For this assignment you will be creating straight and curved (arc) lines. A polyline is a connected sequence of line segments created as a single object. You can create straight line segments, arc segments, or a combination of the two.
Height of 2 Inches
SCALE<enter
Select object<enter
Select base point (Anywhere)
R<Enter (or click the word "reference"
Select the bottom of the PB
Select the top of the PB
Specfy new length as "2" <enter
Change your line color if needed
Line (L) = Straight Line
Arc (A) = Curved line
ALT = Change direction of the path
Add dimensions onto your drawing - Looking to verify your PB height of 2 inches
** If your drawing is not exactly 2 inches, you must SCALE it again**
CHANGE TO CONCEPTUAL VIEW!!
Select all your P-Lines and join them using the join command
Select the PB and use the Presspull command - 1/4 height
Upload multiple screenshots into google classroom
AND your .DXF file. One Top view. One Side view.
** MAKE SURE YOUR DIMENSION IS IN YOUR SCREEN SHOT!!!***
10 pts Polyline: Student used straight and curved lines to recreate the PB logo
10 pts Scale/Dimensions: Student's design is scaled to EXACTLY 2 units. The dimension is clear in the screenshot
10 pts Presspull: Student joined all of their polylines together, and used the presspull command. Height of the PB is .25
5 pts Time: Student worked diligently to complete the assignment, and the assignment is submitted on time.
5 pts Submit: 1 Top view and 1 top left corner view screen shot. ANDDD.. and.. your .DXF file
--------------------------
40 points total