installation
Sensor placement
Sensor placement
1. Fix the sensor base upon a wind mast in the support boat.
*The recommended mast high is 2.5 - 3 meters above sea level. Depending on the motor boat that is placed.
2.Make sure the sensor dent exactly matches the bow of the support boat.
In order to ensure this, once EasyWind is connected and working, GOTO the BOAT CONDITIONS MENU, and, check that the boat’s heading (not COG) matches a manual compass reading or known bearing.
Once you are outside and moving you can also check heading and COG it must be simillar. Beaware there is a difference if currents involved in the equation