Model: DFC CORE+ (Toptica) 

Description

• Center wavelength: 1560 nm (20 nm of 3-dB bandwidth) 

• Wavelength extension: 633 nm (for Iodine HeNe laser calibration) and 1542 nm (for C2H2 laser calibration)

• Repetition rate: 200 MHz

• Accuracy: 10^-18 or same as reference

• Stability: 8 x 10^-18 in 1 sec or same as reference

Model: FC8004 (Menlo systems)

Description

• Wavelength: 630-850 nm (output 1), 532 and 1064 nm (output 2)

• Repetition rate: 200 MHz

• Accuracy: 10^-14 or same as reference

• Stability: 5 x 10^-15 in 1 sec or same as reference

Model: C-fiber (Menlo systems)

Description

• Center wavelength: 1560 nm +/- 20 nm

• Pulse width: 100 fs

• Repetition rate: 250 MHz

• Repetition rate locked to RF reference.

Model: ULN15TK

Description

• Center wavelength of 1550 nm

• 100 Hz Linewidth (Lorentzian) with 70 dB Typical SMSR

• Relative Intensity Noise (RIN) of -160 dBc/Hz

• Typical Output Power of 120 mW

• 20 MHz Current Modulation Bandwidth

Model: LLD1530 (Thorlabs) Link 

Description

• Vacuum emission wavelength: 1532.8323 nm

• Frequency stabilized to a NIST-traceable transition of Acetylen (C2H2)

• Stability: +/- 10 MHz (or +/- 0.08 pm)

• Accuracy: +/- 15 MHz (or +/- 0.12 pm)

• Linewidth: < 3 MHz

• Optical power: 10 mW

Model: pulseCheck (APE) Link 

Description

• Scan range: < 50 ps

• Measurable pulse width: 50 fs - 12 ps

• Exchangeable Optics Sets for broadest spectrum coverage from 200 nm to 12 μm

• FROG for complete pulse characterization

• Fiber coupled input (FC/APC)

Model: RLU (Renishaw)

Description

• Laser wavelength: 632.818 nm

• Laser wavelength accuracy: +/- 0.1 ppm over 3 years

• Laser wavelength stability: < +/- 10 ppb @ 1 min.

• Ranging resolution: 20 nm

• Max. velocity: 2 m/s

Model: WS-1000B (II-VI) Link 

Description

• Coverage of C+L band (1524-1613 nm)

• Arbitrary control of attenuation and phase

• Filter bandwidth: 18 GHz

• Group delay control: +/- 15 ps

• Attenuation control: 0 to 40 dB

Model:AQ6370C (Yokogawa) Link 

Description

• Wavelength range: 600 - 1700 nm

• Wavelength accuracy: 0.01 nm

• Wavelength resolution: 0.02 nm

• Amplitude level range: -90 dBm to + 20 dBm

Model: OSA202C (Thorlabs) Link will be introduced in 2025.

Description

• Wavelength range: 600 - 1700 nm

• Spectral resolution: 7.5 GHz

• Max input power: + 10 dBm

• Level sensitivity: -70 dBm/nm

Model: PRO 800 with OSW8104 (Thorlabs) Link 

Description

• Operating wavelength: 1240 - 1610 nm

• Switching time: < 1 ms

• MEMS-based fiber optic switches

• 1x4 optical switching

• 500 mW PM EDFA

• 2 W non-PM EDFA

• 5 W non-PM EDFA

Model: APPH40G (Anapico) Link  will be introduced in 2025.

Description

• Frequency range: 1 MHz to 40 GHz

• Phase noise sensitivity: - 190 dBc/Hz

• Offset frequency range: 0.01 Hz to 100 MHz

• Options with RF spectrum monitoring, time stability analysis, amplitude noise analysis

Model: FS740 (Stanford Research Systems) Link 

Description

• GPS and Rb timebase with a long-term stability of better than 10^-13.

• 12 digit/s frequency counter

• 7 output distribution channels with FS710 Link 

Model: SG384(Stanford Research Systems) Link 

Description

• DC to 6 GHz

• 1 μHz resolution

• AM, FM, PM and sweeps

• -116 dBc/Hz phase nose (20 kHz offset @ 1 GHz)

Model: SC5510A (signalcore) Link 

Description

• Frequency range: 100 MHz to 20 GHz

• Residual phase noise: < - 137 dBc/Hz @ 10 kHz, 1GHz

• Max output power:  +15 dBm

• USB interfaces

Model: SynthHD PRO (v2) (Windfreak) Link 

Description

• 2 ch output

• Frequency range: 10 MHz to 24 GHz

• Residual phase noise: < - 115 dBc/Hz @ 10 kHz, 1GHz

• Max output power: +15 dBm @ 10 GHz, + 8 dB, @ 20 GHz

• USB interfaces

Model: LB1005 (Newport) Link 

Description

• Input voltage noise: < 10 nV/Hz1/2

• Input/output voltage: +/- 10 V

• Bandwidth: > 10 MHz

• Adjustable gain: -40 to + 40 dB

• Adjustable P-I corner frequency range: 10 Hz to 1 MHz

Model: SR780 (Stanford Research Systems) Link 

Description

• DC to 102.4 kHz bandwidth

• 90 dB dynamic range

• FFT resolution: 800 lines

• GPIB and RS-232 interfaces

Model: N9000A (Agilent) Link 

Description

• Frequency range: 9 kHz to 3 GHz

• ±0.5 dB absolute amplitude accuracy

• -145 dBm displayed average noise level (DANL)

Model: 8592L (Hewlett Packard) Link 

Description

• Frequency range: 9 kHz to 22 GHz

• 142 dB amplitude measurement range: -112 dBm to + 30 dBm

• Phase noise of -105 dBc/Hz at 30 kHz offset

Model: Moku:Lab (Liquid Instruments) Link 

Description

• Multifunctional hardware platform based on FPGA

• Input: 2 ch, DC-200 MHz, 500 MSa/s

• Output: 2 ch, DC to 300 MHz, 1 GSa/s

• Fuctions: Lock-in amplifier, waveform generator, oscilloscope, frequency response analyzer, arbitrary waveform genertor, PID controller, phase meter, data logger, spectrum anaylzer, laser lock box, digital filter box, FIR filter builder

Model: SR830 (Stanford Research Systems) Link 

Description

• 100 kHz measurement range

• 0.01 degree phase resolution

• GPIB and RS-232 interfaces

Model: 7265 (EG&G) Link 

Description

• 1 mHz to 250 kHz operation

• 10 us to 100 ks output time constant

• Phase measurement accuracy: < 0.01 deg.

Model: SR600 (Stanford Research Systems) Link 

Description

• Two independent filter channels

• 1 Hz to 100 kHz frequency range

Model: 53220A(Agilent) Link 

Description

• Frequency range: upto 350 MHz

• 12 digits/s resolution, 100 ps timing resolution

• 2 Ch input

Model: ITC4005 (Thorlabs) Link 

Description

• Laser diode current range: 0 to 5 A

• Setting resolution and accuracy: 1 mA and 2 mA

• Noise and ripple: < 250 uA

• External modulation bandwidth: DC to 100 kHz

• Supports TEC current up to +-/ 15 A

Model: MSO-X 4054A (Agilent) Link 

Description

• 500 MHz bandwidth, 5 GSPS sampling rate

• 4 analogue channels, 16 digital channels

• 1,000,000 wfms/s