Bet sizing

To enable the Bet sizing you need to on the General tab enable Bet sizing.

Calculates the size of the bets on the streets. All the values are edited directly in the grid.

Cash:

Rounding bet - configured separately for Cash and Tournament.

Rounding options:

    • 1/100 - to 1 hundredth

    • 1/10 - to 1 tenth

    • 1 - to one

    • BB/10 - to 1 tenth of big blind

    • SB - to 1 small blind

    • BB - to 1 big blind

All-in if bet >= XX% of stack - maximum bet, if bet is obtained greater than or equal to XX% of stack hero. Configured separately for Cash and Tournament.


Tab "1st raise" - calculates to raise preflop, bet postflop.

Grid "Preflop open raise, BB" - bet is calculated in big blinds, depending on the number of players at the start of the hand ("Players at start of hand") and position of the hero at table for each Limper ("+limp"). For example, for a 6max table, you need to set your bets to "Players at start of hand" 2, 3, 4, 5 and 6, since the table can be from 2 to 6 players.

Grid "Postflop bet, pot%" - bet is calculated as a percentage of the pot. Depends from the hero in position (IP) or no (OOP), from the street and the action on preflop:

  • Limp pot

  • Raise pot

  • 3bet pot

  • 4bet+ pot

Tab "Reraise" - calculates to 3bet+ preflop, raise+ postflop.

For each action bet is calculated as the sum of seven multiplications:

    • R - number of Raise = R * Raise

    • Pot% - percentage of pot = Pot% * Pot/100

    • NCR - number of Raise for each coldcall = NCR * NC * Raise

    • NCB - number of BB for each coldcall = NCB * NC * BB

    • OOPR - number of Raise, if hero is out of position = OOPR * Raise

    • OOPB - number of BB, if hero is out of position = OOPB * BB

    • NBB - any number of BB = NBB * BB

when Raise = last raise, Pot = total pot, NC = number of coldcalls, BB = big blind

There are no positions in the grid. But there are columns OOPR and OOPB (if the hero is out of position), which adds to the bet the value defined in these columns. Therefore, you can only set up two reraise options (hero in position or out of position) for each row in the grid.

For example, if the hero is in position preflop and you need to make 3bet 3x, then in the "Preflop, 3bet" row in the "R" column, make the value 3. If out of position and you need to make 3bet 4x, then in the "OOPR" column, make the value 1 ( 4 - 3 = 1). All other values on this row must be 0.

Tournament:

Settings grid "Postflop bet, pot%" and tab "Reraise" for Tournament are the same as for Cash.

Grid "Preflop open raise, BB" - bet is calculated in big blinds, depending on the number of players at the start of the hand ("Players at start of hand") and position of the hero at table for each Limper ("+limp"). For example, for a 6max table, you need to set your bets to "Players at start of hand" 2, 3, 4, 5 and 6, since the table can be from 2 to 6 players.

For Tournament, you can add, clone, edit and delete (except for "any") levels. Type levels you can choose from:

    • Blinds - blinds level

    • eStack - effective stack in BB

    • esStack - effective stack in BB at start of hand

    • esaStack - effective stack in Adj BB at start of hand, where Adj BB = 2/3 * (BB + SB + Ante * number of players)

Checking levels starts from the top down. For example eStack (picture above), if the effective stack is more than 30 BB, then the data will be taken from the row with the value "30". If the value of the effective stack is 15 BB, then the values will be taken from the row with the value "10" as 15 more than 10 and less than 20.

If you don't add additional levels, the values will always be taken with the string value "any".

Button "Add" adds the current type of level:

You can change the default level for all positions of the stake and the amount of BB for each Limper.

Button "Clone" clones the current level:

You can modify the level value.

Button "Edit" edits the current level:

You can change the value of the level. If you mark checkbox then you can change for all items size of bet and the amount of BB for each Limper.

Edit level "any":

You can change for all positions of bet and the amount of BB for each Limper.

Fixed bets can be configured on the tab "Table - Hot keys - 2"