the assignment is to Design, simulate, and build a simple electronic device that performs two actions. The device may serve a need at your home, or just fun to build!
I care about this idea because I like the Idea of using recycled material to build a new thing, especially a device like a fan.
Recycled Electric Fan
DC Motor
Buzzer
jumper wires
Resistor
Adapter 5v
old plastic bottle
cardboard
Mini Breadboard
paper cup
GLUE GUN
Step (1): I started placing the Power Source into the Circuit and I chose 5V Power Source because I need to add a buzzer and DC Motor, which will not need more than 5V.
Step (2): I added the buzzer to the Circuit.
Step (3): I added the DC Motor
to the Circuit and connect it to the power source and the buzzer in parallel.
Step (4): I added an On/off switch
to the Circuit and connect it.
Simulation of the device's Circuit
I added the motor to the circuit in a parallel connection to ensure that the motor is in its best condition and tested it with the Buzzer.
The parallel connection is better as the used voltage is the same in all branches, if one component burns the other branches will be working and the total resistance in parallel is less than the smallest resistance in the circuit.
2 - then I made the enclosure I used Recycled cardboard and Recycled plastic then I opened places for the components
and finally, we have this Noisy Fan
The problem I faced was that the buzzer was so quiet after I assembled the device in the beginning and I had to reconnect it again in another place in the same breadboard ( move it from pin to another pin in the breadboard ) and reassemble the device again
By this week I KNEW many different components and I can build real circuits also can build layout circuits in tinkercad.
My team won the cars sumo fight :)
https://fb.watch/jdXwhWe-w1/