Arduino語言基礎

Arduino程式與C語言程式很相似，但語法更簡單且易學易用，完全將複雜的設定編寫成「函式」，使用者只需輸入參數到函式中即可。

/* 多行註解

Blink

Turns on an LED on for one second, then off for one second, repeatedly.

Most Arduinos have an on-board LED you can control. On the Uno and

Leonardo, it is attached to digital pin 13. If you're unsure what

pin the on-board LED is connected to on your Arduino model, check

the documentation at http://www.arduino.cc

This example code is in the public domain.

modified 8 May 2014

by Scott Fitzgerald

*/

// the setup function runs once when you press reset or power the board 單行註解

void setup() { setup()設定變數初值、接腳模式

// initialize digital pin 13 as an output.

pinMode(13, OUTPUT);

}

// the loop function runs over and over again forever

void loop() { loop()重覆執行所須動作

digitalWrite(13, HIGH); // turn the LED on (HIGH is the voltage level)

delay(1000); // wait for a second

digitalWrite(13, LOW); // turn the LED off by making the voltage LOW

delay(1000); // wait for a second

}