Wood Lathe 101
Spindle Turning
Overview: Our Lathe 101 - Spindle class is the perfect opportunity for beginners and experienced wood workers alike to learn the fundamentals of woodturning and develop their skills on a lathe. In this hands-on course, you'll learn how to safely set up and operate a wood lathe, as well as the various tools and techniques for turning wood. You'll also have the opportunity to practice your skills as you create a wood turned project. This class focuses on the skills and knowledge needed to turn a spindle piece and prepares students for Lathe 102, which focuses on faceplate turning and bowls. By the end of the course, you'll have the fundamental skills to create beautiful and functional wood turned spindle pieces. Sign up today and start turning wood like a pro!
Course Objectives:
At the end of the course, students will be able to:
Understand the basic components and operation of a wood lathe
Learn how to safely set up and use a wood lathe
Understand the various tools and techniques for turning wood on a lathe
Practice proper techniques for roughing, shaping, and finishing wood on a lathe
Develop the skills to create and finish wood spindle pieces
Pre-requisites: Woodshop 101/102
Lathe Start-up Checklist
Check yourself: Personal protective equipment: dust mask, safety glasses, full face shield; DO NOT wear gloves; tie back hair, remove loose clothing and jewlery that can catch
Check the surroundings: make sure nothing on or around the tool; confirm nobody is working too close to you
Check your workpiece before mounting to the lathe to ensure there are no cracks or splits that could fly apart. Ideally dry, straight-grained, and free of any knots or defects. Mount wood ALONG grain.
Mount the workpiece and ensure it is secured properly. Use the tailstock and a live center, or a faceplate if the piece is large or irregularly shaped.
Ensure the tailstock is securely locked in place if you are using it.
Adjust the tool rest so that it is close to the workpiece, but not touching it, and lock it in place. We recommend keeping the tool rest within ¼-½ inch of the wood.
Turn the lathe by hand a few times to ensure the wood does not foul on any part of the lathe or the tool rest.
Fix any guards in place that your lathe may have. Especially if working with large pieces of wood
Ensure that you are wearing all protective items as outlined above.
Check that the lathe speed is down low to start off. Use reference speed chart for appropriate speeds (9000 / diameter of piece (in)) Large diameter items require a low speed while small diameter items can handle a faster speed. Some lathes have a soft start feature which means they turn slowly at the start before speeding up.
BEFORE STARTING your lathe, stand to one side of the wood being turned. Right in front of your workpiece is known as the Red Zone. Stay away from the Red Zone until your lathe has started properly. If the workpiece is spinning fine then it is safe to stand in front of it to start turning.
Check the surroundings are safe and clear.
Start your lathe and ensure the workpiece is turning free. If your lathe has any vibrations or shaking, stop the lathe and double-check how your workpiece is mounted. Keep in mind out of round and odd-shaped pieces may wobble a bit at the start but this is perfectly normal until you rough it smooth
Before you introduce a tool to the wood, be sure you are holding it firmly with both hands. Keep your bottom hand at the end of the handle and lock it in beside your hip to give you the most control. Make sure the tool is firmly rested on the tool rest before it contacts the wood.
Only start introducing the tool once you are comfortable and make very light cuts to begin. Slow is smooth, smooth is fast.
When done, turn off lathe and allow it to slow down on its own
Sweep up and return all equipment back to its original settings