How To Setup A TP Link Router

At first glance, preparing a router might appear daunting but if you follow the steps in this informative article it's extremely simple. The simple installation is super-simple but you do not need to stop there. You will want to produce a couple of modifications to increase security and make sure the only men and women who may access your router and your network is that you.

TP-Link routers are very popular as a result of their competitive cost and simplicity of usage. They provide quick network access, can act as a firewall in addition to a router, and may provide wireless access in your property.

To make a network, you will require a modem using an active internet connection and a couple of computers. We start by linking a pc via Ethernet for configuration but once finished, you can switch to wireless if you will need to. You cannot set up a router using WiFi.

Establishing your router

You may have to configure your modem to modem-only style but that depends entirely on your ISP. It's well worth checking the modem settings display to discover. Although it's possible to use two routers in a system, it is possible to just use a single DHCP server which should be inside your router, not your modem.

When You have unboxed your own router:

1. Place it near a ISP modem and connect the modem to the WAN port of the router with an Ethernet cable.

1. Switch the router on. The connection light should go green after it has a connection.

2. Join your computer to the router's LAN port via Ethernet. Additionally, it doesn't matter which port number you're using.

3. Open a browser and type 192.168.1.1 to the URL bar. Attempt 192.168.0.1 if 1.1 doesn't do the job. You should see a TP-Link screen appear.

4. Type admin and admin for the username and password.

You're now logged in to the configuration screen of the router. It's from here that we set everything up.

Change the Router Password

The very first thing you should always do when establishing a new router is to modify the password. Everyone knows admin admin so that you will need to change it now.

• Select Management and Access Control.

• Select Password.

• Enter the old password and the password twice.

• Select Save.

On some routers, the menu will be Maintenance and Administration however, the remainder must be the exact same. Some routers allow you to modify the username. If yours has that option, change that too. Do your best not to create your username identifiable and be sure your password is powerful.

Establish WiFi on a TP-Link router

Setting up wireless is just as simple. You'll need to establish a WiFi password for all individuals to use to get your wireless network. Make it as powerful as possible while also keeping it useable. Make certain it is different from your own router password.

1. Select Wireless in the TP Link Setup menu.

2. Select Wireless Network Name and call it something purposeful.

3. Select the area and set the mode. 802.11 Mixed is fine there.

4. Select a station or set it to auto now in the event you prefer.

5. Then pick Save.

6. Select Wireless and Wireless Security.

7. Select WPA2 as the encryption.

8. Set a new wireless password. Make it something strong.

9. Select Save.

Your wireless system is now configured and ready to work with. Once you've rebooted your router, connect a phone or other device for it with the password you set up. It must connect straight away.