PVC SeatStand 45P

#45 is a three stage model. First two stages are designed to work in pair with a desk (office).

First Stage provides the support for the car seat giving the possibility of different positions for the seat angle and height.

To learn how to make PVC parts moving, watch this video (English subtitles provided)

Second stage provides the support for the pedals set giving the possibility of different angle and a very strong grip.

This two stages are functioning autonomous and cooperate with the third one which offers the ability of different angles for the wheel (normal, GT or F1) and also a base for the monitor.

If you want to make this cockpit completely autonomous then you add the third stage which in fact is the wheel (and monitor) holder.

Monitor can seat on stage three or continue to use the desk for this purpose.

Although, after the completion of the third stage, cockpit becomes a complete one, it still can be used combined with a desk as it is designed to fit under common desks with clearance under 70cm.

This model can achieve seat inclinations of 12° degrees.

The PVC tubes I use for this design have a diameter of 50mm. The type of these PVC fittings are called "High Pressure PVC" and they are used mostly (in my country - Greece) for swimming pools.

In case you use the imperial units system,  you could try to replace the 50mm size by 2" (inch) pipes and fittings. They should be quite similar in dimension!

If you have any questions please send me a note at teidisaris@gmail.com.