BOX

Use both the check off sheet and the photo directions.

photo directions can also be found on theyellow box cart.

Open the following link to print the project check off sheet.

2021 box check-off sheet

Open the following link to open the photo directions.

2021 Box Photo Directions

Use the following videos to help you understand the printed directions.

step 7 layout slots for the bottom_0.mp4

Step 7

Layout Slots

step 8 cut the slots_0.mp4

Step 8

Cut the Slots

step 9 cut the bottom to fit_0.mp4

Step 9

Cut the Bottom to Fit the Box

Step 10 - 11 layout the curve on the bottom_0.mp4

Step 10-11

Layout and Cut Bottom Curves

Step 13 glue box together_0.mp4

Step 13

Glue Box Together

step 14 layout corner holes_0.mp4

Step 14

Locate Holes for Dowels

step 15 Drill holes in corners_0.mp4

Step 15

Drill Holes

step 16 Cut and install the dowels_0.mp4

Step 16

Cut and Install Dowels

step 17 Get wood and cut for the top_0.mp4

Step 17

Get Material for the Top

step 18a layout and drill the hole in the top_0.mp4

Step 18 a

Drill 2 1/4" Hole in Your Top

step 18b make your own design_0.mp4

Step 18 b

Make Your Own Top

step 19 router the hole in the lid_0.mp4

Step 19

Router Front

step 20 Router the pocket_0.mp4

Step 20

Router Back Pocket

step 21 trim the dowels flush_0.mp4

Step 21

Trim Dowels

step 22 Layout and drill the holes in the top edge_0.mp4

Step 22

Layout and Drill 1/4" Holes on Top Edges

step 23 Glue the lid on the box_0.mp4

Step 23

Glue the Lid

step 24 Get and cut wood for the tray_0.mp4

Step 24

Cut a Piece of Wood for Your Tray

step 25a layout the design for a custom tray_0.mp4

Step 25 a

Layout Tray Design

step 25b layout the holes for the tray_0.mp4

Step 25 b

Layout if You Would Like to Drill Holes for Your Tray

step 26a drill and cut the design for a custom tray_0.mp4

Step 26 a

Cut or Drill the Tray

step 26b Drill holes for tray_0.mp4

Step 26 b

Drill Holes for Your Tray

step 27 Glue the bottom on the tray_0.mp4

Step 27

Glue Tray together

step 28 Trim the top flush with the box_0.mp4

Step 28

Trim the Lid

step 29 Cut the lid off_0.mp4

Step 29

Cut the Lid Off

step 30 Install the dowels in the lid_0.mp4

Step 30

Install Dowels for Lid

step 32 Router and sand the tray_0.mp4

Step 32

Router the Tray

step 33 Intsall the backing piece_0.mp4

Step 33

Install the Backing Piece for a Picture