Dr. Rubaiyet Iftekharul Haque
PROFESSIONAL WORK EXPERIENCES
December 2022 - To date
Assistant Professor, Department of Mathematics & Physcis, North South University, Plot - 15, Block - B, Bashundhara R/A, Dhaka - 1229, Bangladesh.
February 2020 - March 2022
Post Doctoral Scientist, Department of Mechanical Engineering , Technical University of Denmark (DTU), Produktionstorvet 425, 2800 Kongens Lyngby, Denmark.
March 2016 - December 2019
Post Doctoral Scientist, Institute of Microtechnology, École Polytechnique Fédérale de Lausanne (EPFL), Rue de la Maladière 71b, CP 526, CH-2002 Neuchâtel, Switzerland.
March 2012 - December 2015
Researcher, Centre Microélectronique de Provence (CMP), École nationale supérieure des Mines de Saint-Étienne (ENSM-SE), 880, avenue de Mimet- 13541 Gardanne, France.
May 2012 - April 2015
Ph.D. Engineer, TAGSYS RFID, 785 Voie Antiope III, 13600 La Ciotat, France.
2010 - 2011
Research Associate, Electroceramic Group, Department of Materials and Ceramics Engineering, CICECO, University of Aveiro, 3810-193 Aveiro, Portugal.
2009 (March - August)
Intern, Optical Communication Laboratory, Institute of Telecommunication (IT), 3810-193 Aveiro, Portugal.
TEACHING EXPERIENCES
Physics - I (Mechanics) & Physics - II (Electricity and Magnetism) at NSU, Bangladesh.
Soft microsystems processing, doctoral course (EPFL, Switzerland), involved in presenting demonstrations on printing approaches and sintering methods.
“Printed Microsystems”, of ‘Advanced MEMS and Microsystems’ a Master’s course (EPFL, Switzerland).
“Static and Dynamics”, Undergraduate course (EPFL, Switzerland), part of exam paper grading team.
“Méthode des Eléments Finis / Finite element method”, Master’s course (ISMIN 2A-1S, Gradanne)
“Opening printed electronics (workshop)”, Master’s course (ISMIN 3A-1S, Gardanne)
SUPERVISING POSTGRADUATE RESEARCH PROJECTS
Designing and development of cryogenic stage for nanoscale 3D printer, Master’s semester project, August 2020, Technical University of Denmark (DTU), Kongens Lyngby, Denmark.
Evaluation of 3D printed sensors used to measure normal and shear plantar force in a shoe insole, Master’s Thesis, August 2019 – January 2020, Microcity, École Polytechnique Fédérale de Lausanne (EPFL), Neuchâtel, Switzerland.
Piezoelectret soft energy harvesters for wearables sensors and energy harvester, Master’s Thesis, February 2019 – June 2019, Microcity, École Polytechnique Fédérale de Lausanne (EPFL), Neuchâtel, Switzerland.
Triboelectric generator: to harvest energy from fluid motion, Master's Thesis, February 2017 – July 2017, Microcity, École Polytechnique Fédérale de Lausanne (EPFL), Neuchâtel, Switzerland.
Development of stretchable triboelectric band for harvesting energy from body movement, Master's semester project, September 2016 – December 2016, Microcity, École Polytechnique Fédérale de Lausanne (EPFL), Neuchâtel, Switzerland.
Development of inkjet-printed polyvinylidene fluoride - trifluoroethylene (PVDF-TrFE) ink, Master's Thesis, April 2015 – September 2015, Centre Microélectronique de Provence, École nationale supérieure des Mines de Saint-Étienne, France.
Développement d’une couche poly(difluorure de vinylidène– trifluoroéthylène) P(VDF/TrFE) par impression jet d’encre, Master's Thesis, Mach 2014 – August 2014, Centre Microélectronique de Provence, École nationale supérieure des Mines de Saint-Étienne, France.
SUPERVISING UNDERGRADUATE RESEARCH PROJECTS
Development of electronics readout circuits for different electromechanical wearable sensors, École Polytechnique Fédérale de Lausanne (EPFL) (Exchange student from University of Ottawa), August 2019 – December 2019, Microcity, EPFL, Neuchâtel, Switzerland.
Development of joint motion setup, Project for Technical School (Travail de Diplôme), École Polytechnique Fédérale de Lausanne (EPFL), August 2019 – November 2019, Microcity, EPFL, Neuchâtel, Switzerland.
Modification of the control mechanism of vibrational characterization setup tool, Project for Technical School (Travail de Diplôme), École Polytechnique Fédérale de Lausanne (EPFL), August 2018 – To date, Microcity, EPFL, Neuchâtel, Switzerland.
“Modification of characterization tool for wearable energy harvester”, project for Technical School (Travail de Diplôme), École Polytechnique Fédérale de Lausanne (EPFL), August 2017 - November 2017, Microcity, EPFL, Neuchâtel, Switzerland.
“Development of characterization tool for wearable energy harvester”, Final year project for Technical School (Travail de Diplôme), École Polytechnique Fédérale de Lausanne (EPFL), October 2016 - September 2016, Microcity, EPFL, Neuchâtel, Switzerland.