Embedded Files
Inventory
Inventory
SME X1 Controller for Netgain Hyper 9 Motor
Control Box Rail
AC Main Contactor/DC Main Contactor
Control Box Harness
Control Box Frame
DC to DC Converter
Auxiliary Battery
Control Box Base Harness
Fan Set
High Voltage Conduit
Low Voltage Conduit
Motor Controller Cables
The Builders
The Builders
The Build
The Build
Day One:
Day One:
Bolted Down Components
Bolted Down Components
Auxiliary Battery
DC to DC Converter
Fan Set
Wire Clamps
Control Box Rail
Main Contactor
Day Two:
Day Two:
Wiring
Wiring
Control Relay
DCDC Relay
Connected to CB Rail
Drive Relay
Connected to CB Rail
Bolted down SMEX1 Controller
Day Three:
Day Three:
Wiring
Wiring
Pins fully wired to the Control Box Rail
Attached Motor Cables to the SMEX1 Controller and the MC
Day Four:
Day Four:
Wiring and Installation
Wiring and Installation
Completing the Assembly: Wiring was completed for the Low Voltage Conduit, Wire Clamps were fixed, and the High Voltage Conduit was hooked up to the Auxiliary Battery and Main Contactor
Completing the Assembly: Wiring was completed for the Low Voltage Conduit, Wire Clamps were fixed, and the High Voltage Conduit was hooked up to the Auxiliary Battery and Main Contactor
Complete Control Box Assembly
Complete Control Box Assembly
The Installation: Attached Motor Cables to the Motor and connected Sensor Cables, and bolted Control Box to the Floor
The Installation: Attached Motor Cables to the Motor and connected Sensor Cables, and bolted Control Box to the Floor
Installation
Installation
Complete Install
Complete Install
Control Box Lesson and Kahoot Quiz
Control Box Lesson and Kahoot Quiz
Page updated
Report abuse