Rabbit Rally Calibration

Calibration: Each rally will provide a calibration section to allow you to compare your odometer to the one used to measure the rally.

Before you start, use the Rabbit menu to go to Connections. Be sure your Odometer Source GPS is set to MPH (Imperial).

• Pull up to the start of the calibration.
• In the Rabbit menu, select Calibration. (note the instructions there)
• Press “Set Odometer to Zero”
• Use the Rabbit menu to return to Navigation.
• At the end of the calibration section, note your mileage then select Calibration from the Rabbit menu.
• Press the 0.000. It should bring up a number pad. Enter the organizers mileage and press Done.
• Press the Calibrate button and return to Navigation.
• Your Rabbit is now calibrated.

Advanced Calibration Features: When on the Calibration display you will see three dots in the upper right corner. Press them and the Calibration History screen appears. This shows history. You can rename them to match a rally. If you press on one of the Calibration boxes you get another menu.



Current Menu - Allows you to manually set the factor for each of the sources.

CAL date & time - Selecting one of the other these allows to switch to that calibration, rename it, or delete it.

Original- Shows the calibration that the app started with.