QuiCK START

Quick GUIDE to start easywind


Plug and Connect


Parts:

  • Reception unit ( black box)

  • Power cable (thin-one with 4 holes)

  • Data Cable (Long cable with both ends, sensor and reception unit)


Connect the power cable and the reception unit. If you don't have battery pack included connect the other end to a 12V battery. Recomended to add a Fuse of 1A.


More info: Connect to a external battery


Click the red button until is it in "hold" position as in the picture to start the unit

Connect the sensor cable to the reception unit.

Connect the sensor cable the the airmar unit

Access the aplication

  1. Start your Tablet/Phone/Computer

  2. Check available WIFI. The default name will EWPXXX were XXX is your unit ID

  3. Connect, default password: easywind

  4. Open a web browser and type: http://easywindparis.local

  5. You are ready to go!


More info: Acces the aplication

Connect the unit to internet

To connect the unit to internet you can use an external wifi.

      1. Go to settings

      2. Open the WIFI

      3. Add SSID and password (be aware upper and lower case is important in both, SSID and password)

      4. Add wifi connection


More info: Connect the unit to internet