Tutorials for Printing with Ultimaker 2+ Connect
(If you are looking for the articles that correspond to the handouts, scroll down toward the bottom.)
STEP 1
Your first step will be to export your file from TinkerCAD and import it into the slicing software "Cura".
You will need to export it as an .stl file
.
STEP 2
Slice your model in Cura
If you are doing this for the first time, you need to complete the assigned EdPuzzle :
Ultimaker Cura Tutorial and Basics (Beginner's Tutorial)
before you continue.
If you have already completed it, the video from the EdPuzzle is below in case you need to refer to it.
To SLICE a model for the Ultimaker 2+, take the steps described below.
Load the model into Cura by clicking the “Open File” folder icon (top left corner)
Use the Adjustment Tools to position, scale and rotate the object if desired
In the Sidebar, select the nozzle size and material you want to use. Make sure it matches the setup on the printer
Select a profile quality (Draft Print, Fast Print, Normal Quality or High Quality) on the Sidebar
Select “Helper Parts” on the Sidebar. Set the desired strength and enable or disable support* and build plate adhesion
To view the result of the selected profile and support settings, go to the “View mode” and select “Layers”
In the bottom right corner, select “Save to file” or “Save to Removable Drive” to save the print file
*Which supports you choose to use will be very important in determining how your print turns out and how much time you have to spend to remove the supports.
For help on this scroll down this page to the slide deck:
Ultimaker Cura Suport Settings for Easy Removal of Support Material.
This (above) links to an excellent article to get you started on your first print.
STEP 3
Fill out a print card and get it signed.
We have four Ultimakers and shared supplies. All student must hav permission to build a print on a machine before doing so.
.
.
Want to save time and have a high quality print surface?
<-----------------
This is the slide deck for you.
Z Distance 0.23
x/y distance 0.7
Other ways to save time, over here
---------------------->
Articles that correspond to the handouts.
Preparing and Printing with Ultimaker 2+
Article: Preparing and Printing with Ultimaker 2+.docxThis is the article for the handout:
Preparing a print file for the Ultimaker 2+
and
Printing with the Ultimaker 2+
.
Using Glue on the Ultimaker Glass Plate
for adhesion of print to plate
Use this article for the :
-------------------->
Using glue on the Ultimaker 2 QUIZ
.