Embedded Files
The side of this soundbar has a source selector, speaker mute, microphone mute, volume and bluetooth buttons.
ACV-2100
ACV-2100
Acendo Vibe Conferencing Sound Bar
Acendo Vibe Conferencing Sound Bar
See downloads section for utilities and manuals.
Connecting to your Soundbar
Connecting to your Soundbar
You can connect to your soundbar with a USB cable or wirelessly via Bluetooth.
You can connect to your soundbar with a USB cable or wirelessly via Bluetooth.
To use your soundbar to play music or other audio via Bluetooth, follow these instructions:
To use your soundbar to play music or other audio via Bluetooth, follow these instructions:
Push the Bluetooth icon on your remote control until it blinks
Go to your Bluetooth Preferences on your device and choose the Soundbar to pair with. This will then enable you to play sound from your device (phone, computer, tablet) to the soundbar.
Turn the volume up and down by rotating the outer ring on the remote control.
There can be delays of a second or two using Bluetooth.
For videoconferencing, you should use the USB method of connecting to the soundbar.
If you are using your soundbar for videoconferencing eg: Google Meet meetings, you will want to use the USB connector in order to avoid any delay (lag) between the audio and video.
If you are using your soundbar for videoconferencing eg: Google Meet meetings, you will want to use the USB connector in order to avoid any delay (lag) between the audio and video.
To connect to your device using the USB cable
To connect to your device using the USB cable
Plug in your USB cable to your computer
In Google Meet go to Settings->Choose USB AUDIO CODEC as your Audio OUTPUT
For INPUT please choose ->CX20921 via USB. (NOT USB CODEC)
This will then use the built in microphones in the soundbar to capture the sound in the room and transmit it to the Google Meet meeting.
Ignore the red warning triangle below the settings.
Google Meet Settings
To connect your computer to the soundbar via USB - In System Preferences on your Macbook - go to "Sound" and then click the tabs that say 'Input' and 'Output' and make the settings as seen here.
To connect your computer to the soundbar via USB - In System Preferences on your Macbook - go to "Sound" and then click the tabs that say 'Input' and 'Output' and make the settings as seen here.
Settings for Sound INPUT - Choose CX20921 (NOT USB AUDIO CODEC)
Settings for Sound OUTPUT - Choose USB AUDIO CODEC
Product Literature and Video
Product Literature and Video
HOW TO CHANGE and CONFIGURE YOUR BLUETOOTH SETTINGS
HOW TO CHANGE and CONFIGURE YOUR BLUETOOTH SETTINGS
Download the utility • Acendo Vibe Configuration Tool for Mac and install on your Macbook - to install double click the downloaded file and follow the prompted instructions
Connect the Soundbar to your USB port on your Macbook with the USB cable.
Find Acendo Vibe by typing "Acendo" into the magnifying glass search tool.
Launch the Acendo Vibe Configuration Tool for Mac
Push the buttons and hold for several seconds as shown below to enter 'Setup Mode'
In the utility, choose 'Bluetooth' and then name your device: Room # - Soundbar
Click 'Transfer' and then 'Send new settings to Soundbar'.
The Device will restart. You can quit the utility. The Bluetooth device should now have the name you've assigned it.
Troubleshooting
Troubleshooting
If the device has no power, or you do not see the USB options on your computer, please double check that the soundbar cables are plugged in. To do this, tilt the soundbar towards you on its hinge, check that the connectors inside are plugged in firmly. One is power, the other is the USB cable.
If the device has no power, or you do not see the USB options on your computer, please double check that the soundbar cables are plugged in. To do this, tilt the soundbar towards you on its hinge, check that the connectors inside are plugged in firmly. One is power, the other is the USB cable.
If your remote control stops working, you may need to change the batteries. Slide the toggle to the 'Unlocked' symbol and twist the bottom cover until it comes off. Replace the two AA batteries inside, being careful to observe the polarity (flat side of battery against the spring). Turn the cover back on and toggle the switch to the 'Locked' position.
If your remote control stops working, you may need to change the batteries. Slide the toggle to the 'Unlocked' symbol and twist the bottom cover until it comes off. Replace the two AA batteries inside, being careful to observe the polarity (flat side of battery against the spring). Turn the cover back on and toggle the switch to the 'Locked' position.
Page updated
Report abuse