Description:
This is the second section of a two part assignment. In this assignment you will create the three 3D parts as shown in the link below.
Process:
1. Use the blank OnShape document called "Lastname CAD Parts Assignment 02" you created in Lesson 04.
2. Confirm you have the measurements set to Metric.
3. Use the link below and create the three 3D parts as shown. Each part needs to be in its own tab named according to the conventions below:
3D-1
3D-2
3D-3
Create a Google Doc called "OnShape Part Assignment 02". Take two screenshots of the part and place them on the Google Doc. Submit the Google Doc and the link to your OnShape Document to the Google Classroom.
Directions:
https://nebomusic.net/ftc/OnShape_Part_Assignment_02.pdf
Extension Assignment:
If you have done these parts as part of FRC or previous classes, do the following:
3D-6
3D-8
3D-9
Part drawings can be found at: https://nebomusic.net/ftc/2D_and_3D_Drawing_Projects.pdf