How Does Arctic 025ZA/B Titanium Heat Pump Work for Pool?

Are you looking to buy a heat pump for pool? If yes, then you should consider purchasing Arctic 025ZA/B Titanium Heat Pump. This heat pump is a chiller and heater in one unit. It can heat and cool your pool by choosing a controller simply. The heat pump is a perfect alternative to hot climates that require a retreat from hot summer heat. 

However, a cold water plunge is a must for most pool users. Now you can take advantage of cold therapeutic benefits. But the swimming pools that are excessively hot can cause issues like chemical imbalance and algae growth. When the temperature of water increases, chlorine gas from swimming pool evaporates.

The Arctic series pool heat pump allows pool owners to minimize temperatures to attain the right levels. In addition, you can avoid hot summer heat waves by chilling your pool. When the temperature reduces, the Arctic Heat Pump will get back to the heating mode. 

Taking Advantage of Heating & Cooling with Arctic 025ZA/B Heat Pump

Arctic 025ZA/B Heat Pump takes the temperature down to minus 4 degree F (-20°C). The air to water heat pump is the most efficient one on the market. It helps in heating and cooling your pool with over 80% savings than traditional heating equipment. This heat pump kit is capable of producing 11KW or 37,532 BTU of heat energy.

This Arctic heat pump works really well in colder weather while allowing you to open your pool much before and close it later. It’s also considered as an energy saving option for pools and hot tubs. The heat pump works up to 104 F temperatures and in 20 F conditions. It’s a perfect heat pump for most pools.

How Does Arctic 025ZA/B Heat Pump Work for Pool? 

The Arctic 025ZA/B Heat Pump harnesses the energy from the air. This system uses an oversized evaporator that removes energy and transfers to the refrigeration unit. It comes with a compressor that compresses the gas for increasing temperature. After that, the hot gas passes through a titanium pool heat exchanger where it’s transferred directly to the pool water. 

When you press the cooling mode, this heat pump unit reverses the direction and chills the pool water. It eliminates heat from the titanium heat exchanger and discharges it out of the evaporator. The Arctic Heat Pump consumes only one third to one fifth of electricity that it produces. It results in energy savings as high as 80% as compared to traditional electric or gas pool or spa heaters. The system comes with built-in gas defrost and drain pan or compressor freeze protection ensuring optimal performance in cold weather. 

Bottom Line –

When you buy Arctic 025ZA/B Heat Pump, you’ll take advantage of features like three modes (heating, cooling, and auto), heat pump digital controller, WI-FI remote control, double rotor DC inverter compressor, spiral titanium heat exchanger, ultra quiet DC brushless fan motor, sound insulation, and highly efficient Fin heat exchanger. For more information about Arctic Heat Pumps, feel free to contact us today at +1 (866) 800-8123.