Open the following link to print the project instructions.
Make a joint with pocket screws
Use the following videos to help you understand the printed directions.
Jointer
Rip on Table Saw
Radial Arm Saw
Mark the Location of the Pocket Holes
Pocket Drill
Gather Tools
Assemble
Sand
Router Front
Router Back
Chisel Glue
Chisel Out Corners
Use a Combination Square
Drill Pilot Holes
Screw on back
Router with 1/4" Roundover Bit
Mark the Front of Your Frame for the Slot on the Back
Get Instructors Help to Router the Slot on the Back
Remove Back and Apply Putty
Sand
Finish and Put on Back