Do you wanna get it how to access 2008 Tata Indigo GLS rear breaking assembly? This is perhaps the most complete instructions on how to do that.
1 of 4: Remove the wheel cover by pulling it off the rim; it may require huge effort if the tyre had gone through muddy water, etc.
2 of 4: Unscrew four wheel bolts and remove the tyre
3 of 4: Remove the cap covering the hub by using a flat screw driver and a hammer (see below)
The hub is now exposed
4 of 4: Remove the 16mm nut and pull out the drum. Note: In case the drum is jammed/seized by brake shoes, then the easiest (and yet still difficult) is to put back the tyre on the drum and wriggle it out so as to come out with the drum.
Rear brake assembly exposed;
Close-up view of the rear brake assembly (with top part detached);
Comments: For comments please send email to wannaget8email@gmail.com