Embedded Files
Table of Contents
Table of Contents
Project Files
Project Files
31 Trick Or Treat Bags
31 Trick Or Treat Bags
Difficulty: ★★
Minimum Requirements: 40W
Raw Materials: Acrylic and or Wood / Leather and or Fabric
Optional: Paint / Stain
Estimated Laser Time: 5-20 Min
Safety First: Ensure workspace is free of fire, electrical and other safety hazards. Be aware of all safety issues when cutting materials with a laser. Always have a fire extinguisher on hand
Power on the laser and all of its components.
Ensure that:
- The laser is powered and the boot up cycle begins on the screen.
- The cooling system is connected properly and water is flowing through the tube.
- The air compressor is powered and exhausting air to the laser head.
- The exhaust system is on and vented into a safe location.Connect to RetinaEngrave 3.0 software using your machine’s touch screen to copy the software IP address into your favorite browser. The Wired IP address is displayed at the bottom of your touch screen.
Import your design and adjust power and speed settings. Double check settings including the number of passes and cut order.
Insert material into the laser bed. Use the focus tool to adjust to the top of the material. Focusing should be done each time a new material is introduced.
Use the “Perimeter” function to ensure that the file will fit within the cutting area. Adjust accordingly.
Run the job file. Do not leave a job running unattended.
CUT
Import the included files and cut all the pieces from their respective materials. This file contains vector cuts and engravings.
32 Halloween Wreath
32 Halloween Wreath
Difficulty: ★
Minimum Requirements: 40W
Raw Materials: Maker's Choice
Optional: Paint / Stain
Estimated Laser Time: 50-120 Min
Safety First: Ensure the workspace is free of fire, electrical, and other safety hazards. Be aware of all safety issues when cutting materials with a laser. Always have a fire extinguisher on hand
Power on the laser and all of its components.
Ensure that:
- The laser is powered, and the boot-up cycle begins on the screen.
- The cooling system is connected properly, and water is flowing through the tube.
- The air compressor is powered and exhausting air to the laser head.
- The exhaust system is on and vented into a safe location.Connect to RetinaEngrave 3.0 software using your machine’s touch screen to copy the software IP address into your favorite browser. The Wired IP address is displayed at the bottom of your touch screen.
Import your design and adjust power and speed settings. Double-check settings, including the number of passes and cut order.
Insert material into the laser bed. Use the focus tool to adjust to the top of the material. Focusing should be done each time a new material is introduced.
Use the “Perimeter” function to ensure that the file will fit within the cutting area. Adjust accordingly.
Run the job file. Do not leave a job running unattended.
CUT
Import the included files and cut all the pieces from their respective materials. This file contains vector cuts and engravings.
33 Frankenstein Inlay Poster
33 Frankenstein Inlay Poster
Difficulty: ★
Minimum Requirements: 40W
Raw Materials: Maker's Choice
Optional: Paint / Stain
Estimated Laser Time: 30-75 Min
Safety First: Ensure workspace is free of fire, electrical and other safety hazards. Be aware of all safety issues when cutting materials with a laser. Always have a fire extinguisher on hand
Power on the laser and all of its components.
Ensure that:
- The laser is powered and the boot up cycle begins on the screen.
- The cooling system is connected properly and water is flowing through the tube.
- The air compressor is powered and exhausting air to the laser head.
- The exhaust system is on and vented into a safe location.Connect to RetinaEngrave 3.0 software using your machine’s touch screen to copy the software IP address into your favorite browser. The Wired IP address is displayed at the bottom of your touch screen.
Import your design and adjust power and speed settings. Double check settings including the number of passes and cut order.
Insert material into the laser bed. Use the focus tool to adjust to the top of the material. Focusing should be done each time a new material is introduced.
Use the “Perimeter” function to ensure that the file will fit within the cutting area. Adjust accordingly.
Run the job file. Do not leave a job running unattended.
CUT
Import the included files and cut all the pieces from their respective materials. This file contains vector cuts and engravings.
34 The Kraken
34 The Kraken
Difficulty: ★★
Minimum Requirements: 90W
Raw Materials: 1/4" wood, Light fixture, Bulb
Optional: Paint / Stain
Estimated Laser Time: 37-150 Min
Safety First: Ensure workspace is free of fire, electrical and other safety hazards. Be aware of all safety issues when cutting materials with a laser. Always have a fire extinguisher on hand
Power on the laser and all of its components.
Ensure that:
- The laser is powered and the boot up cycle begins on the screen.
- The cooling system is connected properly and water is flowing through the tube.
- The air compressor is powered and exhausting air to the laser head.
- The exhaust system is on and vented into a safe location.Connect to RetinaEngrave 3.0 software using your machine’s touch screen to copy the software IP address into your favorite browser. The Wired IP address is displayed at the bottom of your touch screen.
Import your design and adjust power and speed settings. Double check settings including the number of passes and cut order.
Insert material into the laser bed. Use the focus tool to adjust to the top of the material. Focusing should be done each time a new material is introduced.
Use the “Perimeter” function to ensure that the file will fit within the cutting area. Adjust accordingly.
Run the job file. Do not leave a job running unattended.
CUT
Import the included files and cut all the pieces from their respective materials. This file contains vector cuts and vector marks.
35 Edge Lit Acrylic Light
35 Edge Lit Acrylic Light
Difficulty: ★★
Minimum Requirements: 90W
Raw Materials: 1/8" Acrylic, LED Strip, Power Supply
Optional: Paint
Estimated Laser Time: 50-65 Min
Safety First: Ensure the workspace is free of fire, electrical, and other safety hazards. Be aware of all safety issues when cutting materials with a laser. Always have a fire extinguisher on hand
Power on the laser and all of its components.
Ensure that:
- The laser is powered, and the bootup cycle begins on the screen.
- The cooling system is connected properly, and water flows through the tube.
- The air compressor is powered and exhausting air to the laser head.
- The exhaust system is on and vented into a safe location.Connect to RetinaEngrave 3.0 software using your machine’s touch screen to copy the software IP address into your favorite browser. The Wired IP address is displayed at the bottom of your touch screen.
Import your design and adjust power and speed settings. Double-check settings, including the number of passes and cut order.
Insert material into the laser bed. Use the focus tool to adjust to the top of the material. Focusing should be done each time a new material is introduced.
Use the “Perimeter” function to ensure that the file will fit within the cutting area. Adjust accordingly.
Run the job file. Do not leave a job running unattended.
CUT
Import the included files and cut all the pieces from their respective materials. This file contains vector cuts and engravings.
Finally, enjoy your creation, and keep making!
Create the all-knowing Zoltar to light up your day. and NIGHT!
Alternatively, you could make a 3D illusion with the wire-frame face and base.
No matter which edge-lit light you choose, you must make a base to hide the LED and wiring.
You can use a battery or a plug setup to power your LEDs.
The wiring is very straightforward in any case.
Finally, enjoy your creation, and keep making!
Create the all-knowing Zoltar to light up your day.
Page updated
Report abuse