May 23, 2024
The following are the steps to follow when using the No-tip Wheel.
Installing
Carefully place the wheel structure onto the designated rod of the wheelchair, ensuring it is aligned properly.
Ensure the clamps are properly positioned around the rod. Tighten the screws on top to secure the clamps and hold the wheel structure in place.
Figure 1: Tighten the screw on top to secure the wheel
Vertical Adjustments
To adjust the height of the wheel, twist the wheel so that the main screw rotates up and down along the threaded opening of the platform.
Then, adjust the stabilizing nuts accordingly to ensure fit.
Figure 2: Adjust the stabilizing nuts to ensure fit
Horizontal Adjustments
To adjust the fit and horizontal position of the wheel, loosen four small screws on top of the structure. Then slide the wheel to a desired position along the rod.
Tighten the screws again and adjust the rubber padding accordingly.
Uninstalling
To uninstall the structure, follow the reverse steps of installing by first loosening the smaller screws on top.
Once the screws on the clamp are loosened, slide the wheel out along the bottom rod of the wheelchair.
Secure the product and tighten all screws to make sure nothing is lost.