ip link add link eth0 name vlan122 type vlan id 122
For 18.04:
#cat /etc/network/interfaces
source /etc/network/interfaces.d/*
#cat /etc/network/interfaces.d/mgnt
auto eno1
iface eno1 inet dhcp
#cat /etc/network/interfaces.d/vmnet
auto eno2 eno3 eno4
iface eno2 inet manual
bond-master bond0
up ip link set dev $IFACE txqueuelen 10000
iface eno3 inet manual
bond-master bond0
up ip link set dev $IFACE txqueuelen 10000
iface eno4 inet manual
bond-master bond0
up ip link set dev $IFACE txqueuelen 10000
auto bond0
iface bond0 inet manual
bond-slaves eno2 eno3 eno4
bond-miimon 100
bond-mode 802.3ad
bond-xmit_hash_policy layer2+3
#
auto enp0s7
iface enp0s7 inet static
address 192.168.1.112
netmask 255.255.255.0
gateway 192.168.1.100
dns-nameservers 192.168.1.100
link-speed 100
link-duplex full
ethernet-autoneg off
Updateing:
sudo apt-get update
sudo apt-get upgrade
Updating:
sudo apt-get update
sudo apt-get upgrade
Installing:
sudo apt-get install ethtool
sudo apt-get install bridge-utils
sudo apt-get install ifenslave
sudo apt-get install vlan
sudo apt-get update && sudo apt-get upgrade
sudo apt-get install ethtool bridge-utils ifenslave vlan
====================================================================
Adding modules
sudo vi /etc/modules
Make sure it has these in it
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with “#” are ignored.
loop
lp
rtc
bonding
====================================================================
root@brlvsi01:~# cat /etc/network/interfaces
auto lo
iface lo inet loopback
auto em1
iface em1 inet manual
mtu 9000
bond-master bond0
auto em2
iface em2 inet manual
mtu 9000
bond-master bond0
auto em3
iface em3 inet manual
mtu 9000
bond-master bond1
auto em4
iface em4 inet manual
mtu 9000
bond-master bond1
auto bond0
iface bond0 inet manual
bond-mode 1
bond-miimon 100
#bond-slaves em1 em3
bond-slaves none
auto br0
iface br0 inet static
address 10.22.125.130
gateway 10.22.125.129
netmask 255.255.255.192
dns-nameservers 10.77.128.10
dns-search ttk.net
bridge_ports bond0
auto br0.1050
iface br0.1050 inet manual
#iface br0.1050 inet static
# address 188.143.42.2
# netmask 255.255.255.0
vlan-raw-device br0
auto bond1
iface bond1 inet manual
bond-mode 1
bond-miimon 100
#bond-slaves em2 em4
bond-slaves none
auto br1
iface br1 inet static
address 10.22.125.227
netmask 255.255.255.224
bridge_ports bond1
auto br1050
iface br1050 inet manual
bridge_ports br0.1050
iptech@ebgvsi01:~$ cat /etc/network/interfaces
auto lo
iface lo inet loopback
auto em1
iface em1 inet manual
mtu 9000
bond-master bond0
auto em2
iface em2 inet manual
mtu 9000
bond-master bond0
auto em3
iface em3 inet manual
mtu 9000
bond-master bond1
auto em4
iface em4 inet manual
mtu 9000
bond-master bond1
auto bond0
iface bond0 inet manual
bond-mode 1
bond-miimon 100
bond-slaves none
auto br0
iface br0 inet static
address 10.66.125.130
gateway 10.66.125.129
netmask 255.255.255.192
dns-nameservers 10.77.128.10
dns-search ttk.net
bridge_ports bond0
auto br0.1050
iface br0.1050 inet manual
vlan-raw-device br0
auto br0.1018
iface br0.1018 inet manual
vlan-raw-device br0
auto br0.19
iface br0.19 inet manual
vlan-raw-device br0
auto bond1
iface bond1 inet manual
bond-mode 1
bond-miimon 100
bond-slaves none
auto br1
iface br1 inet static
address 10.66.125.227
netmask 255.255.255.224
bridge_ports bond1
auto br1050
iface br1050 inet manual
bridge_ports br0.1050
auto br1018
iface br1018 inet manual
bridge_ports br0.1018
auto br19
iface br1019 inet manual
bridge_ports br0.19