Real Head Motion for RFactor 1

Installation

Set the Head motion to 0% in the Menu Control settings.

First, edit the file\rFactor\UserData\player\player.PLR

And change those lines like this

Cockpit Vibration Mult1="0.00000" // Primary vibration multiplier affects eyepoint position (base magnitude is in VEH or cockpit file)

Cockpit Vibration Freq1="0.00000" // Primary rate of vibration affects eyepoint position (higher framerates allow higher rates)

Cockpit Vibration Mult2="0.00000" // Secondary vibration multiplier affects eyepoint orientation (base magnitude is in VEH or cockpit file)

Cockpit Vibration Freq2="0.00000" // Secondary rate of vibration affects eyepoint orientation

Car Vibration Mult1="0.00000" // Vibration multiplier affects cameras attached directly to the car

So the internal rFactor camera vibration will not interfere

Then set the max pitch/roll as default =>

Look Up/Down Angle="0.40000" // Angle to look up/down (pitch) w/ controller in radians (= degrees / 57)

Leanahead Angle="0.00000" // Angle to lean head (roll) w/ steering in radians (= degrees / 57)

Look Roll Angle="0.75000" // Angle to lean head (roll) w/ controller in radians (= degrees / 57)

Then copy RealHeadMotion.dll in \rFactor\Plugins

Now it's ok :)

Configuration File

It must be in same directory than the DLL file.

Default commented .ini in ZIP archive.