrete Aggregate) by Gharbi Mohammed Shareef Saadi, Erbil Polytechnic University (26.04.2025).