Bluetooth 藍牙模組 HC-05 設定
[材料]
[材料]
Arduino主板 x 1
藍牙模組 HC-05
/*
BlueTooth 藍牙模組
VCC to arduino 5v
GND to arduino GND
RXD to arduino D11
TXD to arduino D10
KEY to arduino 3.3v
*/
#include <SoftwareSerial.h>
SoftwareSerial BTSerial(10, 11); // RX | TX
void setup()
{
Serial.begin(9600);
Serial.println("Enter AT commands:");
BTSerial.begin(38400);
}
void loop()
{
if (BTSerial.available())
Serial.write(BTSerial.read());
if (Serial.available())
BTSerial.write(Serial.read());
}
設定:將Arduino連接電腦,並上傳程式碼後,進入AT模式。
[如果藍牙模組上,有一個小按鈕,要先按住按鈕,再把usb線接上電腦,之後再放開按鈕。]
1. 輸入 AT
回應:
OK
2. 查詢版本,輸入 AT+VERSION
回應:
+VERSION:2.0-20100601
OK
3. 查詢名稱,輸入 AT+NAME?
回應:
+NAME:HC-05
OK
4.更改名稱,輸入 AT+NAME=名稱
回應:
OK