M. Tech. Thesis Guided
M. Naga Teja, Improved ground path Power-On Reset circuit with Brownout detector in 5nm FinFET Technology, 2019-2021.
Sadique Mohammad Iqbal, Design of a 12 bit SAR ADC in 16nm Technology, 2019-2021.
Umakanta Padhan, Analog Validation, Characterization and Analysis of I/O Pad in Test Vehicle, Internship at NXP, Noida, 2018-2020.
Soibam Aruna Chanu: Modelling and Simulation of High Efficiency Lead Free Perovskite Solar Cell, 2017-2019.
Anuj Kumar: GaN-based MOS-HEMT Modeling using ADS, 2016-2018.
Ranjit Paswan: Design and Simulation of AlGaAs/GaAs-HEMT as a Biosensor, 15th May 2017.
Usham Siddhartha: DC and RF Characteristics Study of SiGe HBT with different base contact Configurations, 20th July 2015.
G. Srinivasarao: Modelling and Analysis of Fringing Frequency Effect on Microwave Characteristics of InAlN/AlN/GaN HEMT, 6th May 2015.
Juktajiban Panda: Modelling and Simulation of 2DEG Density and Threshold Voltage of GaN-based MOSHEMT, 6th May 2015.
Abhishek Bhattacharjee: DC and Microwave Characteristics Study of InAlN/GaN HEMT, 5th May 2014.
Devashish Pandey: Modelling and Characteristics Study of InAlN/AlN/GaN- based MOSHEMT for Microwave Frequency Operation, 5th May 2014.
Dibyadrasta Sahoo: Leakage Current Analysis and RF Characteristics Study of Junctionless Transistor, 5th May 2014.
Vineeth Krishnan: Characteristics Study of 3D Junctionless Transistor, Department of ECE, NIT Silchar, 3rd May 2013.
Bijay Krushna Parida: Design and Implementation of 16-bit Reed Solomon Encoder for Secure Wireless Communication using Cadence Tool, 2010-2012.
Amiya Ranjan Das: Design and Implementation of 32-bit Reed Solomon Encoder using Cadence Tool; 2010-2012.
Rakesh Kumar Patro: A High Performance Architecture Design of PLC Dedicated Processor using Cadence; 2010-2012.
Prashanta Kumar Dehury: Advance Error Correction Code based Online Error Detection and Correction Scheme for SRAM, 2010-2012.
Rajesh Misra: Characteristics Study of GaAs Heterostructure Based High Electron Mobility Transistor Using Sentaurus TCAD; 2007-2009.
Rajesh Kumar Behera: Design & Simulation of CMOS Circuits using Sentaurus TCAD Tool; 2007-2009.
Mangesh Nagrale: Design of 10-Bit SAR ADC using 0.35μ Technology for RSSI; 2006-2008.
Archana Mishra: Design of Op-Amp using TL Analysis; 2006-2008.