Senior ECE student with emphasis on computer engineering and computer architecture. I have plenty of experience with embedded system programming, and looking forward to contribute to this team for senior design.

Main role in the team is to handle the PCB design, communication from micro controller, and also came up with the solution for the non volatile memory need for our project. I also supported the team in completing group assignments which were extensive through out the whole academic year. Here is the list of the blocks I worked on:

• PCB block
• Micro-controller
• EEPROM memory block
• Communication from micro controller to Raspberry Pi

Fifth year student studying Applied Computer Science. I currently work as a Junior Developer at the Center for Applied Systems and Software here at OSU and have been programming for seven years.

My role in the project was to handle the GUI code. I created a web server which takes in the data coming from the micro-controller and outputs it to our GUI. It also takes in values from users when they set new values for the project and then sends it to the micro-controller.

• Raspberry Pi
• Web Server
• GUI

I am a senior Electrical and Computer Engineering student studying at Oregon State University. I have experience in embedded programming, circuit design and testing and programming to this important project.

My main role in the project was to find and test the high accuracy magnetic position sensor, design and validate the algorithm for determining the alignment of the HUD and develop the embedded code for the microprocessor to process all of the sensor data. The engineering blocks I completed include:

• Magnetic Sensor
• Micro-controller
• Sensor Decoder
• Sensor Calibration

I am a fourth year student at Oregon State University studying for a Bachelor on Electrical and Computer Engineering with a Computer Science Minor. I look forward to apply my experience with Digital and Analog Design to this project. As a Certified Private Pilot, I am eager to learn and make contributions to the field of aviation.

My main role in the project was to program the serial UART communication in the Raspberry Pi, the communication between the webserver and the UART program, and design and fabricate the Enclosure for the system. Engineering blocks I completed include:

• Communication from Raspberry Pi to Micro-controller
• System Enclosure
• Raspberry Pi