3D Model Cube Puzzle

• • Create a new Onshape document named: block # - Cube Puzzle - Last Name

  • Share your document with me.

  • Set workspace units to Millimeters.

• • Create the five parts to your cube using CAD.

  • Use a new part studio for each piece (rename the part studio the piece color)

  • Choose one of your views from your "Multi-view sketches" to start from. For instance, if you pick your front view - start a sketch on the front plane and draw solid lines for everything you see in your front view. Make sure it is fully defined (use dimensions & constraints to have all black lines)!! THEN use extrude to add the depth. You should need multiple extrudes to make your piece (see "Creating your first Puzzle Piece" below!)

    • You can create multiple extrudes from one sketch by unhiding your sketch (click on the eye next to the sketch).

    • You may need additional sketches to create your puzzle piece. You can sketch on the faces (sides) of parts you create by selecting it as your Sketch Plane.

    • The "cubes" you are building with are 0.75 inches or 19.05 mm on all sides, so all your dimensions should be in multiples of 0.75 inches (1.5 inches (38.1 mm) , 2.25 inches (57.15 mm)).

    • You can enter inches even when you are in a millimeter workspace by typing "in" after the number and Onshape will convert it for you.

    • Color the parts within the CAD environment using the same color combination used in the sketching phase of your project.

    • Make sure to adjust faces of interlocking pieces as necessary (see video below).