2180 Wood Forming

1. Watch the YouTube videos

2. You will be using second jig shown in the cutting method on the table saw. 

   1. Create a jig

3. Using a 2 x 4's cut 20 strips at 1/8"  thickness

• 1. Construct single clamping form for bending material

  2. Laminate 5 strips to form a 5/8" thickness

  3. Use heat gun and removes excess glue, then mill edge (jointer).  Then cut width on table saw 

  4. Miter end, then cut to length

  5. Construct slabs for shelves, plane, square then cut to size

  6. Use marking template to cut channels in shelves

  7. Cut channels

  8. Dry fit, mark dowel locations

  9. Drill 1/4" holes in required spots.  (Note!) Drill 1/4" holes 1 1/4" deep in shelves.

  10. Glue, clamp square!

  11. Profile (Sand)

Lamination Shelf

Hockey Stick