Journal Papers (Total: 67)

(+Equal contributing authors, * Corresponding authors)

1. Hsiao-Jou Wu, Hon-Tsen Yu, Paul Martin Sander, Jia-Yang Juang*, and Tzu-Ruei Yang*, "Shell rigidity reveals diverse evolutionary history of dinosaurian nesting biology," under review

2. Yu-Tang Luo, Zhe-Han Zhou, and Jia-Yang Juang*, "Effect of haze and surface morphology of transparent electrodes on perovskite solar cell efficiency via tunable-haze APPJ deposition," under review

3. Yu-Tang Luo, Zhe-Han Zhou, and Jia-Yang Juang*, "Boosting light trapping in perovskite solar cell by ZnO-based absorption enhancement layer produced by atmospheric pressure plasma jet," under review

4. Chih-Yun Chou, Lu-Chi Hsu, Ming-Tsang Lee, and Jia-Yang Juang*, "Enhanced flexural strength and optoelectrical properties of AgNW/GZO composite electrodes on flexible glass via atmospheric pressure plasma jet," Materials & Design, vol.258, 114667, October 2025. online   pdf

5. Yan-Ting Lin, Chi-Yi Tsai, and Jia-Yang Juang*, "Bioinspired untethered, electromagnetic pipe-crawling robot," Bioinspiration & Biomimetics, vol.20, no.4, 046014, July 18, 2025. online

6. Ritik Raj and Jia-Yang Juang*, "Multi-material additive manufacturing for soft robotic systems,"Advanced Robotics Research, vol.1, no.1, 202500064, June 29, 2025. online

7. Yu-Ying Lin, Ritik Raj, and Jia-Yang Juang*, "A comprehensive review of dexterous robotic hands: design, implementation, and evaluation," Bioinspiration & Biomimetics, vol.20, no.4, 041003, July 7, 2025. online

8. Chih-Yun Chou, Po-Han Chiu, Yin-Chun Chao, Hung-Wei Yen, and Jia-Yang Juang*, "A comparative study of the structural and optoelectronic properties of Al- and Ga-doped ZnO films deposited by atmospheric pressure plasma jet," Journal of Alloys and Compounds, vol.1031, 180898, June 5, 2025. online

9. Yi-Hung Chiu+, Yu-Ting Huang+, Mao-Chuan Chen, Yi-Xian Xu, Yu-Chen Yen, and Jia-Yang Juang*, "Inverse design of face-like 3D surfaces via bi-material 4D printing and shape morphing," Virtual and Physical Prototyping, vol.20, no.1, e2507099, December 31, 2025. online

10. Yan-Ting Lin, Shao-Hong Liao, Yi-Chian Tsai, Yen-Chu Chao, Jing-Ting Zhu, Jung-Ren Huang, Chien-Kai Wang*, and Jia-Yang Juang, "Systematic measurement and calibration approach for mechanical properties of polymer thin film materials," Journal of Mechanics, vol.40, pp.774-782, December 3, 2024. online   pdf

11. Mao-Chuan Chen, Yun-Chung Lee, Jia-He Tee, Ming-Tsang Lee, Chuan-Kang Ting*, and Jia-Yang Juang*, "AI-powered precursor quantification in atmospheric pressure plasma jet thin film deposition via optical emission spectroscopy," Plasma Sources Science and Technology, vol.33, no.10, 105015, October 15, 2024. online 

12. Jing-Fang Cai, Ya-Chun Hsu, Yu-Chen Yen, Yun-Chung Lee, Bernie Peyton, Mei-Jiau Huang, Hon-Tsen Yu*, and Jia-Yang Juang*, "Folding angle and wing flexibility influence the flight performance of origami winged fruits," Nonlinear Dynamics, vol.112, pp.10995-11011, May 14, 2024. online   pdf   YouTube

13. Chih-Wen Ou Yang, Shao-Yi Yu, Che-Wei Chan, Chien-Yao Tseng, Jing-Fang Cai, Han-Pang Huang, and Jia-Yang Juang*, "Enhancing the versatility and performance of soft robotic grippers, hands, and crawling robots through three-dimensional-printed multifunctional buckling joints," Soft Robotics, vol.11, no.5, pp.741-754, October 1, 2024. online   pdf   YouTube

14. Stephanie Yuan Chia, Yi-Ting Fang, Yi-Ting Su, Pei-Yu Tsai, Chia Hsieh, Shu-Han Tsao, Jia-Yang Juang, Chih-Ming Hung*, Mao-Ning Tuanmu*, "A global database of bird nest traits," Scientific Data, 10, 923, December 21, 2023. online

15. Yu-Tang Luo, Zhe-Han Zhou, Cheng-Yang Wu, Li-Ching Chiu, and Jia-Yang Juang*, "Analysis of hazy Ga- and Zr-co-doped zinc oxide films prepared with atmospheric pressure plasma jet systems," Nanomaterials, 13(19), 2691, October 2023. online

16. Yu-Tang Luo, Zhe-Han Zhou, Zhao-Bo Huang, Jia-Yang Juang, and Li Xu*, "Facile and versatile fabrication process for AgNW/GZO transparent composite electrodes for photovoltaic applications by atmospheric pressure plasma jet," Applied Surface Science, vol.635, 157767, October 30, 2023. online   pdf

17. Hsiao-Jou Wu, Yu-Chien Tseng+, Shu-Han Tsao, Pei-Lin Chiang, Wei-Yu Tai, Hsin-I Hsieh, Hon-Tsen Yu, and Jia-Yang Juang*, "A comparative study on the microstructures, mineral content, and mechanical properties of non-avian reptilian eggshells," Biology, 12, 688, May 7, 2023. online

18. Ying Lin+, Yi-Xian Xu+, and Jia-Yang Juang*, "Single-actuator soft robot for in-pipe crawling," Soft Robotics, vol.10, no.1, pp.174-186, February 14, 2023. online   pdf   YouTube

19. Yi-Hung Chiu+, Ya-Hsuan Liao+, and Jia-Yang Juang*, "Designing bioinspired composite structures via genetic algorithm and conditional variational autoencoder,"  Polymers, 15(2), 281, January 5, 2023. online   (Most Viewed Articles)

20. Yun-Chung Lee+, Yu-Chen Chen+, Hsin-Tien Lin, Li Xu, Ming-Tsang Lee*, and Jia-Yang Juang*, "Maskless deposition of patterned transparent conductive oxides via laser-assisted atmospheric pressure plasma jet," Journal of Alloys and Compounds, vol.931, 167607, January 10, 2023.  online   pdf   

21. Chih-Ming Hung+, Shu-Han Tsao+, Pei-Lin Chiang, Shang-Ping Wu, Mao-Ning Tuanmu*, and Jia-Yang Juang*, "Functional connections between bird eggshell stiffness and nest characteristics through risk of egg collision in nests," Ecology Letters, vol.25, no.6, pp.1421-1431, June 1, 2022. online

22. Yun-Chung Lee and Jia-Yang Juang*, "Single-step process for transparent conductive ZnO:Ga films with uniform ultrahigh haze by oblique angle deposition," Journal of the European Ceramic Society, vol.42, no.7, pp.3234-3244, July 1, 2022. online   pdf.

23. Cheng-Yang Wu+, Li-Ching Chiu+, and Jia-Yang Juang*, "High haze Ga and Zr co-doped zinc oxide transparent electrodes for photovoltaic applications," Journal of Alloys and Compounds, vol.901, 163678, April 25, 2022. online   pdf

24. Ping-Chia Hsu and Jia-Yang Juang*, "Facile preparation of hazy Ga-doped ZnO electrodes by atmospheric pressure plasma jet," Applied Surface Science, vol.580, 152232, April 1, 2022. online   pdf

25. Ping-Chia Hsu, Ahmad Abror Saragih, Mei-Jiau Huang*, and Jia-Yang Juang*, "New machine functions using waste heat recovery: A case study of atmospheric pressure plasma jet," Energy, vol.239, 122372, January 15, 2022. online   pdf

26. Pei-Lin Chiang+, Yu-Chien Tseng+, Hsiao-Jou Wu, Shu-Han Tsao, Shang-Ping Wu, Wei-Cheng Wang, Hsin-I Hsieh, and Jia-Yang Juang*, "Elastic moduli of avian eggshell," Biology, 10(10), 989, September 30, 2021. online

27. An Yen+, Hsiao-Jou Wu+, Pin-Yi Chen, Hon-Tsen Yu, and Jia-Yang Juang*, "Egg incubation mechanics of giant birds," Biology, 10(8), 738, August 2021. online   cover story (台大校訊網頁版) (台大首頁焦點新聞) (NTU Spotlight) (Wikipedia)

28. Yi-Xian Xu and Jia-Yang Juang*, "Measurement of nonlinear Poisson's ratio of thermoplastic polyurethanes under cyclic softening using 2D digital image correlation," Polymers, 13(9), 1498, May 2021. online

29. Yu-Chien Tseng, Pierre Amon, Loan Dolbachian, and Jia-Yang Juang*, "Guided buckling of elastoplastic spherical shells induced by indenters of various shapes," Extreme Mechanics Letters, vol. 44, 101247, April 2021. online   pdf

30. Mei-Jiau Huang*, Yu-Hsuan Lin, Ping-Chia Hsu, and Jia-Yang Juang*, "A TEG-based waste heat recovery system for atmospheric pressure plasma jets: model prediction and experimental verification," Applied Thermal Engineering, vol.189, 116693, May 5, 2021. online   pdf

31. Yu-Chen Chen, Ping-Chia Hsu, Li Xu*, and Jia-Yang Juang*, "Simultaneous enhancement of electrical conductivity, uniformity, and near-infrared transmittance via laser annealing on ZnO:Ga films deposited by atmospheric pressure plasma jet," Journal of Alloys and Compounds, vol.857, 157697, March 15, 2021. online   pdf

32. Chia-Ling Hung+, Ying-Chuan Kao+, and Jia-Yang Juang*, "Dielectrophoretic crossover frequency of individual pearl chains formed by bonded colloidal spheres," Sensors and Actuators B: Chemical, vol. 327, 128888, January 15, 2021. online   pdf

33. Yu-Wei Lu+, Chieh Sun+, Ying-Chuan Kao+, Chia-Ling Hung, and Jia-Yang Juang*, "Dielectrophoretic crossover frequency of single particles: Quantifying the effect of surface functional groups and electrohydrodynamic flow drag force,"  Nanomaterials, 10(7), 1364, July 2020. online

34. Chao-Yung Yeh, Chen-Ya Chen, and Jia-Yang Juang*, “Soft hopping and crawling robot for in-pipe traveling,” Extreme Mechanics Letters, vol. 39, 100854, September 2020. online   pdf

35. Yan-San Huang*, Pei-Lin Chiang, Ying-Chuan Kao, Fu-Lan Hsu, and Jia-Yang Juang*, “Cracking failure of curved hollow tree trunks,” Royal Society Open Science, 7: 200203, March 11, 2020. online

36. Pin-Han Chou, Jing-Chi Huang, Kuo-Long Pan*, and Jia-Yang Juang*, “Enhancement of electrical conductivity of transparent Ga-doped zinc oxide films via quench reduction in an atmospheric pressure plasma jet,” Physical Review Applied, vol. 12, 034050, 2019. online   pdf

37. Wen-Kai Chen, Jing-Chi Huang, Yu-Chen Chen, Ming-Tsang Lee, and Jia-Yang Juang*, “Deposition of highly transparent and conductive Ga-doped zinc oxide films on tilted substrates by atmospheric pressure plasma jet,” Journal of Alloys and Compounds, vol.802, pp.458-466, September 2019. online   pdf

38. Chao-Yung Yeh+, Shih-Chien Chou+, Hsin-Wei Huang, Hung-Chen Yu, and Jia-Yang Juang*, "Tube-crawling soft robots driven by multistable buckling mechanics," Extreme Mechanics Letters, vol.26, pp.61-68, January 2019. online   pdf

39. Jia-Yang Juang*, Hsin-Tien Lin, Chun-Tang Liang, Pei-Rong Li, Wen-Kai Chen, Yu-Yi Chen, and Kuo-Long Pan, “Effect of ambient air flow on resistivity uniformity of transparent Ga-doped ZnO film deposited by atmospheric pressure plasma jets,” Journal of Alloys and Compounds, vol.766, pp.868-875, Oct. 2018. online   pdf

40. Michio Aoki and Jia-Yang Juang*, “Forming three-dimensional closed shapes from two dimensional soft ribbons by controlled buckling,” Royal Society Open Science, 5: 171962, Feb. 2018. online, video, Royal Society Publishing Facebook  

41. Jia-Yang Juang*, Pin-Yi Chen+, Da-Chang Yang+, Shang-Ping Wu, Yen An, and Hsin-I Hsieh, “The avian egg exhibits general allometric invariances in mechanical design,” Scientific Reports, 7, 14205, Oct. 2017. online (台大校訊網頁版) (台大校訊印刷版) (台大首頁焦點新聞) (NTU Spotlight) 

42. Che-Kai Yeh and Jia-Yang Juang*, “Dimensionless analysis and prediction of dielectrophoretic crossover frequency of spherical particles,” AIP Advances, vol.7, 065304, June 2017. online

43. Chang-Kai Chao, Jia-Yang Juang, and Shana Smith*, ”Optimization of unequal-active-and-passive-area piezoelectric unimorph cantilevers with collisions for ultra-thin keyboard design," Journal of Vibroengineering, vol.19, issue 7, pp.4816-4826, Nov. 2017. online   pdf

44. Yan-San Huang*, Fu-Lan Hsu, Chin-Mei Lee, and Jia-Yang Juang*, “ Failure mechanism of hollow tree trunks due to cross-sectional flattening,” Royal Society Open Science, 4: 160972, Apr. 2017. online

45. Yu-Yi Chen and Jia-Yang Juang*, “Enhancement of Ga-doped Zinc Oxide film properties and deposition rate by multiple deposition using atmospheric pressure plasma jet,” Journal of Alloys and Compounds, vol.694, pp.452-458, Feb. 2017. online   pdf

46. Jia-Yang Juang* and Jinglin Zheng, “Thermal analysis of continuous and patterned multilayer films in the presence of a nanoscale hot spot,” AIP Advances, vol.6, 105102, Oct. 2016. online

47. Yu-Yi Chen and Jia-Yang Juang*, “Finite element analysis and equivalent parallel-resistance model for conductive multilayer thin films,” Measurement Science and Technology, vol.27, pp.074006, May 2016. online   pdf

48. Ping-You Weng, I-An Chen, Che-Kai Yeh, Pin-Yi Chen, and Jia-Yang Juang*, ”Size-dependent dielectrophoretic crossover frequency of spherical particles," Biomicrofluidics, vol.10, pp.011909, 2016. online   pdf

49. Chen-En Wu, Keng-Hui Lin, and Jia-Yang Juang*, ”Hertzian load-displacement relation holds for spherical indentation on soft elastic solids undergoing large deformations," Tribology International, vol.97, pp.71-76, May 2016. online   pdf

50. Tung-Sheng Chou, Hsin-Tien Lin, Yu-Yi Chen, Kuo-Long Pan, and Jia-Yang Juang*, ”Effect of main gas and carrier gas on ZnO thin films deposited by atmospheric pressure plasma jet", Thin Solid Films, vol.594, Part B, pp.282-286, Nov. 2015. online   pdf

51. Jia-Yang Juang*, Tung-Sheng Chou, Hsin-Tien Lin, Yuan-Fang Chou and Chih-Chiang Weng, ”Trajectory effect on the properties of large area ZnO thin films deposited by atmospheric pressure plasma jet", Applied Surface Science, vol.314, pp.1074-1081, Sep. 2014. online   pdf

52. Jia-Yang Juang*, Wei Wu and K.-T. Lin, ”Tribological impact of touchdown detection on bit patterned media robustness",  Microsystem Technologies, vol.20, no.8, pp.1745-1751, Aug. 2014. online   pdf

53. Jia-Yang Juang*, ”Transient characteristics of nanoscale air bearings subjected to Joule heating," Tribology Letters, vol.53, no.1, pp.255-260, Jan. 2014. online   pdf

54. Jia-Yang Juang* and Kuan-Te Lin, ”Touchdown of flying recording head sliders on continuous and patterned media," IEEE Transactions on Magnetics, vol.49, no.6, pp.2477-2482, June 2013. online   pdf

55. L. Huang*, B. Stipe, M. Staffaroni, Jia-Yang Juang, T. Hirano, E. Schreck and F.-Y. Huang, ”HAMR thermal modeling including media hot spot," IEEE Transactions on Magnetics, vol.49, no.6, pp.2565-2568, June 2013. online   pdf

56. Jia-Yang Juang*, Joel Forest and F.-Y. Huang, ”Magnetic head protrusion profiles and wear pattern of thermal flying-height control sliders with different heater designs," IEEE Transactions on Magnetics, vol.47, no.10, pp.3437-3440, Oct. 2011. online   pdf

57. L. Zhang*, Y.K. Takahashi, K. Hono, B.C. Stipe, Jia-Yang Juang and M. Grobis, “FePtAg-C nanogranular film as thermally-assisted magnetic recording (TAR) media,” IEEE Transactions on Magnetics, vol.47, no.10, pp.4062-4065, Oct. 2011. online   pdf

58. C.-P. Ku*, Jia-Yang Juang, X. Sun, L. Huang and F.-Y. Huang, “High frequency radial mode vibration in hard disk drive,” IEEE Transactions on Magnetics, vol.47, no.7, pp.1893-1898, Jul. 2011. online   pdf

59. L. Zhang*, Y.K. Takahashi, K. Hono, B.C. Stipe, Jia-Yang Juang and M. Grobis, “L10-ordered FePtAg-C granular thin film for thermally-assisted magnetic recording media (invited paper),” Journal of Applied Physics, vol.109, no.7, pp. 07B703, Apr. 2011. online   pdf

60. Jia-Yang Juang*, T. Nakamura, B. Knigge, Y. Luo, W.C. Hsiao, K. Kuroki, F.Y. Huang and P. Baumgart, “Numerical and experimental analyses of nanometer-scale flying height control of magnetic head with heating element,” IEEE Transactions on Magnetics, vol.44, no.11, part 2, pp.3679-3682, Nov. 2008. online   pdf

61. T.E. Karis*, X.-C. Guo and Jia-Yang Juang, “Dynamics in the bridged state of a magnetic recording slider,” Tribology Letters, vol.30, no.2, pp.123-140, 2008. online   pdf

62. Jia-Yang Juang* and D.B. Bogy, “Air bearing effects on actuated thermal pole-tip protrusion for hard disk drives,” ASME Journal of Tribology, vol.129, no.3, pp.570-578, Jul. 2007. online   pdf

63. Jia-Yang Juang*, R.P. Ambekar, D.B. Bogy and C.S. Bhatia, “Fabrication and experimental study of Al­2O3-TiC sliders with piezoelectric nanoactuators for flying height control,” Microsystem Technologies, vol.13, no.8-10, pp.751-757, May 2007. online   pdf

64. Jia-Yang Juang*, D.B. Bogy and C.S. Bhatia, “Design and dynamics of flying height control slider with piezoelectric nanoactuator in hard disk drives,” ASME Journal of Tribology, vol.129, no.1, pp.161-170, Jan. 2007. online   pdf

65. Jia-Yang Juang*, H. Kubotera and D.B. Bogy, “Effects of track-seeking motion on the flying attitudes of ultralow flying sliders,” IEEE Transactions on Magnetics, vol.42, no.10, pp.2522-2524, Oct. 2006. pdf

66. Jia-Yang Juang*, D. Chen and D.B. Bogy, “Alternate Air Bearing Slider Designs for Areal Density of 1 Tbit/in2,” IEEE Transactions on Magnetics, vol. 42, no. 2, pp. 241-246, Feb. 2006. online   pdf

67. Jia-Yang Juang* and D.B. Bogy, “Nonlinear compensator design for active sliders to suppress head-disk spacing modulation in hard disk drive,” IEEE/ASME Transactions on Mechatronics, vol. 11, no. 3, pp. 256-264, Jun. 2006. online   pdf

68. Jia-Yang Juang* and D.B. Bogy, “Controlled flying proximity sliders for head-media spacing variation suppression in ultra-low flying air bearings,” IEEE Transaction on Magnetics, vol. 41, no. 10, pp. 3052-3054, Oct. 2005. online   pdf

69. Jia-Yang Juang* and D.B. Bogy, “Nanotechnology advances & applications in information storage,” Microsystem Technologies, vol. 11, pp. 950-957, 2005. online   pdf

70. Jia-Yang Juang*, Y.-C. Li, and H.-P. Huang, “Estimation of lot processing time in an IC fab,” International Journal of Industrial Engineering-Theory Applications and Practice, vol. 6, pp. 317-324, 1999.

 Working Papers:

1. Yu-Chen Yen+, Yo-Jiun Chen+, Jing-Fang Cai, Ya-Chen Hsu, Chun-Neng Wang*, and Jia-Yang Juang*, "Shape transformation via 3D printing inspired by seed pods"

2. Yi-Lin Tsai+, Yu-Chien Tseng+, Shu-Han Tsao, Ying-Chuan Kao, Pei-Lin Chiang, Wei-Cheng Wang, Hsin-I Hsieh, and Jia-Yang Juang*, "Cracking of avian eggs"

 International Conference Papers (Total: 57)

1. Chih-Yun Chou, Lu-Chi Hsu, and Jia-Yang Juang, “Flexible AgNW/GZO composite transparent electrode deposited by atmospheric pressure plasma jet,” The 48th National Conference on Theoretical and Applied Mechanics (CTAM 2024) & The 3rd International Conference on Mechanics (ICM), November 29 - 30, 2024, Hsinchu, Taiwan.

2. Yun-Yueh Yu, Yung-Hsu Chen, Pei-Lin Hou, and Jia-Yang Juang, “Intelligent Additive Manufacturing: Fabrication of Complex 3D Curved Structures via Fully Convolutional Network and 4D Printing Technology,” The 21st International Conference on Automation Technology (Automation 2024), November 22-24, Taipei, Taiwan.

3. Chih-Yun Chou, Yu-Tang Luo, Ying-Chin Yeh, Zhang-Bo Huang, Zhehan Zhou, Li Xu, and Jia-Yang Juang, “Gallium-doped zinc oxide with silver nanowire transparent electrode for photovoltaic applications by atmospheric pressure plasma jet,” The 32th ASME Annual Conference on Information Storage and Processing Systems (ISPS 2023), August 28 - 29, 2023, Milpitas, CA, USA. (Graduate Student Fellowship)

4. Yan-Ting Lin, Yi-Hung Chiu, Yi-Xian Xu, Yu-Ting Huang, and Jia-Yang Juang, “Multi-material 4D printing technology of masks via the inverse design of fully convolutional network models,” The 32th ASME Annual Conference on Information Storage and Processing Systems (ISPS 2023), August 28 - 29, 2023, Milpitas, CA, USA. (Graduate Student Fellowship)

5. Mei-Jiau Huang, Yu-Hsuan Lin, Ping-Chia Hsu, and Jia-Yang Juang, "A TEG-based waste heat recovery system for atmospheric pressure plasma jets,” 19th European Conference on Thermoelectrics (ECT 2023), September 17-21, 2023, Prague, Czech Republic.

6. Yan-Ting Lin and Jia-Yang Juang, “A bi-directional soft pneumatic climbing robot,” 2022 JSME-IIP/ASME-ISPS Joint International Conference on Micromechatronics for Information and Precision Equipment (MIPE 2022), August 28-31, 2022, Nagoya University, Japan. (Hybrid event)

7. Chi-Yi Tsai and Jia-Yang Juang, “Untethered electromagnetic tube climbing robot,” 2022 JSME-IIP/ASME-ISPS Joint International Conference on Micromechatronics for Information and Precision Equipment (MIPE 2022), August 28-31, 2022, Nagoya University, Japan. (Hybrid event)

8. Cheng-Tang Wu, Li-Ching Chiu, and Jia-Yang Juang, “High haze Ga and Zr co-doped zinc oxide transparent electrodes preparation by atmospheric pressure plasma jet for photovoltaic applications,” 2022 JSME-IIP/ASME-ISPS Joint International Conference on Micromechatronics for Information and Precision Equipment (MIPE 2022), August 28-31, 2022, Nagoya University, Japan. (Hybrid event)

9. Yun-Chung Lee and Jia-Yang Juang, “Using oblique angle deposition to form transparent conductive GZO films with uniform ultrahigh haze in single-step process,” 2022 JSME-IIP/ASME-ISPS Joint International Conference on Micromechatronics for Information and Precision Equipment (MIPE 2022), August 28-31, 2022, Nagoya University, Japan. (Hybrid event)

10. Yu-Tang Luo and Jia-Yang Juang, “A facile and versatile fabrication process for AgNW/GZO heterogeneous transparent electrodes for photovoltaic applications by atmospheric pressure plasma jet,” 2022 JSME-IIP/ASME-ISPS Joint International Conference on Micromechatronics for Information and Precision Equipment (MIPE 2022), August 28-31, 2022, Nagoya University, Japan. (Hybrid event)

11. Yu-Chen Yen, Jing-Fang Cai, Ya-Chen Hsu, and Jia-Yang Juang, “Seed-pod-inspired shape transformation via 4D printing,” 15th World Congress on Computational Mechanics & 8th Asian Pacific Congress on Computational Mechanics (WCCM-APCOM 2022), July 31 to August 5, 2022, Yokohama, Japan.

12. Jing-Fang Cai, Ya-Chen Hsu, and Jia-Yang Juang, “Effect of inclination angle of origami winged seeds on the terminal velocity and rotation period,” 15th World Congress on Computational Mechanics & 8th Asian Pacific Congress on Computational Mechanics (WCCM-APCOM 2022), July 31 to August 5, 2022, Yokohama, Japan.

13. Yi-Hung Chiu, Ya-Hsuan Liao, and Jia-Yang Juang, “Designing composite materials via genetic algorithm and conditional Variational autoencoder,” 15th World Congress on Computational Mechanics & 8th Asian Pacific Congress on Computational Mechanics (WCCM-APCOM 2022), July 31 to August 5, 2022, Yokohama, Japan.

14. Jia-Yang Juang, Yi-Xian Xu, Yi-Hung Chiu, Yu-Chen Yen, and Yu-Ting Huang, “Inverse design of face-like 3D surfaces via deep learning,” 15th World Congress on Computational Mechanics & 8th Asian Pacific Congress on Computational Mechanics (WCCM-APCOM 2022), July 31 to August 5, 2022, Yokohama, Japan.

15. Yu-Ting Huang, Yi-Xian Xu, Yi-Hung Chiu, Yu-Chen Yen, and Jia-Yang Juang, “Inverse design of face-like 3D surfaces via multi-material 4D printing,” 15th World Congress on Computational Mechanics & 8th Asian Pacific Congress on Computational Mechanics (WCCM-APCOM 2022), July 31 to August 5, 2022, Yokohama, Japan.

16. Ping-Chia Hsu, Yu-Tang Luo, and Jia-Yang Juang*, “Facile high haze transparent electrode preparation by atmospheric pressure plasma jet for photovoltaic application,” International Thin Films Conference, Taiwan Association for Coating and Thin Film Technology (TACT 2021), November 15 - 18, 2021, Virtual Conference.  (Certificate of Excellence)

17. Yun-Chung Lee, Yu-Chen Chen, and Jia-Yang Juang*, “Transparent conductive GZO patterns fabricated by CO2 laser-assisted atmospheric pressure plasma jet,” The 30th ASME Annual Conference on Information Storage and Processing Systems (ISPS 2021), June 2 - 3, 2021, Virtual Conference.

18. Shao-Yi Yu, Chih-Wen Ou Yang, and Jia-Yang Juang*, “Vacuum-actuated buckling-based fingers,” The 30th ASME Annual Conference on Information Storage and Processing Systems (ISPS 2021), June 2 - 3, 2021, Virtual Conference.

19. Ying Lin, Yi-Xian Xu, and Jia-Yang Juang, “Single-actuator soft robot for in-pipe traveling,” International Conference on Advanced Robotics and Intelligent Systems (ARIS 2020), August 19 - 21, 2020, Taipei, Taiwan.

20. Chao-Yung Yeh, Chen-Ya Chen, and Jia-Yang Juang*, “Soft in-pipe crawling robot,” The 29th ASME Annual Conference on Information Storage and Processing Systems (ISPS 2020), June 25 - 26, 2020, Santa Clara, CA, USA. (virtual conference) (Best Paper Award)

21. Chao-Yung Yeh, Chen-Ya Chen, and Jia-Yang Juang, “Soft jumping and crawling robot for in-pipe travelling,” The 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2020), July 6 - 10, 2020, Boston, Massachusetts, USA. (accepted but withdrawn due to COVID-19 pandemic)

22. Yilin Tsai, Shu-Han Tsao, Pei-Lin Chiang, and Jia-Yang Juang, “Crack deflection in the porous layer of Emu's eggshell,” The Asian Pacific Congress on Computational Mechanics (APCOM 2019), December 18 - 21, 2019, Taipei, Taiwan.

23. Ying-Chuan Kao, Yun-Wei Lu, Chieh Sun, Chia-Ling Hung, and Jia-Yang Juang, “Precision measurement and comprehensive analysis of dielectrophoretic crossover behavior of micro-particles,” The 28th ASME Annual Conference on Information Storage and Processing Systems (ISPS 2019), June 27 - 28, 2019, San Diego, CA, USA. (Graduate Student Fellowship)

24. Yu-Chen Chen, Wen-Kai Chen, Jing-Chi Huang, and Jia-Yang Juang, “Deposition of highly transparent and conductive films on tilted substrates by atmospheric pressure plasma jet,” The 28th ASME Annual Conference on Information Storage and Processing Systems (ISPS 2019), June 27 - 28, 2019, San Diego, CA, USA. (Graduate Student Scholarship, Best Paper Award)

25. Jia-Yang Juang, Shang-Ping Wu, Pei-Lin Chiang, Shu-Han Tsao, and Hsin-I Hsieh, “Mechanics of avian eggshells,” The 2nd International Conference on Mechanics (ICM 2018), Oct. 15 - 18, 2018, Yilan, Taiwan.

26. Michio Aoki and Jia-Yang Juang, “Forming three-dimensional hollow shapes from two-dimensional elastic ribbons by controlled buckling,” The 3rd International Conference on Inventions (ICI 2017), Sep. 29 - Oct. 2, 2017, Sun Moon Lake, Taiwan.

27. Chun-Tang Liang, Yu-Yi Chen, Hsin-Tien Lin, Kuo-Long Pan, and Jia-Yang Juang, “Effect of ambient air flow on the resistivity uniformity of Ga-doped ZnO film deposited in open air,” 13th International Symposium on Measurement and Intelligent Instruments (ISMTII 2017), Sep. 22-25, 2017, Xian, Shanxi, China.

28. Yun-Wei Lu, Che-Kai Yeh, Chieh Sun, and Jia-Yang Juang, “Size-dependent dielectrophoretic crossover frequency of spherical microparticles varies with different medium conductivity,” The 7th International Conference on Optofluidics 2017 (Optofluidics 2017), July 25-28, 2017, Singapore.

29. Y. F. Wang, Y. Lu, G. Chen and Jia-Yang Juang, “Control of uncertain vibrations of TFC active slider,” ASME Information Storage and Processing Systems Conference (ISPS 2016), June 20-21, 2016, San Jose, CA, USA.

30. Pin-Yi Chen and Jia-Yang Juang, “Rigidity and elastic modulus of the avian egg,” 10th World Biomaterials Congress (WBC 2016), May 17-22, 2016, Montreal, QC Canada.

31. An Yen, Hung-Huei Lee, Yi-Ting Chang, Keng-Hui Lin and Jia-Yang Juang, “Simulation of cellular traction force reconstruction using different marker beads densities,” 10th World Biomaterials Congress (WBC 2016), May 17-22, 2016, Montreal, QC Canada. (MOST Student Travel Grant)

32. Yi-Ting Chang, Hung-Huei Lee, Hsuan Yang, Keng-Hui Lin and Jia-Yang Juang, “Effect of embedded beads distribution on cellular traction force analysis,” 10th World Biomaterials Congress (WBC 2016), May 17-22, 2016, Montreal, QC Canada. (MOST Student Travel Grant)

33. An Yen, Hung-Huei Lee, Keng-Hui Lin, and Jia-Yang Juang, “Traction forces exerted by cells in spherical holes,” The 39th National Conference on Theoretical and Applied Mechanics (CTAM 2015), November 20-21, 2015, Taipei, Taiwan.

34. Ping-You Weng, I-An Chen, Pin-Yi Chen and Jia-Yang Juang, “Size-dependent dielectrophoretic crossover frequency of colloidal particles,” The 5th International Conference on Optofluidics 2015 (Optofluidics 2015), July 26-29, 2015, Taipei, Taiwan. (Best Paper Nomination)

35. Yu-Yi Chen and Jia-Yang Juang, “Modeling of sheet resistance of multilayered thin films measured by four point probe,” 12th International Symposium on Measurement and Intelligent Instruments (ISMTII 2015), Sep. 22-25, 2015, Taipei, Taiwan.

36. Chen-En Wu, Keng-Hui Lin and Jia-Yang Juang, “Extendibility of Hertz contact theory in large indentation of an elastic half-space by a rigid sphere,” 2015 JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment (MIPE 2015), June 14-17, 2015, Kobe, Japan. (MOST Student Travel Grant)

37. Jia-Yang Juang, Hsin-Tien Lin, Tung-Shen Chou, Kuo-Long Pan and Chih-Chiang Weng, “Effects of main gas and carrier gas on ZnO thin films deposited by atmosphere pressure plasma jet,” 5th International Symposium on Transparent Conductive Materials (TCM 2014), Oct. 12-17, 2014, Platanias - Chania, Crete, Greece. (MOST Student Travel Grant)

38. Hung-Huei Lee, Hsuan Yang, Jia-Yang Juang, and Keng-Hei Lin, “Three-dimensional cellular traction force microscopy based on finite-element method,” 2014 IEEE International Conference on Automation Science and Engineering (IEEE CASE 2014), Aug. 18-22, 2014, Taipei, Taiwan. (Invited paper)

39. Wei Wu and Jia-Yang Juang, “Three-dimensional finite element analysis of contact phenomena on patterned and planarized media,” 2014 Proc. INTERMAG Conf, May 4 - 8, 2014, Dresden, Germany. (IEEE Student Travel Grant)

40. T.-S. Chou, Jia-Yang Juang, H.-T. Lin, Y.-F. Chou, and C.-C. Weng, “Trajectory effects of atmosphere pressure plasma jet deposition on the properties of large area ZnO thin films,” The 12th International Conference on Automation Technology (Automation 2013), Nov. 1-3, 2013, Tainan, Taiwan.

41. Jia-Yang Juang and K.-T. Lin, “Impact of touchdown detection on bit patterned media robustness,” ASME 2013 Conference on Information Storage and Processing Systems (ISPS2013), June 24-25, 2013, Santa Clara, CA, USA.

42. Jia-Yang Juang and Kuan-Te Lin, “Touchdown of flying recording head sliders on continuous and patterned media,” The Asia-Pacific Magnetic Recording Conference 2012, Oct. 31-Nov. 2, 2012, Singapore. (Invited Paper)

43. Jia-Yang Juang and F.-Y. Huang, “Transient responses of magnetic sliders with thermal flying height control,” 2012 Proc. INTERMAG Conf, May 7 - 11, 2012, Vancouver, Canada.

44. Jia-Yang Juang, J. Forrest and F.-Y. Huang, “Magnetic head protrusion profiles and wear pattern of thermal flying-height control sliders with different heater designs,” 2011 Proc. INTERMAG Conf, April 25 - 29, 2011, Taipei, Taiwan.

45. L. Zhang, Y.K. Takahashi, K. Hono, B.C. Stipe, Jia-Yang Juang and M. Grobis, “FePtAg-C nanogranular film as thermally-assisted magnetic recording (TAR) media,” 2011 Proc. INTERMAG Conf, April 25 - 29, 2011, Taipei, Taiwan.

46. C.-P.R. Ku, Jia-Yang Juang, X. Sun, L. Huang and F.-Y. Huang, “High frequency radial mode vibration in hard disk drives,” The Asia-Pacific Magnetic Recording Conference 2010, Nov. 10-12, 2010, Singapore. (Invited Paper)

47. Jia-Yang Juang, T. Nakamura, B. Knigge, Y. Luo, W.C. Hsiao, K. Kuroki, F.Y. Huang and P. Baumgart, ”Numerical and experimental analyses of nanometer-scale flying height control of magnetic head with heating element," 2008 Proc. INTERMAG Conf, May 8 - 12, 2008, Madrid, Spain.

48. B. Knigge, A. Moser and Jia-Yang Juang, “Nonlinear thermal protrusion and slider disk contact forces,” 2007 ASME/STLE International Joint Tribology Conference, Oct. 22-24, San Diego, CA, USA.

49. Jia-Yang Juang, D.B. Bogy and C.S. Bhatia, “Numerical and experimental study of an Al2O3-TiC slider with a piezoelectric nanoactuator," 2006 ASME/JSME Joint Conf. on Micromechatronics for Information and Precision Equipment (MIPE), June 21-23, 2006, Santa Clara, California.

50. Jia-Yang Juang, H. Kubotera and D.B. Bogy, “Effects of track-seeking motion on the flying attitudes of ultralow flying sliders,” 2006 Proc. INTERMAG Conf, May 8 - 12, 2006, San Diego, California.

51. Jia-Yang Juang, D. Chen and D.B. Bogy, “Alternate air bearing slider designs for areal density of 1 Tbit/in2,” 2005 Proc. The Magnetic Recording Conf (TMRC), August 15 - 17, 2005, Stanford University, California. (Invited Paper)

52. Jia-Yang Juang and D.B. Bogy, “Modeling and design of controlled flying proximity sliders for head-media spacing variation suppression in ultra-low flying air bearings,” 2005 Proc. INTERMAG Conf, April 4 - 8, 2005, Nagoya, Japan.

53. D.B. Bogy, V. Gupta and Jia-Yang Juang, “Nanoscale stability and active control in hard disk drives,” IEEE International Symposium on Micromechatronics and Human Science, Oct. 31 - Nov.3, 2004, Nagoya, Japan. (Invited Paper)

54. Jia-Yang Juang and D.B. Bogy, “Nonlinear compensator design of active proximity sliders for head-disk spacing variation suppression in 3-nm air bearings,” Proceedings of the 3rd Annual Integrated Nanosystems, Sep. 22-24, 2004, Pasadena, California.

55. Jia-Yang Juang and D.B. Bogy, “Nanotechnology advances & applications in information storage,” 2003 JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment, June 16-18, 2003, Yokohama, Japan. (Invited Paper)

56. Jia-Yang Juang and H.P. Huang, “Queueing network analysis for an IC foundry,” Proceedings-IEEE International Conference on Robotics and Automation ICRA 2000, v4, pp. 3389-3394, 2000.

57. Jia-Yang Juang, C.F. Yeh and H.P. Huang, “Dynamic average method for cycle time estimator in an IC fab,” 1998 Semiconductor Manufacturing Technology WorkShop Taiwan, IEEE Electron Devices Society Taipei Chapter, 1998.

Domestic Conference Papers (Total: 4)

1. C.-W. Ou Yang, S.-Y. Yu, C.-W. Chan, and J.-Y. Juang, ”Buckling-actuated soft robotic fingers for versatile grasping,” The 47th National Conference on Theoretical and Applied Mechanics, November 17-18, 2023, Yunlin, Taiwan. 

2. 周芷筠，李允中，莊嘉揚，”雷射輔助噴射式大氣電漿系統：無光罩透明導電圖樣製程”，2023，中華民國力學學會第四十七屆全國力學研討會(CTAM 2023)，雲林，台灣。 

3. 吳筱柔、于宏燦、莊嘉揚，「以力學角度探討恐龍蛋勁度與其接觸孵蛋之可行性」，中華民國地質學會與中華民國地球物理學會110年年會暨學術研討會，11月22、23、24日，台北。

4. Pin-Yi Chen and Jia-Yang Juang, “Mechanical characteristics of the eggshells of five fowl species,” The 39th National Conference on Theoretical and Applied Mechanics (CTAM 2015), November 20-21, 2015, Taipei, Taiwan.（學生論文競賽第二名）

Patents (Total: 18)

1. Jia-Yang Juang and M.-T. Lee, “Method for forming transparent conductive pattern,” Taiwan patent, TW I834267 B, March 1, 2024.

2. T. Hirano, F.-Y. Huang, Jia-Yang Juang, and B.C. Stipe, “Extended cavity VCSEL mounted to substrate with electrical and thermal contact to substrate and optical power directed toward substrate,” US patent, No. 9,053,731, June 9, 2015. pdf

3. F.-Y. Huang, Jia-Yang Juang, H.J. Rosen, B.C. Stipe, T.C. Strand and P.A. van der Heijden, “Magnetic recording disk drive with shingled writing and rectangular optical waveguide for wide-area thermal assistance,” US patent, No. 8,416,646 B2, Apr. 9, 2013. pdf

4. Jia-Yang Juang, T. Reiley and T. Strand, “Laser power sensor for thermally assisted magnetic recording,” US patent, No. 8,406,090 B2, Mar. 26, 2013. pdf 

5. Jia-Yang Juang, H.J. Rosen, B.C. Stipe, T.C. Strand and P.A. van der Heijden, “Magnetic recording disk drive with shingled writing and wide-area thermal assistance,” US patent, No. 8,270,256 B1, September 18, 2012. pdf

6. Jia-Yang Juang, F.Y. Huang and T. Tomita, “Baseplate with recessed region in a hard-disk drive (HDD),” US patent, No. 8,339,732 B2, December 25, 2012. pdf

7. Z. Bandic, Jia-Yang Juang, B. Knigge and R. Payne, “Compliant air bearing slider,” US patent, No. 8,300,360 B2, Oct. 30, 2012. pdf

8. P. Baumgart, Jia-Yang Juang and G.P. Singh, “System for controlling contact location during TFC touchdown and methods thereof,” US patent, No. 8,149,541 B2, Apr. 3, 2012. pdf

9. 莊嘉揚、黃富盈、富田孝史, ”硬盤驅動器和用於在其中使用的底板”，中國專利，專利類型：發明，專利號：20110268953，公開（公告）日：2012.04.04。

10. Jia-Yang Juang, T. Hirano, F.Y. Huang and J. Tian, “An integrated silicon micro-actuator slider,” US patent, No. 8,040,639, October 18, 2011. pdf

11. L. Huang, F.Y. Huang, Jia-Yang Juang and B. Lengsfield, “Combined bulk thermal-assister and bulk eraser,” US patent, No. 8,014,096, September 6, 2011. pdf

12. B. Knigge, Jia-Yang Juang and E. Schreck, “Frictional heating for thermally assisted recording,” US patent, No. 7,542,228, June 2, 2009. pdf

13. Jia-Yang Juang and H.P. Huang, “Performance Measures Prediction System for IC Foundry,” Taiwan, ROC patent, No. 459,269, Oct. 11, 2001.

14. B. Stipe, T. Hirano, Jia-Yang Juang and F.Y. Huang, “Extended cavity VCSEL mounted to substrate with electrical and thermal contact to substrate and optical power directed toward substrate,” US patent pending.

15. B. Stipe, T. Hirano, Jia-Yang Juang and F.Y. Huang, “Front-mounted extended cavity VCSEL for thermally-assisted recording,” US patent pending.

16. B. Stipe, T. Hirano, Jia-Yang Juang and F.Y. Huang, “Contact design and method for front-mounted extended cavity VCSEL,” US patent pending.

17. P. Baumgart, W.C. Hsiao, F.Y. Huang and Jia-Yang Juang, “Protecting magnetic head elements,” US patent pending, 20100007976 A1, Jan. 14, 2010.

18. F.Y. Huang, Jia-Yang Juang and T. Strand, “Neutralizing flying height sensitivity of thermal pole-tip protrusion of magnetic slider,” US patent pending, 20090268335 A1, Oct. 29, 2009.