SDG 12 - RESPONSIBLE CONSUMPTION AND PRODUCTION ( 2025-2026 EVEN SEM)

6/2/2026

Title :Electrical Wiring for domestic and Commercial building

Organizer :Ms.Aswathy Mariam Mohan

Event Type :Expert Talk

Description: The activity enabled participants to gain both theoretical knowledge and practical skills related to electrical wiring systems in domestic and commercial buildings. Participants developed the ability to design, install, and troubleshoot basic wiring circuits in accordance with safety standards.

They acquired hands-on experience in selecting appropriate wiring materials, understanding load distribution, and implementing protection devices such as MCBs and earthing systems. The activity also enhanced their awareness of electrical safety practices, fault identification, and maintenance techniques.

27/03/2026

Title:Fault Analysis in Power systems Using MATLAB

Organizer :Ms.Aswathy Mariam Mohan

Event Type :Expert Talk

Fault analysis using MATLAB, particularly in power systems and transmission networks, involves modeling electrical systems to simulate and analyze transient behaviors during faults. Techniques often involve the use of MATLAB/Simulink and the Sims cape Electrical toolbox to create 3-phase systems and simulate both symmetrical and unsymmetrical faults.

24/03/2026

Title:Energy Conservation Measures and their Societal Impacts

Organizer:Ms.Asifa Rehman

Event Type :Seminar

Description:This activity create participants an awareness and understanding of energy conservation measures, their applications across sectors, and their societal , economic and environmental impacts while promoting sustainable energy practices.

02/03/2026

Title:Ethical and Responsible Implementation of Demand Side Management in Power Utilities

Organizer:Asifa Rehman

Event Type:Expert Talk

Participants gained an understanding of the principles and applications of Demand Side Management (DSM) in modern power utilities. They learned about the ethical and responsible implementation of energy management strategies to improve energy efficiency, reduce peak demand, and support sustainable power system operation. The session also enhanced awareness of consumer rights, environmental responsibility, and the role of DSM in achieving sustainable energy goals.

13/04/26

Title: Familiarization of starters in induction motors

Organizer: Jolly George

Event Type: Expert talk

This session provides an introduction to the various starters used in induction motors and their importance in limiting high starting current, protecting the motor, and ensuring smooth operation. Participants will gain knowledge about different types of starters such as Direct-On-Line (DOL), Star-Delta, Auto-Transformer, and Soft Starters, along with their working principles, applications, advantages, and selection criteria. The program aims to enhance practical understanding of motor starting methods widely used in industrial electrical systems.

09/04/2026

Title : Induction Motor Starters: Types, Operation and Applications

Organizer : Krishna Priya T.K

Event Type :Expert Talk

Description: This expert talk aims to study the different types of induction motor starters, including DOL, Star-Delta, Auto-Transformer, Soft Starters, and Variable Frequency Drives (VFDs). The session will also explore their operating principles, selection criteria, industrial applications, and recent advancements in motor starting technologies. This knowledge will strengthen their theoretical foundation, enhance their practical understanding of electrical machines, and improve their readiness for higher studies, research, and careers in the electrical and automation industries.

05-06-2026

Title - Frames for the Future

Organizer - Dr. Devika Sarath

Event Type - Photography competition

Description:A photography competition was organized in connection with Environment Day to raise awareness about environmental conservation and encourage participants to showcase nature and sustainability through creative photography

01-12-2025 to 05-12-2025

Title: IOT Data Analytics and Prediction System using Python

Organizer : Dept. Of ECE

Event Type : 5 day Workshop

Description:This workshop introduced participants to techniques for analyzing IoT-generated data and developing predictive models using Python for intelligent decision-making."

5-6-2026

Title : Climate Action Starts with Us

Organiser :Dept.of Computer Applications

Event type : Poster Making Competition

Description : Department of Computer Applications, Mangalam College of Engineering organized a Poster Making Competition on the theme "Climate Action Starts with Us" on 05 June 2026 in association with SDG . The event aimed to create awareness among students about environmental sustainability, climate change, and the importance of individual responsibility in protecting the planet

10-04-2026

Title: Expert talk on Introduction to Polymers & Conducting Polymers.

Organizer: Department of Mechanical Engineering, Mangalam College of Engineering

Event Type: Expert Talk

Description: An expert talk on “Introduction to Polymers and Conducting Polymers” was delivered by Dr. Ajith Cherian John, Associate Professor, Department of Basic Sciences on 10-04-2026. The session provided an overview of polymer science, including the classification, structure, properties, and applications of various polymers used in engineering and everyday life. Special emphasis was given to conducting polymers, their unique electrical properties, synthesis methods, and emerging applications in electronics, sensors, energy storage devices, and biomedical fields

21/02/2026

SEM Analysis of Special Structure

Department of Civil Engineering, Mangalam College of Engineering (IIC & ICI Student Chapter)

Expert Talk (Online)

Expert session on the application of Finite Element Method (FEM) and Structural Engineering Modeling (SEM) techniques for analyzing complex and special structures.

25/02/2026

Environmental Management Plan Framework & Importance of Environmental Monitoring

Department of Civil Engineering, Mangalam College of Engineering (IIC & ICI Student Chapter)

Expert Talk (Online)

Session covering environmental management planning, regulatory compliance, environmental monitoring techniques, and sustainable project implementation.

27/02/2026

Lean Construction & Last Planner System

Department of Civil Engineering, Mangalam College of Engineering (IIC & ICI Student Chapter)

Expert Talk (Online)

Industry-oriented lecture on Lean Construction principles and the Last Planner System for improving project productivity, workflow reliability, and waste reduction.

03-03-2026

Biodrying Process of Municipal Solid Waste

Department of Civil Engineering, Mangalam College of Engineering (IIC & ICI Student Chapter)

Expert Talk (Online)

Technical session on biodrying technology for municipal solid waste management, resource recovery, waste volume reduction, and sustainable waste treatment practices.

28/03/2026

Optimization in Concrete Design

Department of Civil Engineering, Mangalam College of Engineering

Online Expert Talk / Technical Seminar

An online session on optimization techniques in concrete design. Resource person: Dr. Gautham Kisore Reddy. The program focused on advancing knowledge in civil engineering, research, innovation, and sustainable development.

21/03/2026

Title : Expert Talk on,"Introduction to Nanoscience and the emerging world of 2D Materials"

Organiser : Department of Basic Science and Humanities

Event type : Webinar

Description : This session helps students understand emerging research trends and potential career opportunities in advanced materials science and technology.

10-4-2026

Title : Expert Talk on, "Introduction to Polymers and Conducting Polymers"

Organiser : Department of Basic Science and Humanities

Event type : Webinar

Description : This session provides a comprehensive overview of both conventional polymers and the specialized class of conducting polymers. It will provide a foundational understanding of polymers, covering their molecular structure, properties and wide-ranging applications in everyday life.

16/12/2025

Title:Poster Competition on Energy Conservation.

Organiser : Department of Chemical Engineering and Civil Engineering

Event type : Competition

Description : Provides awareness on energy conservation.

3/10/2026

Title :Project Exhibition

Organiser :Dept.of CSE in association with CSI & ACM

Event Type : Technical Exhibition & Innovation Showcase

Description :The Project Exhibition was organized to provide students with a platform to showcase their innovative ideas, technical skills, and project development capabilities. The event encouraged participants to present working models and software or hardware projects based on emerging technologies and real-world applications. Students demonstrated creativity, problem-solving ability, and teamwork through their projects. The exhibition also promoted knowledge sharing, technical interaction, and awareness of recent advancements in the field of computer science and engineering.

15/02/2026

Title: Expert talk on Role of Compilers in Modern Languages

Organiser :Dept.of CSE in association with CSI & ACM

Event type : Expert talk

Description : The Department of Computer Science & Engineering, in association with CSI and ACM, organized an expert talk on "Role of Compilers in Modern Languages" to provide students with insights into the significance of compiler design and implementation in contemporary programming languages. The session covered the fundamental concepts of compilers, their role in code optimization, language translation, and execution efficiency. The resource person highlighted recent advancements in compiler technologies and their applications in modern software development. The talk enhanced students' understanding of programming language processing and encouraged them to explore advanced topics in compiler construction and system software.

20/02/2026

Title: Expert talk on entrepreneurship awareness Program

Organiser :Dept.of CSE in association with CSI & ACM

Event type : Expert Talk

Description : The Department of Computer Science & Engineering, in association with CSI and ACM, organized an Expert Talk on Entrepreneurship Awareness Program to inspire students to explore entrepreneurial opportunities and develop an innovative mindset. The session provided insights into the fundamentals of entrepreneurship, startup ecosystem, business planning, funding opportunities, and the challenges involved in launching and managing a venture. The resource person shared practical experiences and success stories, motivating students to transform their ideas into viable business solutions. The program enhanced participants' awareness of entrepreneurship as a promising career path and encouraged them to cultivate leadership, creativity, and problem-solving skills.

04/06/2026

Title: Best out of Waste Competition

Organiser: Dept.of CSE

Event type: Competition

Description: As part of World Environment Day 2026, the Department of Computer Science and Engineering is organizing a “Best Out of Waste” competition to encourage creativity, innovation, and environmental responsibility among students. Participants are invited to create useful and attractive items using waste or recyclable materials and submit photographs of their creations. The event aims to promote sustainable living by demonstrating how discarded materials can be transformed into valuable products through creative thinking.

30/3/2026

Title:AI -BASED PROCESS SCHEDULING AND RESOURCE ALLOCATION IN OPERATING SYSTEMS

Organizer:Anjana A A

Event Type: Expert Talk

Description : The activity aims to introduce students to emerging trends in integrating Artificial Intelligence with Operating Systems,focusing on AI-based process scheduling and resource allocation .It also intends to bridge the gap between academic learning and industry practices by providing exposure to real world applications and research directions.

04/01/2026

Title:Control Logic Design in Processor

Organizer: Nair S Rajlaxmi

Event Type:Expert Talk

Description : To provide students with a comprehensive understanding of control logic design in processors ,including the working of control units , sequencing of micro-operations and the implementation of hardwired and microprogrammed control.The session provide conceptual clarity and bridge the gap between theoretical knowlege and practical processor design.

SDG 12 - RESPONSIBLE CONSUMPTION AND PRODUCTION ( 2025-2026 ODD SEM)

6/2/2026

21/08/2025

Title : Art & Craft 

Organiser :DCAI in association with AIMERS &CSI

Event type : Workshop and skill development

Description :The Art and Craft Workshop is a creative and hands-on session designed to encourage self-expression, imagination, and artistic skills among participants. This workshop provides an opportunity to explore various art forms and craft techniques using easily available materials. Participants will learn to create beautiful, eco-friendly, and innovative artworks while developing patience, focus, and aesthetic appreciation.

3/7/2025

Title :  Art Competition-Plastic Rebirth

Organiser :Dept.of CHE 

Event type : Competition among students.

Description : A department level program to promote skill development by utilizing waste plastic materials for making art materials.

17/10/2025

Title: Expert Talk on 'From Shelf to Screen: The Evolution of Modern Retail' and 'Building a Brand that Sticks: The Psychology Behind Great Branding' 

Organiser: Dept. of Management Studies

Event type: Expert Talk

Description: Expert Talk on the topics 'From Shelf to Screen: The Evolution of Modern Retail' and 'Building a Brand that Sticks: The Psychology Behind Great Branding' were conducted for S3 MBA students at Digital Theatre, Mangalam College of Engineering on 17-10-2025 (Friday). The speaker for the session was Dr. Mishel Elizabeth Jacob (Head of the Department, Management Studies, Baselius College, Kottayam). The session was a fresh experience for the students to interact and gain insights about Great Branding and Modern Retail Management.

5/8/25

Title :Elecrical Circuit Fault Diagonisis

Organiser :Dept.of EEE 

Event type : Expert Talk

Description :To equip students with the necessary diagonostic and analytical skills required to detect and resolve faults in electrical circuits. The session aims to connect theoretical concepts with real world circuit behaviour and safety practices

12/9/25

Title : Kseb LT Billing and Tariff

Organiser :Dept.of EEE 

Event type :Industrial interaction session 

Description :The Industrial Interaction Session on “KSEB LT Billing and Tariff” is designed to provide students with practical insights into electricity billing, tariff structures, and utility operations. This session will help bridge the gap between the theoretical knowledge of Power System I (EET301) and real-world applications in the power sector. Students will gain an understanding of how tariffs are calculated, billing procedures are implemented, and regulatory frameworks are applied in practice. The session also offers an interactive platform with the expert, allowing students to clarify doubts and relate course concepts to industry practices.

26/07/2025

Title :Energy  and Mobility for Future

Organiser :Dept.of EEE in Association with IEEE

Event type : Expert Talk

Description : This expert talk focuses on the transformative changes in the global energy and transportation sectors driven by sustainability, electrification, and digitalization. The session cover advancements in electric vehicles, energy storage, smart grids, and clean energy technologies

31/7/2025

Title : Industrial visit for S5 (2023-27) Mechanical Engineering Students at TOMS Pipes, Changanassery         

Organiser :Department of Mechanical Engineering

Event type : Industrial Visit

Description : Industrial visit for 3rd year mechanical students to TOMS pipes Changanassery Kottayam. The objective of the visit is to observe and learn about the complete process of pipe manufacturing  from the raw material selection to finished product testing and packaging and to study the use of modern machinery and technologies in the production line.

18/8/2025

Title : Session on 3D Printing     

Organiser : Department of Mechanical Engineering

Event type :  Expert talk

Description : Provided Students with awareness about the importance of additive manufacturing and types of 3D printing.

04-07-2025  & 05-07-2025

Title : Workshop on Computer aided design and manufacturing using Fusion 360

Organiser :Department of Mechanical Engineering

Event type : Workshop

Description : The workshop aimed to provide hands-on exposure to modern design and manufacturing tools. The session was led by Mr Wintson Thomas from BIMIT- CAD and BIM Training Servises. The workshop covered Fusion 360 environment, 3D modeling, assemblies, rendering and collaborative cloud based design.

6/11/2025

Title : Expert Talk on, "Introduction to Polymers and Conducting Polymers"

Organiser : Department of Basic Science and Humanities

Event type : Webinar

Description : This session provides a comprehensive overview of both conventional polymers and the specialized class of conducting polymers. It will provide a foundational understanding of polymers, covering their molecular structure, properties and wide-ranging applications in everyday life.

20/10/2025

Title : Expert Talk on, "The Economy in Numbers: A look at GDP, GNP and NNP"

Organiser : Department of Basic Science and Humanities

Event type : Webinar

Description : This session helps understand how to measure a country's economic output, differing in their scope and accounting for depreciation.