Embedded Files
This is my make-through for the week's assignment. Grab a cup of coffee!
PROCESS MAP
PROCESS MAP
BACKGROUND
BACKGROUND
This week is all about CAD, honestly, this week was really hard for me because I`m not very good at CAD and that was my first time to use fusion software.
This week’s assignment is to Design an enclosure of a commercially available product for fabrication using Laser Cutting, 3D Printing, or both.
I choose to make Bluetooth Speaker by using a laser cutter machine only. and apply Screw joints technic.
OBJECTIVE #1: DESIGN
OBJECTIVE #1: DESIGN
first i made a skitch for the base then extrude it
then draw the sides on the base and made extrude to create the 4-sides of this box
made extrude to the base but with an offset to form the last part of the design
I sketched two circles and made extrude cut to make the speaker parts
Draw the part for the tap and the screw t in the enclosure
OBJECTIVE #2: fabrication
OBJECTIVE #2: fabrication
preparing the design files of the enclosure for fabrication
preparing the design files of the enclosure for fabrication
open laser work software and import the enclosure dxf file
select the parts that I want to make as cut and set the parameter as follow
downloading the rld file to the machine and perform the cut process
downloading the rld file to the machine and perform the cut process
VID_20210211_164853.mp4
Combining parts together
Combining parts together
CONCLUSION
CONCLUSION
What I learned this week is...
What I Learned What I Learned
to use CAD and fusion software
to prepare files for the laser cutter
to use the laser cutter machine
Advanced CAD techniques.
New fabrication skills.
Page updated
Report abuse