Manufacturing

This photo shows the construction of this box which is used which is what we need to use to pour the resin inside we need to make sure that this does not leak to do this we pour water i side the box and if water is leaking then we would need to cover those areas up or else if we pour in the resin while it is still leaking then the resin wold leak out which would create a huge mess.

This is after i finally stopped it from leaking for me it took a massive amount of glue to finally stop it from leaking but aslong as it doenst leak.After this we would need to make a second box for another layer of the mosquito coil

Machines

cutting machine

Using this machine we cut our wood in many part such as into 3s for those design where the back and front are not the same, or in my case getting a bigger peace of wood and cut it to a appropriate sizes.

sanding machine

sanding machine a machine that has a sandpaper belt that is moved down by a motor to do the sanding part for us.

template

This template shows the front,back and side view of my mosquito coil design.We need to print this out to stick on the wood with glue after this we are ready to cut the wood.

Cutting

To cut my wood into shape I want in the template i would need to use a machine called a fretsaw. after that i use a flat filer to make it into a better shape.Then i would ask Mr Douglas to cut it into 3 different pieces and i would make one of those layers into the place where i would put the mosquito coil.

Page updated

Report abuse