Here is a series of videos that will take your through the process of designing a robot in Fusion 360. The robot is not specifically designed to get out of a labyrinth, but these lessons will teach you how to go about creating a model in Fusion 360. Do not skip these tutorials as they will enable to to avoid a world of pain caused by you not knowing how to use the software properly.
Also remember that if you have no idea what you are creating, Fusion is not the best place to start. You may be better to start off by drawing some really rough sketches of what you might like your robot to look like.
This one shows you how to create a new project folder and get started on a design.
This one shows you how to create new components and add them to your design. Don't skip. This is important. This one helps you to avoid a world of pain later on.
Remember you can always click on the Youtube symbol at the bottom of the movie frame if you want to see an enlarged version of the video.
This one shows you how to make the metal bracket for attaching the motor to the robot. It also shows how to join components together, which you will want to do if you don't want your design self-destructing on you.
This one shows you how to use the parts library which is on the Pak College Robotics web site. Quite useful if you don't want to draw all your parts from scratch.
This one shows you how to attach a library component to your design, using both fixed and revolute joints. Important if you have moving parts in your design.
This one shows you how to make a tray for mounting the Arduino on. Tray is made to fit the robot perfectly. It also shows how to insert motors and wheels from library into your design.
This one shows you how to add a tilting table to you robot that can actually tilt. It also shows you how to add colours and textures to the components of your robot.
This one shows you how to do all the tricky parts of making an omniwheel.