More information regarding DIY keyboards can be found linked here: Link
Note: Prices vary greatly when it comes to DIY keyboards even of the same model.
Price: $120-$160 WITHOUT KEYCAPS
Manufacturer: KBDFans
Model: NIU Mini
Switches: Aliaz, Gateron, Kailh, Cherry MX
Keycaps: Not included
Case Material: Aluminum and Acrylic
Backlighting/RGB: RGB Underglow (Optional Backlighting)
Detachable Cable: Yes
Other Notes:
This board can be purchased from KBDfans.com
LED's can be added by adding LEDs to your cart and then requesting in the comments for them to install them. Also, I would recommend that you also request for them to clip and lube the stabilizers.
This keyboard can be selected as Fully-Assembled, or as a DIY kit. To have the board fully assembed you need to add both the kit, and the NIU 40% Assembly service added to your cart. The DIY kit will require you to solder all of the switches onto the PCB. If you do go the DIY route, make sure to order switches.
Don't forget to buy keycaps.
Price: $150-$190 WITHOUT KEYCAPS
Manufacturer: KBDFans
Model: 5 Degree
Switches: Aliaz, Zeal, Gateron, Kailh, Cherry MX
Keycaps: NOT INCLUDED (depending on the model selected)
Case Material: Aluminum
Backlighting/RGB: (Optionally Backlit)
Detachable Cable: Yes
Other Notes: This board can be purchased from KBDfans.com
As a side note, there is an option to select GMK Stabilizers, these stabilizers are superior to the ones that come with the board otherwise, but are not necessary. They are something to consider though.
LED's can be added by adding LEDs to your cart and then requesting in the comments for them to install them. Also, I would recommend that you also request for them to clip and lube the stabilizers.
This keyboard can be selected as Fully-Assembled, or as a DIY kit. The DIY kit will require you to solder all of the switches onto the PCB. If you go the DIY route, make sure to purchase switches as well.
Also note, some fully assembled models come with keycaps.
Price: $160-$190 WITHOUT KEYCAPS
Manufacturer: KBDfans
Model: KBD661
Switches: Aliaz, Zeal, Gateron, Kailh, Cherry MX
Keycaps: NOT INCLUDED
Case Material: Aluminum
Backlighting/RGB: (Optionally Backlit)
Detachable Cable: Yes
Other Notes: This board can be purchased from KBDfans.com
As a side note, there is an option to select GMK Stabilizers, these stabilizers are superior to the ones that come with the board otherwise, but are not necessary. They are something to consider though.
LED's can be added by adding LEDs to your cart and then requesting in the comments for them to install them. Also, I would recommend that you also request for them to clip and lube the stabilizers.
This keyboard can be selected as Fully-Assembled, or as a DIY kit. The DIY kit will require you to solder all of the switches onto the PCB. If you go the DIY route, make sure to order switches as well.
Price: $180-$200
Manufacturer: KBDFans
Model: Tina A
Switches: Aliaz, Zeal, Kailh, Gateron, Cherry MX
Keycaps: PBT (Blank)
Case Material: Aluminum
Backlighting/RGB: (Optional Backlighting), Underglow
Detachable Cable: Yes
Other Notes: This board can be purchased from KBDfans.com
As a side note, there is an option to select GMK Stabilizers, these stabilizers are superior to the ones that come with the board otherwise, but are not necessary. They are something to consider though.
LED's can be added by adding LEDs to your cart and then requesting in the comments for them to install them. Also, I would recommend that you also request for them to clip and lube the stabilizers.
This keyboard can be selected as Fully-Assembled, or as a DIY kit. The DIY kit will require you to solder all of the switches onto the PCB.
I also want to note that the model under the fully assembled section (the one pictured) is in an hhkb layout, but if you go into the DIY Kit section you can choose between 3 different layouts (A, B, or C), and then if you go into the assembly service section you can choose for it to be fully assembled like this one. Remember though that if you go this route you will have to order keycaps as well. Also, don't forget to order switches if you go the DIY route.
Price: $100-$210
Manufacturer: KBDFans
Model: Tada68
Switches: Gateron, Zeal
Keycaps: Dye Sublimated PBT (For the model I am looking at and that is pictured.)
Case Material: Plastic or Aluminum (optional)
Backlighting/RGB: (Optionally Backlit)
Detachable Cable: Yes
Other Notes: This board can be purchased from KBDfans.com
I included this board twice in the list because you have the option to purcase one with either a plastic or aluminum case. It didn't seem fair to only have it posted in the lower price range, as some people looking for more expensive boards might have missed it.
As a side note, there is an option to select GMK Stabilizers, these stabilizers are superior to the ones that come with the board otherwise, but are not necessary. They are something to consider though.
LED's can be added by adding LEDs to your cart and then requesting in the comments for them to install them. Also, I would recommend that you also request for them to clip and lube the stabilizers.
This keyboard can be selected as Fully-Assembled, or as a DIY kit. The DIY kit will require you to solder all of the switches onto the PCB. If you do go the DIY route, it will come without keycaps, so you will have to purchase them. Also, don't forget to order switches if you go the DIY route.
Price: $180-$245 WITHOUT KEYCAPS
Manufacturer: KBDFans
Model: KBD75
Switches: Options from Gateron, Kailh, Cherry, Zeal, and Aliaz
Keycaps: NONE, will require purchase of keycaps separately
Case Material: Aluminum with an acrylic layer for underglow
Backlighting/RGB: Underglow, Backlighting LEDs can be added as well
Detachable Cable: Yes (does not come with the cable pictured)
Other Notes: This board can be purchased from KBDfans.com
As a side note, there is an option to select GMK Stabilizers, these stabilizers are superior to the ones that come with the board otherwise, but are not necessary. They are something to consider though.
LED's can be added by adding LEDs to your cart and then requesting in the comments for them to install them. Also, I would recommend that you also request for them to clip and lube the stabilizers.
This keyboard will be found as a DIY kit, but in the Assembly Service section, you can pay for them to assemble it. The DIY kit will require you to solder all of the switches onto the PCB. If you do the DIY kit, make sure to purchase switches.
Don't forget to buy keycaps, and since this is a 75% layout, you will have to find a set that is accommodating of that. They have some keycap sets on their website that would work well.
Price: $325-385 NOT INCLUDING KEYCAPS
Manufacturer: KBDFans
Model: KBD19X
Switches: Gateron, Kailh, Cherry MX, Zeal, Aliaz
Keycaps: NOT INCLUDED
Case Material: Aluminum (Stainless Steel or Brass Plate)
Backlighting/RGB: (Optional Backlighting)
Detachable Cable: Yes
Other Notes: This board can be purchased from KBDfans.com
As a side note, there is an option to select GMK Stabilizers, these stabilizers are superior to the ones that come with the board otherwise, but are not necessary. They are something to consider though.
LED's can be added by adding LEDs to your cart and then requesting in the comments for them to install them. Also, I would recommend that you also request for them to clip and lube the stabilizers.
This keyboard will be found as a DIY kit, but in the Assembly Service section, you can pay for them to assemble it. The DIY kit will require you to solder all of the switches onto the PCB. If you do the DIY kit, make sure to purchase switches.