Current Software Version 6.0.61
1) Prepare USB flash drive by formatting it to FAT32.
Note: Only 8GB or less flash drive, 8GB or less primary partition has been tested so far.
Download the 3 files at the bottom of this page.
2) Copy the following files to the flash drive root folder: The file names must not be changed!
· PXT2.bin
· PXT2.tft
· HmiCrc32.bin
3) Ensure System is off.
4) Remove the 4 screws that hold the screen in place.
5) Remove the screen (The wires are long enough to let the screen sit out of the way)
6) Insert flash drive into the USB port on the driveboard.
7) Apply power and wait until both the HMI and firmware are flashed. The system will restart once complete.
8) Remove the flash drive from the USB port.