NetX

Wake On LAN button allow to send a "magic packet" to wake up a remote device.

 Only if the SSH is configured, you can see the stand-by button and shutdown button.

 Stand-by button send a command to remote device to put in stand-by it.

Shutdown button send a command to remote device to shutdown it.

Ping the remote device sending an ICMP message.

Port Scan allow to find the port that are open on the remote device.

This page shows many information like:

IP Address;

MAC Address;

Vendor;

Status: if you click on this field, you can change the device status in:

Registered Device: if the network is monitored and the device status is set to "registered" 

NetX doesn't send a notification if this device connects to the network again.

Unknown Device: if the network is monitored and the device status is set to "unknown"

NetX send a notification if this device connects to the network again.

NetBIOS Name;

NetBIOS Domain;

Bonjour Name.

Device icon: if you click on the icon NetX shows a new window with a icons list where it's possible 

to choose the icon to associate to the device.